Schneider Electric LP5K0901BW3, EAN: 3389110501650

Schneider Electric LP5K0901BW3 Contactor 3p+1N 24VDC

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LP5K0901BW3 Contactor 3p+1N 24VDC

Lieske Part No. 495484
Mfg Part No LP5K0901BW3
EAN-Code 3389110501650
Manufacturer Schneider Electric
Here only 143,97 EUR
171,32 EUR incl. VAT

Further information for Schneider Electric LP5K0901BW3 Contactor 3p+1N 24VDC

Complementary
Coil technologyBuilt-in bidirectional peak limiting diode suppressor
Control circuit voltage limitsOperational: 0.7...1.30 Uc (at
Inrush power in W1.8 W (at 20 °C)
Hold-in power consumption in W1.8 W at 20 °C
Heat dissipation1.8 W
Auxiliary contacts typetype instantaneous 1 NC
Minimum switching current5 mA for signalling circuit
Minimum switching voltage17 V for signalling circuit
Non overlap distance0.5 mm
Insulation resistance> 10 MOhm for signalling circuit
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20 conforming to VDE 0106
Protective treatmentTC conforming to IEC 60068; TC conforming to DIN 50016
Ambient air temperature for operation-25…50 °C
Ambient air temperature for storage-50…80 °C
Operating altitude2000 m without derating
Flame retardanceV1 conforming to UL 94; Requirement 2 conforming to NF F 16-101; Requirement 2 conforming to NF F 16-102
Height58 mm
Width90 mm
Depth57 mm
Net weight0.49 kg
Logistical informations
Country of originFR
Main
RangeTeSys
Product nameTeSys K
Product or component typeReversing contactor
Device short nameLP5K
Device applicationControl
Contactor applicationMotor control; Resistive load
Utilisation categoryAC-3; AC-1; AC-4; AC-3e
Device presentationPreassembled with reversing power busbar
Poles description3P
power pole contact composition3 NO
[Ue] rated operational voltagePower circuit: 690 V AC 50/60 Hz; Signalling circuit:
[Ie] rated operational current20 A (at
Motor power kW2.2 kW at 220...230 V AC 50/60 Hz; 4 kW at 380...415 V AC 50/60 Hz; 4 kW at 440 V AC 50/60 Hz; 4 kW at 480 V AC 50/60 Hz; 4 kW at 500...600 V AC 50/60 Hz; 4 kW at 660...690 V AC 50/60 Hz
Control circuit typeDC low consumption
[Uc] control circuit voltage24 V DC
Auxiliary contact composition1 NC
[Uimp] rated impulse withstand voltage8 kV
Overvoltage categoryIII
[Ith] conventional free air thermal current20 A (at 50 °C) for power circuit; 10 A (at 50 °C) for signalling circuit
Irms rated making capacity110 A AC for power circuit conforming to NF C 63-110; 110 A AC for power circuit conforming to IEC 60947; 110 A AC for signalling circuit conforming to IEC 60947
Rated breaking capacity110 A at 415 V conforming to IEC 60947; 110 A at 440 V conforming to IEC 60947; 80 A at 500 V conforming to IEC 60947; 110 A at 220...230 V conforming to IEC 60947; 110 A at 380...400 V conforming to IEC 60947; 70 A at 660...690 V conforming to IEC 60947
[Icw] rated short-time withstand current90 A 50 °C - 1 s for power circuit; 85 A 50 °C - 5 s for power circuit; 80 A 50 °C - 10 s for power circuit; 60 A 50 °C - 30 s for power circuit; 45 A 50 °C - 1 min for power circuit; 40 A 50 °C - 3 min for power circuit; 80 A - 1 s for signalling circuit; 90 A - 500 ms for signalling circuit; 110 A - 100 ms for signalling circuit; 20 A 50 °C - >= 15 min for power circuit
Associated fuse rating25 A gG at
Average impedance3 mOhm - Ith 20 A 50 Hz for power circuit
[Ui] rated insulation voltagePower circuit: 600 V conforming to UL 508; Power circuit: 690 V conforming to IEC 60947-4-1; Signalling circuit: 690 V conforming to IEC 60947-4-1; Signalling circuit: 690 V conforming to IEC 60947-5-1; Signalling circuit: 600 V conforming to UL 508; Power circuit: 600 V conforming to CSA C22.2 No 14; Signalling circuit: 600 V conforming to CSA C22.2 No 14
Electrical durability1.3 Mcycles 9 A AC-3 at Ue
Interlocking typeMechanical
Mounting supportRail; Plate
StandardsEN/IEC 60947-4-1; GB/T 14048.4; UL 60947-4-1; CSA C22.2 No 60947-4-1; JIS C8201-4-1
Product certificationsCB Scheme; CCC; UL; CSA; EAC; CE; UKCA
Connections - terminalsScrew clamp terminals 1 cable(s) 1.5…4 mm²solid; Screw clamp terminals 1 cable(s) 0.75…4 mm²flexible without cable end; Screw clamp terminals 1 cable(s) 0.34…2.5 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 1.5…4 mm²solid; Screw clamp terminals 2 cable(s) 0.75…4 mm²flexible without cable end; Screw clamp terminals 2 cable(s) 0.34…1.5 mm²flexible with cable end
Tightening torque0.8…1.3 N.m - on screw clamp terminals Philips No 2; 0.8…1.3 N.m - on screw clamp terminals flat Ø 6 mm; 0.8…1.3 N.m - on screw clamp terminals pozidriv No 2
Operating time10...20 ms coil de-energisation and NO opening; 30...40 ms coil energisation and NO closing
Safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
Mechanical durability5 Mcycles
Maximum operating rate3600 cyc/h
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height6.500 cm
Package 1 Width9.200 cm
Package 1 Length6.000 cm
Package 1 Weight450.000 g
Unit Type of Package 2S02
Number of Units in Package 220
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight9.334 kg
Unit Type of Package 3P06
Number of Units in Package 3160
Package 3 Height45.000 cm
Package 3 Width60.000 cm
Package 3 Length80.000 cm
Package 3 Weight83.820 kg
The Schneider Electric TeSys K-reversing contactor LP5K0901BW3 is a 3-pole contactor for controlling electric drives and resistive loads. It is specifically designed for motor applications, with a maximum motor power of 4 kW at 400 V AC (AC-3). The device features a 24 V DC coil with low power consumption, suitable for actuation via programmable control outputs. The coil is equipped with overvoltage protection, enhancing reliability in industrial environments. The rated operational voltage is 690 V AC at 50/60 Hz, and the rated operational current is 20 A. The rated insulation voltage is 690 V for the power circuit and signal circuit according to IEC 60947-4-1, as well as 600 V according to UL 508 and CSA C22.2 No. 14.

Reversing contactor refers to a contactor used to reverse the rotation direction of a motor. The LP5K0901BW3 is provided as a pre-assembled combination with a reversing power busbar, simplifying installation and commissioning. The mechanical interlock prevents simultaneous switching of both contactors, ensuring safe operation. Connections are made via screw terminals suitable for rigid cables from 1.5 to 4 mm² and flexible cables from 0.75 to 4 mm² without wire ends, and from 0.34 to 2.5 mm² with wire ends. The tightening torque is 0.8 to 1.3 Nm, and terminals are to be secured using a Phillips screwdriver No. 2 or flat screws with Ø 6 mm.

Functions and equipment in detail include built-in auxiliary contacts configured as 2 normally open (2NO). These are used for signal transmission in control circuits, for example, to indicate the switching status. The electrical life is 1.3 million switching cycles at 9 A AC-3, indicating high load capacity. The mechanical life is specified at 5 million switching cycles, highlighting the robustness of the device. The operating time is 10 to 20 ms for coil de-energization and NO opening, and 30 to 40 ms for coil energization and NO closing.

Technology explained simply shows that the contactor is designed for usage categories AC-1, AC-3, AC-3e, and AC-4. The rated breaking capacity is, for example, 110 A at 415 V and 70 A at 660–690 V, with values defined according to IEC 60947. The rated impulse voltage withstand is 8 kV, and the overvoltage category is III. The conventional thermal current (Ith) is 20 A for the power circuit and 10 A for the signal circuit at 50 °C. The average impedance is 3 MΩ at 20 A and 50 Hz for the power circuit.

Compatibility and accessories include use with various motor protection circuit breakers such as GV2LE14 or GV2ME14, as well as motor protection relays like LR2K0314 or LR2K0316. Additional auxiliary switches such as LA2KT2U (delayed 30 s) or LA2KT2E (time-delayed 1–30 s) are available. Nameplates such as LA9D90 and auxiliary switch blocks such as LA1KN20 (2 NO) or LA1KN02 (2 NO) can be used as supplements. Mounting is on DIN rail or directly on a panel, with screw fastening ensuring a secure and stable installation.

Mounting and installation is straightforward by securing to a DIN rail or mounting plate. The pre-assembled power busbar reduces installation time and minimizes error sources. The screw terminals allow for secure connections with various cable types. The mechanical interlock ensures that the contactors cannot be actuated simultaneously, guaranteeing safe operation.

Advantages in operation include high service life, compact design, and easy installation. The 24 V DC coil with low power consumption is ideal for integration into modern control systems. Certifications according to EN/IEC 60947-4-1, UL, CSA, CCC, EAC, and CE, as well as compliance with RoHS/REACH, ensure adherence to international standards. The device is designed for industrial applications where reliability and safety are critical.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/495484
qrcode für Schneider Electric LP5K0901BW3 Contactor 3p+1N 24VDC