Schneider Electric LC2D115FE7, EAN: 3389110960587

Schneider Electric LC2D115FE7 reversing contactor 115 A 115 V

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LC2D115FE7 reversing contactor 115 A 115 V

Lieske Part No. 1856378
Mfg Part No LC2D115FE7
EAN-Code 3389110960587
Manufacturer Schneider Electric
Here only 1.866,65 EUR
2.221,31 EUR incl. VAT

Further information for Schneider Electric LC2D115FE7 reversing contactor 115 A 115 V

Additional features
Coil technologyIntegrated bidirectional transient voltage suppressor diodes
Control circuit voltage limits0.3 - 0.5 Uc (55 °C): drop-out voltage AC 50/60 Hz; 0.8 - 1.15 Uc (55 °C): operation AC 50/60 Hz
Input power in VA280…350 VA 60 Hz cos phi 0.8 (at 20 °C); 280…350 VA 50 Hz cos phi 0.8 (at 20 °C)
Hold power consumption in VA2…18 VA (at 20 °C) cos phi 0.3 60 Hz; 2…18 VA (at 20 °C) cos phi 0.3 50 Hz
Heat emission3…8 W at 50/60 Hz
Type of auxiliary contactsMechanically linked type 1 S + 1 NC complies with IEC 60947-5-1; Mirror contact type 1 NO complies with IEC 60947-4-1
Signalling angular frequency25 - 400 Hz
Min. switching current5 mA for signal circuit
Min. switching voltage17 V for signal circuit
Non-overlapping time1.5 ms with switching between normally open and normally closed contact; 1.5 ms with actuation between normally open and normally closed contact
Insulation resistance> 10 MΩ for signal circuits
Contractual warranty
Warranty (in months)18
Main features
Product seriesTeSys
Product nameTeSys Deca
Product or component typeReversing safety
Device short nameLC2D
Application of contactorResistive load; motor control
Application categoryAC-3; AC-1; AC-3e
Device representationPre-fabricated with reversing power busbar
Pole description3P
Pole contact composition3 S
[Ue] Rated operational voltageCircuit:
[Ie] rated operational current200 A (at
Motor power (kW)30 kW at 220 - 230 V AC 50 - 60 Hz; 55 kW at 380 - 400 V AC 50 - 60 Hz; 59 kW at 415 V AC 50 - 60 Hz; 59 kW at 440 V AC 50 - 60 Hz; 75 kW at 500 V AC 50 - 60 Hz; 80 kW at 660 - 690 V AC 50 - 60 Hz; 65 kW at 1,000 V AC 50 - 60 Hz
Motor power HP (UL / CSA)30 hp at 200/208 V AC 60 Hz for 3-phase motors; 40 hp at 230/240 V AC 60 Hz for 3-phase motors; 75 hp at 460/480 V AC 60 Hz for 3-phase motors; 100 hp at 575/600 V AC 60 Hz for 3-phase motors
Control circuit typeAC at 50/60 Hz
[Uc] control circuit voltage115 V AC 50/60 Hz
Configuration of auxiliary contacts1 S + 1 Ö
[Uimp] Rated impulse voltage withstand8 kV corresponds to IEC 60947
Over voltage categoryIII
[Ith] conventional thermal current in free air200 A (at 60 °C) for circuit
[Irms] Rated making capacity140 A AC for signal circuits conforming to IEC 60947-5-1; 250 A DC for signal circuits conforming to IEC 60947-5-1; 1260 A at 440 V for power circuits conforming to IEC 60947
Rated breaking capacity1100 A at 440 V for circuit, corresponds to IEC 60947
[Icw] rated short-time current withstand250 A 40 °C - 10 min for circuit; 550 A 40 °C - 1 min for circuit; 950 A 40 °C - 10 s for circuit; 1100 A 40 °C - 1 s for circuit; 100 A - 1 s for signal circuit; 120 A - 500 ms for signal circuit; 140 A - 100 ms for signal circuit
Associated fuse10 A gG for signal circuit in accordance with IEC 60947-5-1; 250 A gG at
Average impedance0.6 MΩ - Ith 200 A 50 Hz for circuit
[Ui] Rated insulation voltageCircuit: 600 V CSA certified; Circuit: 600 V UL certified; Signal circuit: 690 V complies with IEC 60947-1; Signal circuit: 600 V CSA certified; Signal circuit: 600 V UL certified; Circuit: 1000 V complies with IEC 60947-4-1
Electrical lifetime0.8 Mcycles 200 A AC-1 at Ue
Power dissipation per pole24 W AC-1; 7,9 W AC-3; 7,9 W AC-3e
Front coverWith
Locking typeMechanical; Electrical
Mounting bracketPlate; rail
StandardsCSA C22.2 No. 14; EN 60947-4-1; EN 60947-5-1; IEC 60947-4-1; IEC 60947-5-1; UL 508
Product certificationsBV; CCC; CSA; DNV; GL; RINA; UL; EAC; UKCA
Tightening momentControl circuit: 1.2 Nm - on screw terminals - with flat screwdriver Ø 6; control circuit: 1.2 Nm - on screw terminals - with Phillips screwdriver No. 2; power circuit: 12 Nm - on hexagonal socket screws 4 mm; control circuit: 1.2 Nm - on screw terminals - with screwdriver position No. 2
Operating time20 - 50 ms closing; 6 - 20 ms opening
Security level ratingB10d = 1369863 cycles contactor with rated load corresponds to EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load corresponds to EN/ISO 13849-1
Mechanical life8 Mcycles
Max. operating rate2400 cyc/h 60 °C
Mounting
Degree of protection (IP)IP20 front side corresponds to IEC 60529
Climate resistancecomplies with IACS E10
CoatingTH corresponds to IEC 60068-2-30
Pollution degree3
Operating ambient temperature-40…60 °C; 60…70 °C with power reduction
Ambient temperature during storage-60…80 °C
Operating altitude0 - 3.000 m
Fire-resistance850 °C corresponds to IEC 60695-2-1
Flame retardancyV1 corresponds to UL 94
Mechanical robustnessVibrations relay open: 2 Gn, 5 - 300 Hz; Vibrations relay closed: 4 Gn, 5 - 300 Hz; Shocks relay closed: 15 Gn for 11 ms; Shocks relay open: 6 Gn for 11 ms
Height158 mm
Width266 mm
Depth148 mm
Product weight6,35 kg
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height23,000 cm
VPE 1 width31,500 cm
VPE 1 length37,000 cm
Packaging weight (Lbs)6,500 kg
VPE 2 typeP06
VPE 2 quantity8
VPE 2 height75,000 cm
VPE 2 width80,000 cm
VPE 2 length60,000 cm
VPE 2 weight60,000 kg
Standard contactors 0.06 -75 kW In addition to an attractive and functional design, the TeSys D contactors offer quick and easy installation with a narrow width of 45 or 55 mm. They meet international standards. The power sizes 40 to 65 A are equipped with EverLink terminals. These are patented and ensure a reliable and permanent connection.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1856378
qrcode für Schneider Electric LC2D115FE7 reversing contactor 115 A 115 V