Schneider Electric LP2K0901BD3, EAN: 3389110498318

Schneider Electric LP2K0901BD3 contactor 3-pole 24VDC with diode

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LP2K0901BD3 contactor 3-pole 24VDC with diode

Lieske Part No. 405962
Mfg Part No LP2K0901BD3
EAN-Code 3389110498318
Manufacturer Schneider Electric
Here only 144,46 EUR
171,91 EUR incl. VAT

Further information for Schneider Electric LP2K0901BD3 contactor 3-pole 24VDC with diode

Complementary
Coil technologyBuilt-in bidirectional peak limiting diode suppressor
Control circuit voltage limitsOperational: 0.8...1.15 Uc (at
Inrush power in W3 W (at 20 °C)
Hold-in power consumption in W3 W at 20 °C
Heat dissipation3 W
Auxiliary contacts typetype instantaneous 1 NC
Minimum switching current5 mA for signalling circuit
Minimum switching voltage17 V for signalling circuit
Non overlap distance0.5 mm
Insulation resistance> 10 MOhm for signalling circuit
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20 conforming to VDE 0106
Protective treatmentTC conforming to IEC 60068; TC conforming to DIN 50016
Ambient air temperature for operation-25…50 °C
Ambient air temperature for storage-50…80 °C
Operating altitude2000 m without derating
Flame retardanceV1 conforming to UL 94; Requirement 2 conforming to NF F 16-101; Requirement 2 conforming to NF F 16-102
Height58 mm
Width90 mm
Depth57 mm
Net weight0.48 kg
Logistical informations
Country of originFR
Main
RangeTeSys
Product nameTeSys K
Product or component typeReversing contactor
Device short nameLP2K
Device applicationControl
Contactor applicationMotor control; Resistive load
Utilisation categoryAC-3; AC-3e; AC-4; AC-1
Device presentationPreassembled with reversing power busbar
Poles description3P
power pole contact composition3 NO
[Ue] rated operational voltagePower circuit: 690 V AC 50/60 Hz; Signalling circuit:
[Ie] rated operational current9 A (at
Motor power kW2.2 kW at 220...230 V AC 50/60 Hz; 4 kW at 380...415 V AC 50/60 Hz; 4 kW at 440/690 V AC 50/60 Hz
Control circuit typeDC standard
[Uc] control circuit voltage24 V DC
Auxiliary contact composition1 NC
[Uimp] rated impulse withstand voltage8 kV
Overvoltage categoryIII
[Ith] conventional free air thermal current20 A (at 60 °C) for power circuit; 10 A (at 50 °C) for signalling circuit
Irms rated making capacity110 A AC for power circuit conforming to IEC 60947; 110 A AC for signalling circuit conforming to IEC 60947
Rated breaking capacity110 A at 220...230 V conforming to IEC 60947; 110 A at 380...400 V conforming to IEC 60947; 110 A at 415 V conforming to IEC 60947; 110 A at 440 V conforming to IEC 60947; 80 A at 500 V conforming to IEC 60947; 70 A at 660...690 V conforming to IEC 60947
[Icw] rated short-time withstand current90 A 50 °C - 1 s for power circuit; 85 A 50 °C - 5 s for power circuit; 80 A 50 °C - 10 s for power circuit; 60 A 50 °C - 30 s for power circuit; 45 A 50 °C - 1 min for power circuit; 40 A 50 °C - 3 min for power circuit; 20 A 50 °C - >= 15 min for power circuit; 80 A - 1 s for signalling circuit; 90 A - 500 ms for signalling circuit; 110 A - 100 ms for signalling circuit
Associated fuse rating25 A gG at
Average impedance3 mOhm - Ith 20 A 50 Hz for power circuit
[Ui] rated insulation voltagePower circuit: 600 V conforming to UL 508; Power circuit: 690 V conforming to IEC 60947-4-1; Signalling circuit: 690 V conforming to IEC 60947-4-1; Signalling circuit: 690 V conforming to IEC 60947-5-1; Signalling circuit: 600 V conforming to UL 508; Power circuit: 600 V conforming to CSA C22.2 No 14; Signalling circuit: 600 V conforming to CSA C22.2 No 14
Electrical durability1.3 Mcycles 9 A AC-3 at Ue
Interlocking typeMechanical
Mounting supportPlate; Rail
StandardsEN/IEC 60947-4-1; GB/T 14048.4; UL 60947-4-1; CSA C22.2 No 60947-4-1; JIS C8201-4-1
Product certificationsCB Scheme; CCC; UL; CSA; EAC; CE; UKCA
Connections - terminalsScrew clamp terminals 1 cable(s) 1.5…4 mm²solid; Screw clamp terminals 1 cable(s) 0.75…4 mm²flexible without cable end; Screw clamp terminals 1 cable(s) 0.34…2.5 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 1.5…4 mm²solid; Screw clamp terminals 2 cable(s) 0.75…4 mm²flexible without cable end; Screw clamp terminals 2 cable(s) 0.34…1.5 mm²flexible with cable end
Tightening torque0.8…1.3 N.m - on screw clamp terminals Philips No 2; 0.8…1.3 N.m - on screw clamp terminals flat Ø 6 mm; 0.8…1.3 N.m - on screw clamp terminals pozidriv No 2
Operating time30...40 ms coil energisation and NO closing; 10 ms coil de-energisation and NO opening
Safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
Mechanical durability5 Mcycles
Maximum operating rate3600 cyc/h
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height6.500 cm
Package 1 Width9.300 cm
Package 1 Length6.000 cm
Package 1 Weight454.000 g
Unit Type of Package 2S02
Number of Units in Package 220
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight9.330 kg
The reversing contactor LP2K0901BD3 from the TeSys K series by Schneider Electric is a 3-pole contactor for controlling electric drives and resistive loads. It is specifically designed for motor control applications and supports power ratings up to 4 kW at 380–415 V AC (category AC-3) as well as at 440–690 V AC. The rating is based on a service rated current of 9 A in the circuit, with the maximum motor power varying between 2.2 kW and 4 kW depending on the voltage range. Control is achieved via a 24 V DC coil, equipped with an integrated bidirectional peak-limiting diode suppressor to limit voltage spikes in the control circuit and extend the coil’s service life.

Applications include industrial motor control, particularly in systems requiring reversible rotation, such as conveyor belts, pumps, or machine tools. The device is approved for use categories AC-1, AC-3, AC-3e, and AC-4, enabling broad applicability across various load types. The integrated auxiliary contact arrangement with one normally open contact (1NO) allows direct integration into control circuits, for example, for status indication or feedback to a higher-level control system. The mechanical interlock ensures that the contactors cannot be energized simultaneously, which is essential for reversing operations to prevent short circuits.

Functions and features in detail include a pre-assembled reversing power busbar, simplifying installation and wiring. Connections are made via screw terminals, designed for cable cross-sections from 0.34 to 4 mm² (flexible or rigid), with tightening torques ranging from 0.8 to 1.3 Nm. The terminals are compatible with Phillips screwdrivers size 2, flat screws Ø 6 mm, and position 2. The rated operating voltage in the circuit is 690 V AC at 50/60 Hz, with insulation strength at 690 V according to IEC 60947-4-1. The rated impulse voltage withstand is 8 kV, and the overvoltage category is III, enabling use in industrial environments with high transient voltages.

Technology explained simply shows that the contactor is designed for high operational reliability. The electrical service life is 1.3 million switching cycles at 9 A and AC-3 operation, while the mechanical service life reaches 5 million cycles. The maximum operating rate is 3600 switching operations per hour, sufficient for high dynamics in control technology. Operating times are 30–40 ms for coil energization and NO closure, and 10 ms for coil de-energization and NO opening. The rated short-time current withstand is defined for various durations, with the current value at 50 °C and 1 second being 90 A. The rated breaking capacity is 110 A for voltage ranges up to 440 V and reduces to 70 A at 660–690 V, ensuring reliability during load interruption.

Compatibility and accessories include use with motor protection circuit breakers such as GV2ME14 or GV2LE14, as well as auxiliary switch blocks like LA1KN02, LA1KN22, or LA1KN31. These can be used to extend control functions, such as status feedback or interlocking. Certification according to EN/IEC 60947-4-1 and additional standards such as UL 60947-4-1, CSA C22.2 No. 60947-4-1, and JIS C8201-4-1 ensures international usability. Product certifications include CB Scheme, CCC, UL, CSA, EAC, CE, and UKCA. The device is also suitable for safety applications, as it features a certified S-type mirror contact meeting safety level B10d = 1,369,863 cycles at rated load according to EN/ISO 13849-1.

Mounting and installation are performed on DIN rails or directly on a panel. The compact design with a width of 90 mm, height of 58 mm, and depth of 57 mm allows dense mounting in enclosures. The mounting bracket is designed for both rail and panel mounting, offering flexibility during installation. The associated protection is 25 A gG, ensuring safety in fault conditions. The average impedance is 3 MΩ at a thermal current of 20 A and 50 Hz in the circuit.

Operational advantages include high reliability, long service life, and easy installation. The integrated diode in the coil reduces electromagnetic interference and extends the life of control components. Multi-standard certification enables use in various markets, and RoHS/REACH compliance ensures environmental compatibility. The contactor is designed for industrial environments where high mechanical and electrical stresses occur.

Key terms in the text: reversing contactor, TeSys K, 24 V DC coil, S-type mirror contact, DIN rail mounting, AC-3.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/405962
qrcode für Schneider Electric LP2K0901BD3 contactor 3-pole 24VDC with diode