Additional features
Compatibility code	LC1D
Pole contact composition	4 S
Safety cover	With
[Ith] conventional thermal current in free air	10 A (at 60 °C) for signal circuits; 20 A (at 60 °C) for power circuits
[Irms] Rated making capacity	140 A AC for Signalschaltkreis conforming to IEC 60947-5-1; 250 A DC for Signalschaltkreis conforming to IEC 60947-5-1; 250 A at 440 V for Stromkreis conforming to IEC 60947
Rated breaking capacity	250 A at 440 V for circuit, conforms to IEC 60947
[Icw] rated short-time current withstand	30 A 40 °C - 10 min for circuit; 61 A 40 °C - 1 min for circuit; 105 A 40 °C - 10 s for circuit; 210 A 40 °C - 1 s for circuit; 100 A - 1 s for signal circuit; 120 A - 500 ms for signal circuit; 140 A - 100 ms for signal circuit
Associated fuse	10 A gG for signal circuit according to IEC 60947-5-1; 25 A gG at
Average impedance	2.5 MOhm - Ith 20 A 50 Hz for circuit
Power dissipation per pole	1,56 W AC-1
[Ui] Rated insulation voltage	Circuit: 600 V CSA certified; Circuit: 600 V UL certified; Signal circuit: 690 V compliant with IEC 60947-1; Signal circuit: 600 V CSA certified; Signal circuit: 600 V UL certified; Circuit: 690 V compliant with IEC 60947-4-1
Over voltage category	III
Pollution degree	3
[Uimp] Rated impulse voltage withstand	6 kV corresponds to IEC 60947
Security level rating	B10d = 1369863 cycles contactor with rated load corresponds to EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load corresponds to EN/ISO 13849-1
Mechanical life	15 Mcycles
Control circuit type	AC at 50/60 Hz
Coil technology	Without integrated switching module
Control circuit voltage limits	0.3 - 0.6 Uc (-40…70 °C): drop-out voltage AC 50/60 Hz; 0.8 - 1.1 Uc (-40…60 °C): operation AC 50 Hz; 0.85 - 1.1 Uc (-40…60 °C): operation AC 60 Hz; 1 - 1.1 Uc (60…70 °C): operation AC 50/60 Hz
Input power in VA	70 VA 60 Hz cos phi 0.75 (at 20 °C); 70 VA 50 Hz cos phi 0.75 (at 20 °C)
Hold power consumption in VA	7.5 VA 60 Hz cos phi 0.3 (at 20 °C); 7 VA 50 Hz cos phi 0.3 (at 20 °C)
Heat emission	2…3 W at 50/60 Hz
Operating time	4 - 19 ms opening; 12 - 22 ms closing
Maximum operating rate	3600 cyc/h at 60 °C
Tightening moment	Control circuit: 1.7 Nm - on screw terminals - with flat screwdriver Ø 6; Control circuit: 1.7 Nm - on screw terminals - with Phillips screwdriver No. 2; Power circuit: 1.7 Nm - on screw terminals - with flat screwdriver Ø 6; Power circuit: 1.7 Nm - on screw terminals - with Phillips screwdriver No. 2; Control circuit: 1.7 Nm - on screw terminals - with screwdriver position No. 2; Power circuit: 1.7 Nm - on screw terminals - with screwdriver position No. 2
Configuration of auxiliary contacts	1 S + 1 Ö
Type of auxiliary contacts	Mechanically linked type 1 S + 1 NC complies with IEC 60947-5-1; Mirror contact type 1 NO complies with IEC 60947-4-1
Signalling angular frequency	25 - 400 Hz
Min. switching voltage	17 V for signal circuit
Min. switching current	5 mA for signal circuit
Insulation resistance	> 10 MΩ for signal circuits
Non-overlapping time	1.5 ms with switching between normally open and normally closed contact; 1.5 ms with actuation between normally open and normally closed contact
Mounting bracket	Plate; rail
Contractual warranty
Warranty (in months)	18
Main features
Product series	TeSys; TeSys Deca
Product or component type	Contactor
Device short name	LC1D
Application of contactor	resistive load
Application category	AC-1
Pole description	4P
[Ue] Rated operational voltage	Circuit:
[Ie] rated operational current	20 A (at
[Uc] control circuit voltage	120 V AC 50/60 Hz
Mounting
Standards	CSA C22.2 No. 14; EN 60947-4-1; EN 60947-5-1; IEC 60947-4-1; IEC 60947-5-1; UL 60947-4-1; IEC 60335-1
Product certifications	RINA; BV; GL; LROS (Lloyds register of shipping); DNV; GOST; UL; CSA; CCC
Degree of protection (IP)	IP20 front side corresponds to IEC 60529
Protection treatment	TH corresponds to IEC 60068-2-30
Climate resistance	Complies with IACS E10 damp heat exposure; complies with IEC 60947-1 Annex Q Category D damp heat exposure
Device ambient temperature	-40…60 °C; 60…70 °C with power reduction
Operating altitude	0 - 3.000 m
Fire-resistance	850 °C corresponds to IEC 60695-2-1
Flame retardancy	V1 corresponds to UL 94
Mechanical robustness	Vibrations contact open (2 Gn, 5 - 300 Hz); vibrations contact closed (4 Gn, 5 - 300 Hz); shocks contact closed (15 Gn for 11 ms); shocks contact open (10 Gn for 11 ms)
Height	85 mm
Width	45 mm
Depth	92 mm
Product weight	0,365 kg
Packaging units
VPE 1 type	PCE
Number of devices per package	1
VPE 1 height	5,5 cm
VPE 1 width	9,5 cm
VPE 1 length	11,2 cm
Packaging weight (Lbs)	389 g
VPE 2 type	S02
VPE 2 quantity	16
VPE 2 height	15 cm
VPE 2 width	30 cm
VPE 2 length	40 cm
VPE 2 weight	6,789 kg

TeSys LC1D power contactor. 4-pole, 4 NO contacts. Additional auxiliary contacts - 1 NO + 1 NC contact, coil 120 V AC. Dimensions (WxHxD) 45x85x92 mm, weight 0.365 kg. Category AC-1. Without integrated circuit module. Quick and easy setup. Safe and durable power connection with Everlink and spring terminals. Suitable for safety applications due to mechanically coupled contacts and mirror contacts. Certifications according to RINA, BV, GL, LROS (Lloyds register of shipping), DNV, GOST, UL, CSA, CCC. Product standards in accordance with.