Additional features
Coil technology	Without integrated switching module
Control circuit voltage limits	0.3 - 0.6 Uc (-40…70 °C): drop-out voltage AC 50/60 Hz; 0.8 - 1.1 Uc (-40…60 °C): operation AC 50 Hz; 0.85 - 1.1 Uc (-40…60 °C): operation AC 60 Hz; 1 - 1.1 Uc (60…70 °C): operation AC 50/60 Hz
Input power in VA	70 VA 60 Hz cos phi 0.75 (at 20 °C); 70 VA 50 Hz cos phi 0.75 (at 20 °C)
Hold power consumption in VA	7.5 VA 60 Hz cos phi 0.3 (at 20 °C); 7 VA 50 Hz cos phi 0.3 (at 20 °C)
Heat emission	2…3 W at 50/60 Hz
Type of auxiliary contacts	Mechanically linked type 1 S + 1 NC complies with IEC 60947-5-1; Mirror contact type 1 NO complies with IEC 60947-4-1
Signalling angular frequency	25 - 400 Hz
Min. switching current	5 mA for signal circuit
Min. switching voltage	17 V for signal circuit
Non-overlapping time	1.5 ms with switching between normally open and normally closed contact; 1.5 ms with actuation between normally open and normally closed contact
Insulation resistance	> 10 MΩ for signal circuits
Contractual warranty
Warranty (in months)	18
Main features
Product series	TeSys; TeSys Deca
Product name	TeSys Deca; TeSys Deca
Product or component type	Reversing safety
Device short name	LC2D
Application of contactor	Motor control; resistive load
Application category	AC-3; AC-1
Device representation	Pre-fabricated with reversing power busbar
Pole description	3P
Pole contact composition	3 S
[Ue] Rated operational voltage	Circuit:
[Ie] rated operational current	32 A (at
Motor power (kW)	7.5 kW at 220 - 230 V AC 50 Hz; 15 kW at 380 - 400 V AC 50 Hz; 15 kW at 415 - 440 V AC 50 Hz; 18.5 kW at 500 V AC 50 Hz; 18.5 kW at 660 - 690 V AC 50 Hz
Motor power HP (UL / CSA)	2 hp at 115 V AC 60 Hz for 1-phase motors; 5 hp at 230/240 V AC 60 Hz for 1-phase motors; 7.5 hp at 200/208 V AC 60 Hz for 3-phase motors; 10 hp at 230/240 V AC 60 Hz for 3-phase motors; 20 hp at 460/480 V AC 60 Hz for 3-phase motors; 30 hp at 575/600 V AC 60 Hz for 3-phase motors
Control circuit type	AC at 50/60 Hz
[Uc] control circuit voltage	120 V AC 50/60 Hz
Configuration of auxiliary contacts	1 S + 1 Ö
[Uimp] Rated impulse voltage withstand	6 kV corresponds to IEC 60947
Over voltage category	III
[Ith] conventional thermal current in free air	10 A (at 60 °C) for signal circuit; 50 A (at 60 °C) for power circuit
[Irms] Rated making capacity	140 A AC for signal circuits conforming to IEC 60947-5-1; 250 A DC for signal circuits conforming to IEC 60947-5-1; 550 A at 440 V for power circuits conforming to IEC 60947
Rated breaking capacity	550 A at 440 V for circuit, corresponds to IEC 60947
[Icw] rated short-time current withstand	60 A 40 °C - 10 min for circuit; 138 A 40 °C - 1 min for circuit; 260 A 40 °C - 10 s for circuit; 430 A 40 °C - 1 s for circuit; 100 A - 1 s for signal circuit; 120 A - 500 ms for signal circuit; 140 A - 100 ms for signal circuit
Associated fuse	10 A gG for signal circuit, compliant with IEC 60947-5-1; 63 A gG at
Average impedance	2 MOhm - Ith 50 A 50 Hz for circuit
[Ui] Rated insulation voltage	Circuit: 690 V compliant with IEC 60947-4-1; Circuit: 600 V CSA certified; Circuit: 600 V UL certified; Signal circuit: 690 V compliant with IEC 60947-1; Signal circuit: 600 V CSA certified; Signal circuit: 600 V UL certified
Electrical lifetime	1.65 Mcycles 32 A AC-3 at Ue
Power dissipation per pole	2 W AC-3; 5 W AC-1
Front cover	With
Locking type	Electrical and mechanical
Mounting bracket	Plate; rail
Standards	CSA C22.2 No. 14; EN 60947-4-1; EN 60947-5-1; IEC 60947-4-1; IEC 60947-5-1; UL 60335-2-40:Annex JJ; IEC 60335-1
Product certifications	UL; CSA; RINA; GOST; CCC; DNV; LROS (Lloyds register of shipping); GL; BV; UKCA; CB
Tightening moment	Control circuit: 1.7 Nm - on screw terminals - with flat screwdriver Ø 6; Control circuit: 1.7 Nm - on screw terminals - with Phillips screwdriver No. 2; Power circuit: 2.5 Nm - on screw terminals - with flat screwdriver Ø 6; Power circuit: 2.5 Nm - on screw terminals - with Phillips screwdriver No. 2; Control circuit: 1.7 Nm - on screw terminals - with screwdriver position No. 2; Power circuit: 2.5 Nm - on screw terminals - with screwdriver position No. 2
Operating time	12 - 22 ms closing; 4 - 19 ms opening
Security level rating	B10d = 1369863 cycles contactor with rated load corresponds to EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load corresponds to EN/ISO 13849-1
Mechanical life	15 Mcycles
Max. operating rate	3600 cyc/h 60 °C
Mounting
Degree of protection (IP)	IP20 front side corresponds to IEC 60529
Climate resistance	Complies with IACS E10; complies with IEC 60947-1 Annex Q Category D
Coating	TH corresponds to IEC 60068-2-30
Pollution degree	3
Operating ambient temperature	-40…60 °C; 60…70 °C with power reduction
Ambient temperature during storage	-60…80 °C
Operating altitude	0 - 3.000 m
Fire-resistance	850 °C corresponds to IEC 60695-2-1
Flame retardancy	V1 corresponds to UL 94
Mechanical robustness	Vibrations relay open: 2 Gn, 5 - 300 Hz; Vibrations relay closed: 4 Gn, 5 - 300 Hz; Shocks relay closed: 15 Gn for 11 ms; Shocks relay open: 8 Gn for 11 ms
Height	85 mm
Width	90 mm
Depth	92 mm
Product weight	0,797 kg
Packaging units
VPE 1 type	PCE
Number of devices per package	1
VPE 1 height	10,9 cm
VPE 1 width	11,4 cm
VPE 1 length	11,8 cm
Packaging weight (Lbs)	815,0 g

Standard contactors 0.06 -75 kW In addition to an attractive and functional design, the TeSys D contactors offer quick and easy installation with a narrow width of 45 or 55 mm. They meet international standards. The power sizes 40 to 65 A are equipped with EverLink terminals. These are patented and ensure a reliable and permanent connection.