| Complementary |
| Motor power kW | 5.5 kW at 220/230 V AC 50/60 Hz (AC-3); 11 kW at 380/400 V AC 50/60 Hz (AC-3); 11 kW at 415/440 V AC 50/60 Hz (AC-3); 15 kW at 500 V AC 50/60 Hz (AC-3); 15 kW at 660/690 V AC 50/60 Hz (AC-3); 5.5 kW at 220/230 V AC 50/60 Hz (AC-3e); 11 kW at 380/400 V AC 50/60 Hz (AC-3e); 11 kW at 415/440 V AC 50/60 Hz (AC-3e); 15 kW at 500 V AC 50/60 Hz (AC-3e); 15 kW at 660/690 V AC 50/60 Hz (AC-3e); 5.5 kW at 400 V AC 50/60 Hz (AC-4) |
| Motor power hp | 3 hp at 230/240 V AC 50/60 Hz for 1 phase motors; 2 hp at 115 V AC 50/60 Hz for 1 phase motors; 7.5 hp at 230/240 V AC 50/60 Hz for 3 phases motors; 15 hp at 460/480 V AC 50/60 Hz for 3 phases motors; 20 hp at 575/600 V AC 50/60 Hz for 3 phases motors; 7.5 hp at 200/208 V AC 50/60 Hz for 3 phases motors |
| Compatibility code | LC1D |
| Pole contact composition | 3 NO |
| Protective cover | With |
| [Ith] conventional free air thermal current | 10 A (at 60 °C) for signalling circuit; 40 A (at 60 °C) for power circuit |
| Irms rated making capacity | 140 A AC for signalling circuit conforming to IEC 60947-5-1; 250 A DC for signalling circuit conforming to IEC 60947-5-1; 450 A at 440 V for power circuit conforming to IEC 60947 |
| Rated breaking capacity | 450 A at 440 V for power circuit conforming to IEC 60947 |
| [Icw] rated short-time withstand current | 240 A 40 °C - 10 s for power circuit; 380 A 40 °C - 1 s for power circuit; 50 A 40 °C - 10 min for power circuit; 120 A 40 °C - 1 min for power circuit; 100 A - 1 s for signalling circuit; 120 A - 500 ms for signalling circuit; 140 A - 100 ms for signalling circuit |
| Associated fuse rating | 10 A gG for signalling circuit conforming to IEC 60947-5-1; 63 A gG at |
| Average impedance | 2 mOhm - Ith 40 A 50 Hz for power circuit |
| Power dissipation per pole | 3.2 W AC-1; 1.25 W AC-3; 1.25 W AC-3e |
| [Ui] rated insulation voltage | Power circuit: 690 V conforming to IEC 60947-4-1; Power circuit: 600 V CSA certified; Power circuit: 600 V UL certified; Signalling circuit: 690 V conforming to IEC 60947-1; Signalling circuit: 600 V CSA certified; Signalling circuit: 600 V UL certified |
| Overvoltage category | III |
| Pollution degree | 3 |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to IEC 60947 |
| Safety reliability level | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 |
| Mechanical durability | 15 Mcycles |
| Electrical durability | 1.65 Mcycles 25 A AC-3 at Ue |
| Control circuit type | AC at 50/60 Hz |
| Coil technology | Without built-in suppressor module |
| Control circuit voltage limits | 0.3...0.6 Uc (-40…70 °C):drop-out AC 50/60 Hz; 0.8...1.1 Uc (-40…60 °C):operational AC 50 Hz; 0.85...1.1 Uc (-40…60 °C):operational AC 60 Hz; 1...1.1 Uc (60…70 °C):operational AC 50/60 Hz |
| Inrush power in VA | 70 VA 60 Hz cos phi 0.75 (at 20 °C); 70 VA 50 Hz cos phi 0.75 (at 20 °C) |
| Hold-in power consumption in VA | 7.5 VA 60 Hz cos phi 0.3 (at 20 °C); 7 VA 50 Hz cos phi 0.3 (at 20 °C) |
| Heat dissipation | 2…3 W at 50/60 Hz |
| Operating time | 12...22 ms closing; 4...19 ms opening |
| Maximum operating rate | 3600 cyc/h at 60 °C |
| Connections - terminals | Control circuit: lugs-ring terminals - external diameter: 8 mm; Power circuit: lugs-ring terminals - external diameter: 10 mm |
| Auxiliary contact composition | 1 NO + 1 NC |
| Auxiliary contacts type | type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1; type mirror contact 1 NC conforming to IEC 60947-4-1 |
| Signalling circuit frequency | 25...400 Hz |
| Minimum switching voltage | 17 V for signalling circuit |
| Minimum switching current | 5 mA for signalling circuit |
| Insulation resistance | > 10 MOhm for signalling circuit |
| Non-overlap time | 1.5 ms on de-energisation between NC and NO contact; 1.5 ms on energisation between NC and NO contact |
| Mounting support | Rail; Plate |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | CSA C22.2 No 14; EN 60947-4-1; EN 60947-5-1; IEC 60947-4-1; IEC 60947-5-1; UL 60947-4-1; IEC 60335-1:Clause 30.2; IEC 60335-2-40:Annex JJ; UL 60335-2-40:Annex JJ; CSA C22.2 No 60947-4-1 |
| Product certifications | UL; CCC; CSA; Marine; UKCA; EAC; CB Scheme |
| IP degree of protection | IP20 front face conforming to IEC 60529 |
| Protective treatment | TH conforming to IEC 60068-2-30 |
| Climatic withstand | conforming to IACS E10 exposure to damp heat; conforming to IEC 60947-1 Annex Q category D exposure to damp heat |
| Permissible ambient air temperature around the device | -40…60 °C; 60…70 °C with derating |
| Operating altitude | 0...3000 m |
| Fire resistance | 850 °C conforming to IEC 60695-2-1 |
| Flame retardance | V1 conforming to UL 94 |
| Mechanical robustness | Vibrations contactor open (2 Gn, 5...300 Hz) ; Vibrations contactor closed (4 Gn, 5...300 Hz) ; Shocks contactor closed (15 Gn for 11 ms) ; Shocks contactor open (8 Gn for 11 ms) |
| Height | 85 mm |
| Width | 45 mm |
| Depth | 92 mm |
| Net weight | 0.37 kg |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | TeSys Deca Advanced |
| Product or component type | Contactor |
| Device short name | LC1D |
| Contactor application | Resistive load; Motor control |
| Utilisation category | AC-3; AC-3e; AC-1; AC-4 |
| Poles description | 3P |
| [Ue] rated operational voltage | Power circuit: |
| [Ie] rated operational current | 25 A (at |
| [Uc] control circuit voltage | 230 V AC 50/60 Hz |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 5.500 cm |
| Package 1 Width | 9.500 cm |
| Package 1 Length | 12.000 cm |
| Package 1 Weight | 432.000 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 16 |
| Package 2 Height | 15.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 7.405 kg |
The LC1D256P7 contactor from the TeSys Deca Advanced series by Schneider Electric is a 3-pole contactor with integrated auxiliary contacts (1 NO + 1 NC) for controlling electrical loads, particularly for motor drives and resistive loads. It is designed for use in industrial installations where reliable and safe switching performance is required. The control circuit voltage is 230 V AC at 50/60 Hz, making it suitable for use in standard networks with this voltage. The device complies with usage categories AC-3, AC-3e, AC-1, and AC-4, with category AC-3 being relevant for controlling three-phase motors under medium load.
Applications
The contactor is designed for motor control, with motor power varying depending on operating voltage. At 400 V AC and category AC-3, the rated operational power is 11 kW, corresponding to a rated operational current of 25 A. It is also available for other voltage ranges such as 220/230 V, 380/400 V, 415/440 V, 500 V, and 660/690 V, with motor power ranging between 5.5 kW and 15 kW depending on voltage. Category AC-3e allows use under special requirements for motor control, for example, with high inrush currents. Category AC-4 is intended for applications with frequent starts and stops, such as those found in crane systems or conveyor belts.
Functions and Features in Detail
The contactor features a safety cover that ensures mechanical interlocking of the contacts, supporting compliance with safety requirements in critical installations. The contacts are mechanically coupled and equipped with mirror contacts, ensuring high reliability in switching performance. Current connections are made via Everlink and spring terminals, enabling secure and long-lasting connections. The auxiliary contacts (1S+1Oe) are instantaneous and can be used for additional control functions such as signal transmission or feedback.
Technology Explained Simply
The contactor coil is rated for 230 V AC and operates at frequencies of 50/60 Hz. The operating voltage range is between 0.8 and 1.1 times the nominal voltage at temperatures from -40 to 60 °C, with the operating voltage allowed up to 1.1 times nominal voltage at higher temperatures (60–70 °C). The pickup power is 70 VA at 50/60 Hz, and the holding power consumption is 7 VA (50 Hz) or 7.5 VA (60 Hz). The heat dissipation of the device is 2 to 3 W at 50/60 Hz. The rated insulation voltage is 690 V for the current circuit and complies with standards IEC 60947-4-1 as well as UL and CSA. Overvoltage category III and pollution degree 3 indicate a robust construction suitable for use in polluted or industrial environments. The rated impulse voltage withstand is 6 kV.
Compatibility and Accessories
The contactor is compatible with various accessories that extend its functionality. These include auxiliary switch blocks such as LADN406 (4S instantaneous front-mounted) or LAD8N116 (1S+1Oe instantaneous side-mounted), enabling additional switching functions. Time modules such as LA4-DT2U (1.5–30 s) or LA4-DT4U (25–500 s) can be used for time-controlled switching operations. Other components such as the interface module LA4-DWB or the circuit module LAD4RCU (RC element) expand application possibilities. The device can also be combined with motor protection circuit breakers such as GV2LE22 to achieve integrated motor protection.
Mounting and Installation
Mounting is done via standard plug-in connection or screw fastening in enclosures. Dimensions are 45 mm (width) × 85 mm (height) × 92 mm (depth), allowing it to fit in standard control panels with DIN formats. Quick and easy setup is supported by Everlink and spring terminals, enabling secure connections without additional tools. The mechanical life is 15 million switching cycles, and the electrical life at 25 A AC-3 and nominal voltage is 1.65 million switching cycles.
Operational Advantages
The contactor offers high operational safety through mechanically coupled contacts and mirror contacts, ensuring reliable switching performance. The use of Everlink and spring terminals ensures a long-lasting and reliable current connection. Certifications according to BV, GOST, UL, CSA, RINA, CCC, DNV, LROS, and GL enable use in international markets and in installations with high safety requirements. The rated breaking capacity is 450 A at 440 V, ensuring safe interruption during short-circuit currents. The rated short-time current withstand is 240 A at 40 °C for 10 seconds, ensuring stability under transient loads.
Rated Insulation Voltage and Safety Standards
The rated insulation voltage is 690 V for the current circuit and complies with standards IEC 60947-4-1, IEC 60947-5-1, UL, and CSA. Overvoltage category III and pollution degree 3 indicate that the device is designed for industrial environments. The safety cover and mechanical interlocking of contacts meet the requirements of standard EN/ISO 13849-1, with safety level B10d being 1,369,863 cycles at rated load and 20,000,000 cycles at mechanical load. The power loss per pole is 3.2 W at AC-1 and 1.25 W at AC-3 and AC-3e.
Additional Technical Specifications
The conventional thermal current (Ith) is 40 A at 60 °C for the current circuit. The rated make capacity is 450 A at 440 V for the current circuit. The associated fuse rating is 63 A gG for the current circuit. The average impedance is 2 MΩ at Ith 40 A and 50 Hz. The operating time of the contactor is between 12 and 22 seconds.
Certifications and Standards
The device is certified according to BV, GOST, UL, CSA, RINA, CCC, DNV, LROS (Lloyds Register of Shipping), and GL. It complies with product standards according to IEC 60947-4-1, IEC 60947-5-1, UL, CSA, IEC 60947-1, EN/ISO 13849-1, and other relevant standards. The certifications enable use in various industries, including shipbuilding, power supply, and manufacturing.
Compatibility with Accessories
The contactor is compatible with a wide range of accessories that extend its functionality. These include auxiliary switch blocks such as LADN406, LAD8N116, LADN026, LADN046, LADN316, LADN226, LAD8N026, LADT46, LADT26, LADR26, as well as time modules such as LA4-DT2U and LA4-DT4U. Other components include the interface module LA4-DWB, the circuit module LAD4RCU, the interlocking block LAD6K10M, and the motor protection circuit breaker GV2LE22. These modules can be combined according to application requirements to achieve specific control and protection functions.
Safety and Reliability Features
The mechanical interlocking of contacts and the use of mirror contacts increase the reliability of the switching operation. The safety cover protects against unintended access and meets requirements for safety applications. The high mechanical life of 15 million cycles and the electrical life of 1.65 million cycles at 25 A AC-3 ensure long service life. The rated breaking capacity of 450 A at 440 V and the rated short-time current withstand of 240 A for 10 seconds ensure safe interruption under transient loads.
The device is designed for use in industrial installations where reliable and safe switching performance is required. The control circuit voltage is 230 V AC at 50/60 Hz, making it suitable for use in standard networks with this voltage. The device complies with usage categories AC-3, AC-3e, AC-1, and AC-4, with category AC-3 being relevant for controlling three-phase motors under medium load.
Applications
The contactor is designed for motor control, with motor power varying depending on operating voltage. At 400 V AC and category AC-3, the rated operational power is 11 kW, corresponding to a rated operational current of 25 A. It is also available for other voltage ranges such as 220/230 V, 380/400 V, 415/440 V, 500 V, and 660/690 V, with motor power ranging between 5.5 kW and 15 kW depending on voltage. Category AC-3e allows use under special requirements for motor control, for example, with high inrush currents. Category AC-4 is intended for applications with frequent starts and stops, such as those found in crane systems or conveyor belts.
Functions and Features in Detail
The contactor features a safety cover that ensures mechanical interlocking of the contacts, supporting compliance with safety requirements in critical installations. The contacts are mechanically coupled and equipped with mirror contacts, ensuring high reliability in switching performance. Current connections are made via Everlink and spring terminals, enabling secure and long-lasting connections. The auxiliary contacts (1S+1Oe) are instantaneous and can be used for additional control functions such as signal transmission or feedback.
Technology Explained Simply
The contactor coil is rated for 230 V AC and operates at frequencies of 50/60 Hz. The operating voltage range is between 0.8 and 1.1 times the nominal voltage at temperatures from -40 to 60 °C, with the operating voltage allowed up to 1.1 times nominal voltage at higher temperatures (60–70 °C). The pickup power is 70 VA at 50/60 Hz, and the holding power consumption is 7 VA (50 Hz) or 7.5 VA (60 Hz). The heat dissipation of the device is 2 to 3 W at 50/60 Hz. The rated insulation voltage is 690 V for the current circuit and complies with standards IEC 60947-4-1 as well as UL and CSA. Overvoltage category III and pollution degree 3 indicate a robust construction suitable for use in polluted or industrial environments. The rated impulse voltage withstand is 6 kV.
Compatibility and Accessories
The contactor is compatible with various accessories that extend its functionality. These include auxiliary switch blocks such as LADN406 (4S instantaneous front-mounted) or LAD8N116 (1S+1Oe instantaneous side-mounted), enabling additional switching functions. Time modules such as LA4-DT2U (1.5–30 s) or LA4-DT4U (25–500 s) can be used for time-controlled switching operations. Other components such as the interface module LA4-DWB or the circuit module LAD4RCU (RC element) expand application possibilities. The device can also be combined with motor protection circuit breakers such as GV2LE22 to achieve integrated motor protection.
Mounting and Installation
Mounting is done via standard plug-in connection or screw fastening in enclosures. Dimensions are 45 mm (width) × 85 mm (height) × 92 mm (depth), allowing it to fit in standard control panels with DIN formats. Quick and easy setup is supported by Everlink and spring terminals, enabling secure connections without additional tools. The mechanical life is 15 million switching cycles, and the electrical life at 25 A AC-3 and nominal voltage is 1.65 million switching cycles.
Operational Advantages
The contactor offers high operational safety through mechanically coupled contacts and mirror contacts, ensuring reliable switching performance. The use of Everlink and spring terminals ensures a long-lasting and reliable current connection. Certifications according to BV, GOST, UL, CSA, RINA, CCC, DNV, LROS, and GL enable use in international markets and in installations with high safety requirements. The rated breaking capacity is 450 A at 440 V, ensuring safe interruption during short-circuit currents. The rated short-time current withstand is 240 A at 40 °C for 10 seconds, ensuring stability under transient loads.
Rated Insulation Voltage and Safety Standards
The rated insulation voltage is 690 V for the current circuit and complies with standards IEC 60947-4-1, IEC 60947-5-1, UL, and CSA. Overvoltage category III and pollution degree 3 indicate that the device is designed for industrial environments. The safety cover and mechanical interlocking of contacts meet the requirements of standard EN/ISO 13849-1, with safety level B10d being 1,369,863 cycles at rated load and 20,000,000 cycles at mechanical load. The power loss per pole is 3.2 W at AC-1 and 1.25 W at AC-3 and AC-3e.
Additional Technical Specifications
The conventional thermal current (Ith) is 40 A at 60 °C for the current circuit. The rated make capacity is 450 A at 440 V for the current circuit. The associated fuse rating is 63 A gG for the current circuit. The average impedance is 2 MΩ at Ith 40 A and 50 Hz. The operating time of the contactor is between 12 and 22 seconds.
Certifications and Standards
The device is certified according to BV, GOST, UL, CSA, RINA, CCC, DNV, LROS (Lloyds Register of Shipping), and GL. It complies with product standards according to IEC 60947-4-1, IEC 60947-5-1, UL, CSA, IEC 60947-1, EN/ISO 13849-1, and other relevant standards. The certifications enable use in various industries, including shipbuilding, power supply, and manufacturing.
Compatibility with Accessories
The contactor is compatible with a wide range of accessories that extend its functionality. These include auxiliary switch blocks such as LADN406, LAD8N116, LADN026, LADN046, LADN316, LADN226, LAD8N026, LADT46, LADT26, LADR26, as well as time modules such as LA4-DT2U and LA4-DT4U. Other components include the interface module LA4-DWB, the circuit module LAD4RCU, the interlocking block LAD6K10M, and the motor protection circuit breaker GV2LE22. These modules can be combined according to application requirements to achieve specific control and protection functions.
Safety and Reliability Features
The mechanical interlocking of contacts and the use of mirror contacts increase the reliability of the switching operation. The safety cover protects against unintended access and meets requirements for safety applications. The high mechanical life of 15 million cycles and the electrical life of 1.65 million cycles at 25 A AC-3 ensure long service life. The rated breaking capacity of 450 A at 440 V and the rated short-time current withstand of 240 A for 10 seconds ensure safe interruption under transient loads.