Additional features
Motor power (kW)	18.5 kW at 220/230 V AC 50/60 Hz (AC-3); 37 kW at 380/400 V AC 50/60 Hz (AC-3); 37 kW at 415 V AC 50/60 Hz (AC-3); 37 kW at 440 V AC 50/60 Hz (AC-3); 37 kW at 500 V AC 50/60 Hz (AC-3); 37 kW at 660/690 V AC 50/60 Hz (AC-3)
Compatibility code	LC1D
Pole contact composition	3 S
Safety cover	With
[Ith] conventional thermal current in free air	10 A (at 60 °C) for signal circuit; 80 A (at 60 °C) for power circuit
[Irms] Rated making capacity	140 A AC for signal circuit conforming to IEC 60947-5-1; 250 A DC for signal circuit conforming to IEC 60947-5-1; 1000 A at 440 V AC for circuit conforming to IEC 60947
Rated breaking capacity	1000 A at 440 V for circuit, corresponds to IEC 60947
[Icw] rated short-time current withstand	520 A 40 °C - 10 s for circuit; 900 A 40 °C - 1 s for circuit; 110 A 40 °C - 10 min for circuit; 260 A 40 °C - 1 min for circuit; 100 A - 1 s for signal circuit; 120 A - 500 ms for signal circuit; 140 A - 100 ms for signal circuit
Associated fuse	10 A gG for signal circuit in accordance with IEC 60947-5-1; 125 A gG at
Average impedance	1.5 MOhm - Ith 80 A 50 Hz for circuit
Power dissipation per pole	9,6 W AC-1; 6,3 W AC-3; 6,3 W AC-3e
[Ui] Rated insulation voltage	Signal circuit: 690 V corresponds to IEC 60947-1; Power circuit: 690 V corresponds to IEC 60947-4-1
Over voltage category	III
Pollution degree	3
[Uimp] Rated impulse voltage withstand	6 kV corresponds to IEC 60947
Security level rating	B10d = 1369863 cycles contactor with rated load corresponds to EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load corresponds to EN/ISO 13849-1
Mechanical life	6 Mcycles
Electrical lifetime	0.7 Mcycles 80 A AC-1 at Ue
Control circuit type	AC at 50/60 Hz standard
Coil technology	Without integrated switching module
Control circuit voltage limits	0.3 - 0.6 Uc (-40…70 °C): drop-out voltage AC 50/60 Hz; 0.8 - 1.1 Uc (-40…60 °C): operation AC 50 Hz; 0.85 - 1.1 Uc (-40…60 °C): operation AC 60 Hz; 1 - 1.1 Uc (60…70 °C): operation AC 50/60 Hz
Input power in VA	140 VA 60 Hz cos phi 0.75 (at 20 °C); 160 VA 50 Hz cos phi 0.75 (at 20 °C)
Hold power consumption in VA	13 VA 60 Hz cos phi 0.3 (at 20 °C); 15 VA 50 Hz cos phi 0.3 (at 20 °C)
Heat emission	4…5 W at 50/60 Hz
Operating time	4 - 19 ms opening; 12 - 26 ms closing
Maximum operating rate	3600 cyc/h at 60 °C
Tightening moment	Power circuit: 8 Nm - on EverLink BTR screw-in connectors - cable 25…35 mm² hexagonal screw head 4 mm; Power circuit: 5 Nm - on EverLink BTR screw-in connectors - cable 1…25 mm² hexagonal screw head 4 mm; Control circuit: 1.7 Nm - on screw terminals - with screwdriver size No. 2; Power circuit: 2.5 Nm - on screw terminals - with screwdriver size No. 2
Configuration of auxiliary contacts	1 S + 1 Ö
Type of auxiliary contacts	Mechanically linked type 1 S + 1 NC complies with IEC 60947-5-1; Mirror contact type 1 NO complies with IEC 60947-4-1
Signalling angular frequency	25 - 400 Hz
Min. switching voltage	17 V for signal circuit
Min. switching current	5 mA for signal circuit
Insulation resistance	> 10 MΩ for signal circuits
Non-overlapping time	1.5 ms with switching between normally open and normally closed contact; 1.5 ms with actuation between normally open and normally closed contact
Mounting bracket	Plate; rail
Contractual warranty
Warranty (in months)	18
Main features
Product series	TeSys; TeSys Deca
Product or component type	Contactor
Device short name	LC1D
Application of contactor	Motor control; resistive load
Application category	AC-3; AC-3e; AC-1; AC-4
Pole description	3P
[Ue] Rated operational voltage	Circuit: 690 V AC 25 - 400 Hz; Circuit: 300 V DC
[Ie] rated operational current	80 A (at
[Uc] control circuit voltage	48 V AC 50/60 Hz
Mounting
Standards	EN 60947-4-1; EN 60947-5-1; IEC 60947-4-1; IEC 60947-5-1; CSA C22.2 No. 14; UL 60947-4-1; IEC 60335-2-40:Annex JJ; UL 60335-2-40:Annex JJ; IEC 60335-1:Clause 30.2
Product certifications	CCC; CSA; EAC; UL; KC; DNV-GL; LROS (Lloyds register of shipping)
Degree of protection (IP)	IP20 front side corresponds to IEC 60529
Protection treatment	TH corresponds to IEC 60068-2-30
Climate resistance	Complies with IACS E10 damp heat exposure; complies with IEC 60947-1 Annex Q Category D damp heat exposure
Device ambient temperature	-40…60 °C; 60…70 °C with power reduction
Operating altitude	0 - 3.000 m
Fire-resistance	850 °C corresponds to IEC 60695-2-1
Mechanical robustness	Vibrations contact open (2 Gn, 5 - 300 Hz); vibrations contact closed (4 Gn, 5 - 300 Hz); shocks contact closed (15 Gn for 11 ms); shocks contact open (10 Gn for 11 ms)
Height	122 mm
Width	55 mm
Depth	120 mm
Product weight	0,86 kg
Packaging units
VPE 1 type	PCE
Number of devices per package	1
VPE 1 height	6,2 cm
VPE 1 width	14 cm
VPE 1 length	15,5 cm
Packaging weight (Lbs)	850 g

TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO contact + 1 NC contact, rated operating power at AC-3, 400 V 37 kW, rated operating current Ie at AC-3, 400 V 80 A, coil 48 V AC. Dimensions (WxHxD) 55x122x120 mm, weight 0.86 kg. Category AC-3, AC-1. without integrated circuit module. Quick and easy setup. Safe and durable power connection with Everlink and spring terminals. Suitable for safety applications thanks to mechanically coupled contacts and mirror contacts. Certifications according to CCC, CSA, EAC, UL, KC, DNV-GL, LROS (Lloyds register of shipping). Product standards in accordance with.