Schneider Electric LC2D12FE7, EAN: 3389110385755

Schneider Electric LC2D12FE7 contactor 3p 1S1Ö

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LC2D12FE7 contactor 3p 1S1Ö

Lieske Part No. 498889
Mfg Part No LC2D12FE7
EAN-Code 3389110385755
Manufacturer Schneider Electric
Here only 161,11 EUR
191,72 EUR incl. VAT

Further information for Schneider Electric LC2D12FE7 contactor 3p 1S1Ö

Complementary
Coil technologyWithout built-in suppressor module
Control circuit voltage limits0.3...0.6 Uc (-40…70 °C):drop-out AC 50/60 Hz; 0.8...1.1 Uc (-40…60 °C):operational AC 50 Hz; 0.85...1.1 Uc (-40…60 °C):operational AC 60 Hz; 1...1.1 Uc (60…70 °C):operational AC 50/60 Hz
Inrush power in VA70 VA 60 Hz cos phi 0.75 (at 20 °C); 70 VA 50 Hz cos phi 0.75 (at 20 °C)
Hold-in power consumption in VA7.5 VA 60 Hz cos phi 0.3 (at 20 °C); 7 VA 50 Hz cos phi 0.3 (at 20 °C)
Heat dissipation2…3 W at 50/60 Hz
Auxiliary contacts typetype mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1; type mirror contact 1 NC conforming to IEC 60947-4-1
Signalling circuit frequency25...400 Hz
Minimum switching current5 mA for signalling circuit
Minimum switching voltage17 V for signalling circuit
Non-overlap time1.5 ms on de-energisation between NC and NO contact; 1.5 ms on energisation between NC and NO contact
Insulation resistance> 10 MOhm for signalling circuit
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20 front face conforming to IEC 60529
Climatic withstandconforming to IACS E10; conforming to IEC 60947-1 Annex Q category D
Protective treatmentTH conforming to IEC 60068-2-30
Pollution degree3
Ambient air temperature for operation-40…60 °C; 60…70 °C with derating
Ambient air temperature for storage-60…80 °C
Operating altitude0...3000 m
Fire resistance850 °C conforming to IEC 60695-2-1
Flame retardanceV1 conforming to UL 94
Mechanical robustnessVibrations contactor open: 2 Gn, 5...300 Hz; Vibrations contactor closed: 4 Gn, 5...300 Hz; Shocks contactor open: 10 Gn for 11 ms; Shocks contactor closed: 15 Gn for 11 ms
Height77 mm
Width90 mm
Depth86 mm
Net weight0.697 kg
Logistical informations
Country of originFR
Main
RangeTeSys; TeSys Deca
Product nameTeSys D; TeSys Deca
Product or component typeReversing contactor
Device short nameLC2D
Contactor applicationResistive load; Motor control
Utilisation categoryAC-1; AC-3; AC-3e
Device presentationPreassembled with reversing power busbar
Poles description3P
power pole contact composition3 NO
[Ue] rated operational voltagePower circuit:
[Ie] rated operational current25 A (at
Motor power kW3 kW at 220...230 V AC 50 Hz; 5.5 kW at 380...400 V AC 50 Hz; 5.5 kW at 415 V AC 50 Hz; 5.5 kW at 440 V AC 50 Hz; 7.5 kW at 500 V AC 50 Hz; 7.5 kW at 660...690 V AC 50 Hz
Motor power hp1 hp at 115 V AC 60 Hz for 1 phase motors; 2 hp at 230/240 V AC 60 Hz for 1 phase motors; 3 hp at 200/208 V AC 60 Hz for 3 phases motors; 3 hp at 230/240 V AC 60 Hz for 3 phases motors; 7.5 hp at 460/480 V AC 60 Hz for 3 phases motors; 10 hp at 575/600 V AC 60 Hz for 3 phases motors
Control circuit typeAC at 50/60 Hz
[Uc] control circuit voltage115 V AC 50/60 Hz
Auxiliary contact composition1 NO + 1 NC
[Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947
Overvoltage categoryIII
[Ith] conventional free air thermal current10 A (at 60 °C) for signalling circuit; 25 A (at 60 °C) for power circuit
Irms rated making capacity250 A at 440 V for power circuit conforming to IEC 60947; 140 A AC for signalling circuit conforming to IEC 60947-5-1; 250 A DC for signalling circuit conforming to IEC 60947-5-1
Rated breaking capacity250 A at 440 V for power circuit conforming to IEC 60947
[Icw] rated short-time withstand current30 A 40 °C - 10 min for power circuit; 61 A 40 °C - 1 min for power circuit; 105 A 40 °C - 10 s for power circuit; 210 A 40 °C - 1 s for power circuit; 100 A - 1 s for signalling circuit; 120 A - 500 ms for signalling circuit; 140 A - 100 ms for signalling circuit
Associated fuse rating10 A gG for signalling circuit conforming to IEC 60947-5-1; 40 A gG at
Average impedance2.5 mOhm - Ith 25 A 50 Hz for power circuit
[Ui] rated insulation voltagePower circuit: 690 V conforming to IEC 60947-4-1; Power circuit: 600 V CSA certified; Power circuit: 600 V UL certified; Signalling circuit: 690 V conforming to IEC 60947-1; Signalling circuit: 600 V CSA certified; Signalling circuit: 600 V UL certified
Electrical durability2 Mcycles 12 A AC-3 at Ue
Power dissipation per pole1.56 W AC-1; 0.36 W AC-3; 0.36 W AC-3e
Front coverWith
Interlocking typeMechanical
Mounting supportPlate; Rail
StandardsCSA C22.2 No 14; EN 60947-4-1; EN 60947-5-1; IEC 60947-4-1; IEC 60947-5-1; UL 60335-2-40:Annex JJ; IEC 60335-1
Product certificationsDNV; CSA; CCC; UL; GL; LROS (Lloyds register of shipping); BV; RINA; GOST; UKCA
Operating time12...22 ms closing; 4...19 ms opening
Safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
Mechanical durability15 Mcycles
Maximum operating rate3600 cyc/h 60 °C
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height14.000 cm
Package 1 Width9.500 cm
Package 1 Length11.300 cm
Package 1 Weight808.000 g
Unit Type of Package 2S02
Number of Units in Package 26
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight5.211 kg
Unit Type of Package 3P06
Number of Units in Package 348
Package 3 Height45.000 cm
Package 3 Width60.000 cm
Package 3 Length80.000 cm
Package 3 Weight49.688 kg
The reversing contactor LC2D12FE7 from the TeSys Deca series by Schneider Electric is a pre-assembled contactor system for controlling electric motors and resistive loads. It is specifically designed for use in industrial applications where safe and reliable switching of motor loads is required. The device features a 3-pole main contact configuration (3P) and integrated auxiliary contacts in the configuration 1 S + 1 Ö, making it suitable for complex control tasks. The control circuit voltage is 115 V AC at 50/60 Hz, enabling its use in standard AC control systems.

Applications
This contactor is designed for motor control and operation with resistive loads. It covers usage categories AC-1, AC-3, and AC-3e, allowing application with various load types, including the control of three-phase motors. The motor power rating is up to 5.5 kW at 380–400 V AC 50 Hz and 7.5 kW at 660–690 V AC 50 Hz, with exact values varying depending on voltage and frequency. In the USA and Canada, it is certified for motors up to 10 hp at 575/600 V AC 60 Hz. The rated operating voltage for the circuit is defined according to standards, with the rated insulation voltage for the circuit being 690 V and for the signal circuit also 690 V as per IEC 60947-1. The overvoltage category III indicates suitability for industrial installations with high electrical stress.

Functions and Features in Detail
The device is configured as a reversing contactor combination, meaning it is pre-assembled with an integrated reversing power busbar. This enables quick and secure installation in applications requiring motor direction change. The auxiliary contacts (1 S + 1 Ö) are instantaneous and serve for signal transmission in control circuits. The front cover is integrated, providing enhanced safety and protection against accidental contact with the contacts. The interlocking type is mechanical, ensuring secure and reliable interlocking between contactors in reversing circuits.

Technical Details Explained
The rated making capacity is 250 A at 440 V for the circuit, demonstrating the contactor’s ability to safely interrupt high inrush currents during motor start. The rated breaking capacity is also specified as 250 A at 440 V, indicating the maximum current the device can safely interrupt. The rated short-time withstand current is defined for various durations, with the maximum value being 210 A for 1 second. The electrical life is 2 million switching cycles at 12 A AC-3, indicating high operational reliability and longevity. The power loss per pole is 0.36 W for categories AC-3 and AC-3e, indicating efficient heat dissipation and low energy losses. The operating time is 12–22 ms for closing and 4–19 ms for opening, ensuring fast response of the contactor.

Compatibility and Accessories
The contactor is designed for mounting on plate or rail, enabling flexible integration into existing control panels. It is equipped with EverLink terminals, ensuring reliable and durable connections. Compatible accessories include auxiliary switch blocks such as the LAD8N11 (1S+1Ö) or LADN22 (2S+2Ö), time blocks such as the LADT2, motor protection relays such as the LRD16, and protective covers such as the LAD9ET1S. These components can be used to extend functionality and enhance system safety. The associated fuse rating for the signal circuit is 10 A gG, representing the necessary protection for the control circuit.

Mounting and Installation
Mounting is done on a plate or rail, with the tightening torque for all screw terminals being 1.7 Nm. This applies to both the main circuit and control circuit and can be achieved using a flathead screwdriver (Ø 6 mm) or a Phillips screwdriver (No. 2). The narrow width of 45 or 55 mm allows for compact placement in enclosures. The front cover is already integrated, enhancing safety during installation and operation.

Operational Advantages
The contactor offers fast and easy installation thanks to its pre-assembled configuration and integrated front cover. The EverLink terminals ensure durable and reliable connections, increasing serviceability. The mechanical interlock ensures safe operation in reversing circuits. The high electrical life and low power loss contribute to system efficiency and longevity. Certifications according to IEC 60947-4-1, EN 60947-4-1, CSA C22.2 No. 14, UL 60335-2-40:Annex JJ, and other standards guarantee compliance with international safety and quality standards. The rated impulse withstand voltage of 6 kV and overvoltage category III make the device suitable for use in industrial environments with high electrical stress. The safety level rating (B10d = 1,369,863 cycles) demonstrates the contactor’s reliability under rated load conditions.

Standards and Certifications
The device complies with standards IEC 60947-4-1, EN 60947-4-1, CSA C22.2 No. 14, UL 60335-2-40:Annex JJ, IEC 60335-1 and is certified by DNV, CSA, CCC, UL, GL, LROS (Lloyds Register of Shipping), BV, RINA, GOST, UKCA. These certifications confirm suitability for use in various industries, including shipping and industrial automation.

Conclusion
The LC2D12FE7 is a robust, reliable, and efficient reversing contactor from the TeSys Deca series by Schneider Electric, designed for motor and resistive load control in industrial applications. It offers high electrical life, low power loss, fast operating times, and features mechanical interlocking and an integrated front cover. The pre-assembled configuration with reversing power busbar and EverLink terminals simplifies installation and enhances reliability. Compliance with international standards and certifications makes it suitable for use across various industries. Compatibility with various accessories extends system functionality and safety.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/498889
qrcode für Schneider Electric LC2D12FE7 contactor 3p 1S1Ö