Additional features
Motor power (kW)	3 kW at 220/230 V AC 50/60 Hz (AC-3); 5.5 kW at 380/400 V AC 50/60 Hz (AC-3); 5.5 kW at 415/440 V AC 50/60 Hz (AC-3); 7.5 kW at 500 V AC 50/60 Hz (AC-3); 7.5 kW at 660/690 V AC 50/60 Hz (AC-3); 3 kW at 220/230 V AC 50/60 Hz (AC-3e); 5.5 kW at 380/400 V AC 50/60 Hz (AC-3e); 5.5 kW at 415/440 V AC 50/60 Hz (AC-3e); 7.5 kW at 500 V AC 50/60 Hz (AC-3e); 7.5 kW at 660/690 V AC 50/60 Hz (AC-3e); 3.7 kW at 400 V AC 50/60 Hz (AC-4)
Motor power HP (UL / CSA standards)	0.5 hp at 115 V AC 50/60 Hz for 1-phase motors; 2 hp at 230/240 V AC 50/60 Hz for 1-phase motors; 3 hp at 200/208 V AC 50/60 Hz for 3-phase motors; 3 hp at 230/240 V AC 50/60 Hz for 3-phase motors; 7.5 hp at 460/480 V AC 50/60 Hz for 3-phase motors; 10 hp at 575/600 V AC 50/60 Hz for 3-phase motors
Compatibility code	LC1D
Pole contact composition	3 S
Safety cover	With
[Ith] conventional thermal current in free air	25 A (at 60 °C) for power circuit; 10 A (at 60 °C) for signal circuit
[Irms] Rated making capacity	250 A at 440 V for circuits conforming to IEC 60947; 140 A AC for signal circuits conforming to IEC 60947-5-1; 250 A DC for signal circuits conforming to IEC 60947-5-1
Rated breaking capacity	250 A at 440 V for circuit, conforms to IEC 60947
[Icw] rated short-time current withstand	105 A 40 °C - 10 s for circuit; 210 A 40 °C - 1 s for circuit; 30 A 40 °C - 10 min for circuit; 61 A 40 °C - 1 min for circuit; 100 A - 1 s for signal circuit; 120 A - 500 ms for signal circuit; 140 A - 100 ms for signal circuit
Associated fuse	10 A gG for signal circuits, complies with IEC 60947-5-1; 40 A gG at
Average impedance	2.5 MOhm - Ith 25 A 50 Hz for circuit
Power dissipation per pole	0,36 W AC-3; 1,56 W AC-1; 0,36 W AC-3e
[Ui] Rated insulation voltage	Circuit: 690 V compliant with IEC 60947-4-1; Circuit: 600 V CSA certified; Circuit: 600 V UL certified; Signal circuit: 690 V compliant with IEC 60947-1; Signal circuit: 600 V CSA certified; Signal circuit: 600 V UL certified
Over voltage category	III
Pollution degree	3
[Uimp] Rated impulse voltage withstand	6 kV corresponds to IEC 60947
Security level rating	B10d = 1369863 cycles contactor with rated load corresponds to EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load corresponds to EN/ISO 13849-1
Mechanical life	30 Mcycles
Electrical lifetime	2 Mcycles 12 A AC-3 at Ue
Control circuit type	DC Standard
Coil technology	With integrated suppression unit
Control circuit voltage limits	0.1 - 0.25 Uc (-40…70 °C): drop voltage DC; 0.7 - 1.25 Uc (-40…60 °C): operation DC; 1 - 1.25 Uc (60…70 °C): operation DC
Absorption power in W	5.4 W (at 20 °C)
Holding power consumption in W	5.4 W at 20 °C
Operating time	63 ±15 % ms closing; 20 ±20 % ms opening
Time constant	28 ms
Maximum operating rate	3600 cyc/h at 60 °C
Connections - terminals	Control circuit: ring terminal lugs - outer diameter: 8 mm; power circuit: ring terminal lugs - outer diameter: 8 mm
Configuration of auxiliary contacts	1 S + 1 Ö
Type of auxiliary contacts	Mechanically linked type 1 S + 1 NC complies with IEC 60947-5-1; Mirror contact type 1 NO complies with IEC 60947-4-1
Signalling angular frequency	25 - 400 Hz
Min. switching voltage	17 V for signal circuit
Min. switching current	5 mA for signal circuit
Insulation resistance	> 10 MΩ for signal circuits
Non-overlapping time	1.5 ms with switching between normally open and normally closed contact; 1.5 ms with actuation between normally open and normally closed contact
Mounting bracket	Rail; Plate
Contractual warranty
Warranty (in months)	18
Main features
Product series	TeSys Deca Advanced
Product or component type	Contactor
Device short name	LC1D
Application of contactor	Resistive load; motor control
Application category	AC-3; AC-3e; AC-1; AC-4
Pole description	3P
[Ue] Rated operational voltage	Circuit:
[Ie] rated operational current	25 A (at
[Uc] control circuit voltage	48 V DC
Mounting
Standards	CSA C22.2 No. 14; EN 60947-4-1; EN 60947-5-1; IEC 60947-4-1; IEC 60947-5-1; UL 60947-4-1; IEC 60335-1:Clause 30.2; IEC 60335-2-40:Annex JJ; UL 60335-2-40:Annex JJ; CSA C22.2 No. 60947-4-1
Product certifications	UL; CCC; CSA; Marine; UKCA; EAC; CB-Regulation
Degree of protection (IP)	IP20 front side corresponds to IEC 60529
Protection treatment	TH corresponds to IEC 60068-2-30
Climate resistance	Complies with IACS E10 damp heat exposure; complies with IEC 60947-1 Annex Q Category D damp heat exposure
Device ambient temperature	-40…60 °C; 60…70 °C with power reduction
Operating altitude	0 - 3.000 m
Fire-resistance	850 °C corresponds to IEC 60695-2-1
Flame retardancy	V1 corresponds to UL 94
Mechanical robustness	Vibrations contactor open (2 Gn, 5 - 300 Hz); vibrations contactor closed (4 Gn, 5 - 300 Hz); shocks contactor open (10 Gn for 11 ms); shocks contactor closed (15 Gn for 11 ms)
Height	77 mm
Width	45 mm
Depth	95 mm
Product weight	0,485 kg
Packaging units
VPE 1 type	PCE
Number of devices per package	1
VPE 1 height	10,3 cm
VPE 1 width	8,1 cm
VPE 1 length	5,4 cm
Packaging weight (Lbs)	501,0 g

TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO + 1 NC contact, rated operating power at AC-3, 400 V 5.5 kW, rated operating current Ie at AC-3, 400 V 12 A, coil 48 V DC. Dimensions (WxHxD) 45x77x95 mm, weight 0.485 kg. Category AC-4, AC-3, AC-1. with integral suppression unit. Quick and easy setup. Safe and durable power connection with Everlink and spring terminals. Suitable for safety applications due to mechanically coupled contacts and mirror contacts. Certifications according to GL, CSA, CCC, LROS (Lloyds register of shipping), BV, RINA, UL, GOST, DNV. Product standards in accordance with.