Schneider Electric LC2D18G7, EAN: 3389110386417

Schneider Electric LC2D18G7 contactor 3p 1S1Ö

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LC2D18G7 contactor 3p 1S1Ö

Lieske Part No. 498570
Mfg Part No LC2D18G7
EAN-Code 3389110386417
Manufacturer Schneider Electric
Here only 205,67 EUR
244,75 EUR incl. VAT

Further information for Schneider Electric LC2D18G7 contactor 3p 1S1Ö

Additional features
Coil technologyWithout integrated switching module
Control circuit voltage limits0.3 - 0.6 Uc (-40…70 °C): drop-out voltage AC 50/60 Hz; 0.8 - 1.1 Uc (-40…60 °C): operation AC 50 Hz; 0.85 - 1.1 Uc (-40…60 °C): operation AC 60 Hz; 1 - 1.1 Uc (60…70 °C): operation AC 50/60 Hz
Input power in VA70 VA 60 Hz cos phi 0.75 (at 20 °C); 70 VA 50 Hz cos phi 0.75 (at 20 °C)
Hold power consumption in VA7.5 VA 60 Hz cos phi 0.3 (at 20 °C); 7 VA 50 Hz cos phi 0.3 (at 20 °C)
Heat emission2…3 W at 50/60 Hz
Type of auxiliary contactsMechanically linked type 1 S + 1 NC complies with IEC 60947-5-1; Mirror contact type 1 NO complies with IEC 60947-4-1
Signalling angular frequency25 - 400 Hz
Min. switching current5 mA for signal circuit
Min. switching voltage17 V for signal circuit
Non-overlapping time1.5 ms with switching between normally open and normally closed contact; 1.5 ms with actuation between normally open and normally closed contact
Insulation resistance> 10 MΩ for signal circuits
Contractual warranty
Warranty (in months)18
Main features
Product seriesTeSys; TeSys Deca
Product nameTeSys Deca; TeSys Deca
Product or component typeReversing safety
Device short nameLC2D
Application of contactorResistive load; motor control
Application categoryAC-3; AC-1
Device representationPre-fabricated with reversing power busbar
Pole description3P
Pole contact composition3 S
[Ue] Rated operational voltageCircuit:
[Ie] rated operational current18 A (at
Motor power (kW)4 kW at 220 - 230 V AC 50 Hz; 7.5 kW at 380 - 400 V AC 50 Hz; 9 kW at 415 - 440 V AC 50 Hz; 10 kW at 500 V AC 50 Hz; 10 kW at 660 - 690 V AC 50 Hz
Motor power HP (UL / CSA)1 hp at 115 V AC 60 Hz for 1-phase motors; 3 hp at 230/240 V AC 60 Hz for 1-phase motors; 5 hp at 200/208 V AC 60 Hz for 3-phase motors; 5 hp at 230/240 V AC 60 Hz for 3-phase motors; 10 hp at 460/480 V AC 60 Hz for 3-phase motors; 15 hp at 575/600 V AC 60 Hz for 3-phase motors
Control circuit typeAC at 50/60 Hz
[Uc] control circuit voltage120 V AC 50/60 Hz
Configuration of auxiliary contacts1 S + 1 Ö
[Uimp] Rated impulse voltage withstand6 kV corresponds to IEC 60947
Over voltage categoryIII
[Ith] conventional thermal current in free air10 A (at 60 °C) for signal circuit; 32 A (at 60 °C) for power circuit
[Irms] Rated making capacity140 A AC for signal circuit conforming to IEC 60947-5-1; 250 A DC for signal circuit conforming to IEC 60947-5-1; 300 A at 440 V for circuit conforming to IEC 60947
Rated breaking capacity300 A at 440 V for circuit, corresponds to IEC 60947
[Icw] rated short-time current withstand40 A 40 °C - 10 min for circuit; 84 A 40 °C - 1 min for circuit; 145 A 40 °C - 10 s for circuit; 240 A 40 °C - 1 s for circuit; 100 A - 1 s for signal circuit; 120 A - 500 ms for signal circuit; 140 A - 100 ms for signal circuit
Associated fuse10 A gG for signal circuits, complying with IEC 60947-5-1; 50 A gG at
Average impedance2.5 MOhm - Ith 32 A 50 Hz for circuit
[Ui] Rated insulation voltageCircuit: 690 V compliant with IEC 60947-4-1; Circuit: 600 V CSA certified; Circuit: 600 V UL certified; Signal circuit: 690 V compliant with IEC 60947-1; Signal circuit: 600 V CSA certified; Signal circuit: 600 V UL certified
Electrical lifetime1.65 Mcycles 18 A AC-3 at Ue
Power dissipation per pole0,8 W AC-3; 2,5 W AC-1
Front coverWith
Locking typeMechanical
Mounting bracketPlate; rail
StandardsCSA C22.2 No. 14; EN 60947-4-1; EN 60947-5-1; IEC 60947-4-1; IEC 60947-5-1; UL 60335-2-40:Annex JJ; IEC 60335-1
Product certificationsDNV; CSA; CCC; UL; GL; LROS (Lloyds register of shipping); BV; RINA; GOST; UKCA
Tightening momentCircuit: 1.7 Nm - on screw terminals - with flat screwdriver Ø 6; Circuit: 1.7 Nm - on screw terminals - with Phillips screwdriver No. 2; Control circuit: 1.7 Nm - on screw terminals - with flat screwdriver Ø 6; Control circuit: 1.7 Nm - on screw terminals - with Phillips screwdriver No. 2; Control circuit: 1.7 Nm - on screw terminals - with screwdriver position No. 2; Circuit: 2.5 Nm - on screw terminals - with screwdriver position No. 2
Operating time12 - 22 ms closing; 4 - 19 ms opening
Security level ratingB10d = 1369863 cycles contactor with rated load corresponds to EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load corresponds to EN/ISO 13849-1
Mechanical life15 Mcycles
Max. operating rate3600 cyc/h 60 °C
Mounting
Degree of protection (IP)IP20 front side corresponds to IEC 60529
Climate resistanceComplies with IACS E10; complies with IEC 60947-1 Annex Q Category D
CoatingTH corresponds to IEC 60068-2-30
Pollution degree3
Operating ambient temperature-40…60 °C; 60…70 °C with power reduction
Ambient temperature during storage-60…80 °C
Operating altitude0 - 3.000 m
Fire-resistance850 °C corresponds to IEC 60695-2-1
Flame retardancyV1 corresponds to UL 94
Mechanical robustnessVibrations contactor open: 2 Gn, 5 - 300 Hz; Vibrations contactor closed: 4 Gn, 5 - 300 Hz; Shocks contactor open: 10 Gn for 11 ms; Shocks contactor closed: 15 Gn for 11 ms
Height77 mm
Width90 mm
Depth86 mm
Product weight0,707 kg
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height9,400 cm
VPE 1 width11,400 cm
VPE 1 length14,000 cm
Packaging weight (Lbs)812,000 g
VPE 2 typeS02
VPE 2 quantity6
VPE 2 height15,000 cm
VPE 2 width30,000 cm
VPE 2 length40,000 cm
VPE 2 weight5,327 kg
VPE 3 typeP06
VPE 3 quantity96
VPE 3 height75,000 cm
VPE 3 width80,000 cm
VPE 3 length60,000 cm
VPE 3 weight93,732 kg
3-pole reversing contactor TeSys D for motor applications. Rated 18A AC-3 7.5kW@400V, includes a 120V 50/60Hz AC coil, 2NC+2NO auxiliary contacts, a mechanical interlock.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/498570
qrcode für Schneider Electric LC2D18G7 contactor 3p 1S1Ö