Schneider Electric LC1DT25P7, EAN: 3389110244571

Schneider Electric LC1DT25P7 contactor 4p 25A 230VAC

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LC1DT25P7 contactor 4p 25A 230VAC

Lieske Part No. 629834
Mfg Part No LC1DT25P7
EAN-Code 3389110244571
Manufacturer Schneider Electric
Here only 66,99 EUR
79,72 EUR incl. VAT

Further information for Schneider Electric LC1DT25P7 contactor 4p 25A 230VAC

Complementary
Compatibility codeLC1D
Pole contact composition4 NO
Protective coverWith
[Ith] conventional free air thermal current10 A (at 60 °C) for signalling circuit; 25 A (at 60 °C) for power circuit
Irms rated making capacity140 A AC for signalling circuit conforming to IEC 60947-5-1; 250 A DC for signalling circuit conforming to IEC 60947-5-1; 250 A at 440 V for power circuit conforming to IEC 60947
Rated breaking capacity250 A at 440 V for power circuit conforming to IEC 60947
[Icw] rated short-time withstand current30 A 40 °C - 10 min for power circuit; 61 A 40 °C - 1 min for power circuit; 105 A 40 °C - 10 s for power circuit; 210 A 40 °C - 1 s for power circuit; 100 A - 1 s for signalling circuit; 120 A - 500 ms for signalling circuit; 140 A - 100 ms for signalling circuit
Associated fuse rating10 A gG for signalling circuit conforming to IEC 60947-5-1; 40 A gG at
Average impedance2.5 mOhm - Ith 25 A 50 Hz for power circuit
Power dissipation per pole1.56 W AC-1
[Ui] rated insulation voltagePower circuit: 600 V CSA certified; Power circuit: 600 V UL certified; Signalling circuit: 690 V conforming to IEC 60947-1; Signalling circuit: 600 V CSA certified; Signalling circuit: 600 V UL certified; Power circuit: 690 V conforming to IEC 60947-4-1
Overvoltage categoryIII
Pollution degree3
[Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947
Safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
Mechanical durability15 Mcycles
Electrical durability0.8 Mcycles 25 A AC-1 at Ue
Control circuit typeAC at 50/60 Hz
Coil technologyWithout built-in suppressor module
Control circuit voltage limits0.3...0.6 Uc (-40…70 °C):drop-out AC 50/60 Hz; 0.8...1.1 Uc (-40…60 °C):operational AC 50 Hz; 0.85...1.1 Uc (-40…60 °C):operational AC 60 Hz; 1...1.1 Uc (60…70 °C):operational AC 50/60 Hz
Inrush power in VA70 VA 60 Hz cos phi 0.75 (at 20 °C); 70 VA 50 Hz cos phi 0.75 (at 20 °C)
Hold-in power consumption in VA7.5 VA 60 Hz cos phi 0.3 (at 20 °C); 7 VA 50 Hz cos phi 0.3 (at 20 °C)
Heat dissipation2…3 W at 50/60 Hz
Operating time4...19 ms opening; 12...22 ms closing
Maximum operating rate3600 cyc/h at 60 °C
Auxiliary contact composition1 NO + 1 NC
Auxiliary contacts typetype mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1; type mirror contact 1 NC conforming to IEC 60947-4-1
Signalling circuit frequency25...400 Hz
Minimum switching voltage17 V for signalling circuit
Minimum switching current5 mA for signalling circuit
Insulation resistance> 10 MOhm for signalling circuit
Non-overlap time1.5 ms on de-energisation between NC and NO contact; 1.5 ms on energisation between NC and NO contact
Mounting supportPlate; Rail
Contractual warranty
Warranty (in months)18
Environment
StandardsCSA C22.2 No 14; EN 60947-4-1; EN 60947-5-1; IEC 60947-4-1; IEC 60947-5-1; UL 60947-4-1; IEC 60335-1
Product certificationsDNV; GL; CCC; LROS (Lloyds register of shipping); RINA; BV; GOST; UL; CSA; CB
IP degree of protectionIP20 front face conforming to IEC 60529
Protective treatmentTH conforming to IEC 60068-2-30
Climatic withstandconforming to IACS E10 exposure to damp heat; conforming to IEC 60947-1 Annex Q category D exposure to damp heat
Permissible ambient air temperature around the device-40…60 °C; 60…70 °C with derating
Operating altitude0...3000 m
Fire resistance850 °C conforming to IEC 60695-2-1
Flame retardanceV1 conforming to UL 94
Mechanical robustnessVibrations contactor open (2 Gn, 5...300 Hz) ; Vibrations contactor closed (4 Gn, 5...300 Hz) ; Shocks contactor closed (15 Gn for 11 ms) ; Shocks contactor open (10 Gn for 11 ms)
Height85 mm
Width45 mm
Depth92 mm
Net weight0.365 kg
Logistical informations
Country of originID
Main
RangeTeSys; TeSys Deca
Range of productTeSys Deca Advanced
Product or component typeContactor
Device short nameLC1D
Contactor applicationResistive load
Utilisation categoryAC-1
Poles description4P
[Ue] rated operational voltagePower circuit:
[Ie] rated operational current25 A (at
[Uc] control circuit voltage230 V AC 50/60 Hz
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.500 cm
Package 1 Width9.500 cm
Package 1 Length12.000 cm
Package 1 Weight392.000 g
Unit Type of Package 2S02
Number of Units in Package 216
Package 2 Height15 cm
Package 2 Width30 cm
Package 2 Length40 cm
Package 2 Weight6.696 kg
Unit Type of Package 3P06
Number of Units in Package 3256
Package 3 Height75.000 cm
Package 3 Width60.000 cm
Package 3 Length80.000 cm
Package 3 Weight118.064 kg
The LC1DT25P7 contactor from the TeSys Deca series by Schneider Electric is a 4-pole contactor with a rated operational current of 25 A and a control circuit voltage of 230 V AC at 50/60 Hz. It is designed for use with resistive loads and corresponds to usage category AC-1. The device features a contact configuration of 4 make contacts in the main current circuit and integrated auxiliary contacts in the configuration of 1 make + 1 break, which are mechanically linked to ensure secure signal transmission. The auxiliary contacts comply with standards IEC 60947-5-1 and IEC 60947-4-1, with the type specified as mirror contact for the signal circuit. The coil operates without an integrated control module, enabling simple installation and maintenance.

Applications
This contactor is designed for industrial applications, particularly in control systems requiring safe and reliable switching of power. The mechanically linked auxiliary contacts make it suitable for safety applications where monitoring the contactor’s status is required. Certifications according to UL, CSA, BV, CCC, LROS, DNV, RINA, GOST, and GL confirm its suitability for international operating conditions, including marine and heavy industrial environments.

Functions and Equipment in Detail
Current connections are made via Everlink and spring terminals, ensuring a secure and long-lasting connection. The tightening torque for screw terminals is 1.7 Nm, and both flathead screwdrivers (Ø 6) and Phillips screwdrivers (No. 2) can be used. The operating time is 4 to 19 ms for opening and 12 to 22 ms for closing. The maximum operating rate is 3600 switching cycles per hour at an ambient temperature of 60 °C. The heat dissipation is 2 to 3 W at 50/60 Hz.

Technology Explained Simply
The rated impulse voltage withstand is 6 kV, ensuring high electrical strength. The rated breaking capacity is 250 A at 440 V for the current circuit, demonstrating the contactor’s ability to interrupt high currents under defined conditions. The rated making capacity is 250 A for the current circuit at 440 V. The conventional thermal current (Ith) is 25 A for the current circuit at 60 °C.

Compatibility and Accessories
The contactor is compatible with various accessories, including auxiliary switch blocks such as LADN02, LADN22S, LAD8N02, LADN20, LADN13, LAD8N11, and timing blocks such as LADT0, LADT2, LAD-R4, LAD-S2. Additionally, motor protection circuit breakers such as GV2L22, GV2ME22, GV2P22, GV2LE22 and motor protection relays such as LRD22 are available. Interlocking elements such as LAD9V2 and interlock blocks such as LAD6K10M can be used to extend functionality. The control module LAD4RCU is available for other models in the LC1D series, but is not integrated in this model.

Mounting and Installation
Mounting is done via screw terminals with a tightening torque of 1.7 Nm. Dimensions are 45 mm (width) × 85 mm (height) × 92 mm (depth). The device features a safety cover that allows secure access to the contacts. The control circuit voltage limits are 0.3 to 0.6 Uc for drop-out voltage and 0.8 to 1.1 Uc for operation at 50 Hz, and 0.85 to 1.1 Uc at 60 Hz. At temperatures of 60 to 70 °C, the operating range is 1 to 1.1 Uc.

Operational Advantages
The contactor offers a high mechanical life of 15 million switching cycles and an electrical life of 0.8 million switching cycles at 25 A AC-1 and rated voltage. The power loss per pole is 1.56 W at AC-1. The pickup power is 70 VA at 50 Hz and 60 Hz, and the holding power consumption is 7 VA at 50 Hz and 7.5 VA at 60 Hz. The average impedance is 2.5 MΩ at Ith 25 A and 50 Hz for the current circuit. The associated fuse for the signal circuit is 10 A gG, and for the current circuit 40 A gG. The rated short-time current withstand is defined for various durations: 30 A for 10 minutes, 61 A for 1 minute, 105 A for 10 seconds, 210 A for 1 second in the current circuit; 100 A for 1 second, 120 A for 500 ms, 140 A for 100 ms in the signal circuit. The signal circuit frequency range is between 25 and 400 Hz, and the minimum switching voltage is 17 V for the signal circuit.

Safety Level and Standards Compliance
The contactor meets the requirements of standard EN/ISO 13849-1 with a safety level B10d of 1,369,863 cycles at rated load and 20,000,000 cycles at mechanical load. The overvoltage category III and pollution degree 3 ensure high reliability in dirty and electrically stressed environments. Certifications according to UL, CSA, BV, CCC, LROS, DNV, RINA, GOST, and GL confirm compliance with international standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/629834
qrcode für Schneider Electric LC1DT25P7 contactor 4p 25A 230VAC