Schneider Electric LC1D115M5, EAN: 3389110377156

Schneider Electric LC1D115M5 contactor 3p 115 A

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LC1D115M5 contactor 3p 115 A

Lieske Part No. 1232735
Mfg Part No LC1D115M5
EAN-Code 3389110377156
Manufacturer Schneider Electric
Here only 687,51 EUR
818,14 EUR incl. VAT

Further information for Schneider Electric LC1D115M5 contactor 3p 115 A

Additional features
Motor power HP (UL / CSA standards)30 hp at 200/208 V AC 50/60 Hz for 3-phase motors; 40 hp at 230/240 V AC 50/60 Hz for 3-phase motors; 75 hp at 460/480 V AC 50/60 Hz for 3-phase motors; 100 hp at 575/600 V AC 50/60 Hz for 3-phase motors
Compatibility codeLC1D
Pole contact composition3 S
Safety coverWith
[Ith] conventional thermal current in free air200 A (at 60 °C) for circuit
[Irms] Rated making capacity1260 A at 440 V for circuit conforming to IEC 60947; 140 A AC for signal circuit conforming to IEC 60947-5-1; 250 A DC for signal circuit conforming to IEC 60947-5-1
Rated breaking capacity1100 A at 440 V for circuit, corresponds to IEC 60947
[Icw] rated short-time current withstand250 A 40 °C - 10 min for circuit; 550 A 40 °C - 1 min for circuit; 950 A 40 °C - 10 s for circuit; 1100 A 40 °C - 1 s for circuit; 100 A - 1 s for signal circuit; 120 A - 500 ms for signal circuit; 140 A - 100 ms for signal circuit
Associated fuse250 A gG at
Average impedance0.6 MΩ - Ith 200 A 50 Hz for circuit
Power dissipation per pole24 W AC-1; 7,9 W AC-3; 7,9 W AC-3e
[Ui] Rated insulation voltageCircuit: 600 V CSA certified; Circuit: 600 V UL certified; Circuit: 1000 V complies with IEC 60947-4-1; Signal circuit: 690 V complies with IEC 60947-1; Signal circuit: 600 V CSA certified; Signal circuit: 600 V UL certified
Over voltage categoryIII
Pollution degree3
[Uimp] Rated impulse voltage withstand8 kV corresponds to IEC 60947
Security level ratingB10d = 684932 cycles contactor with rated load corresponds to EN/ISO 13849-1; B10d = 10000000 cycles contactor with mechanical load corresponds to EN/ISO 13849-1
Mechanical life8 Mcycles
Electrical lifetime0.8 Mcycles 200 A AC-1 at Ue
Control circuit typeAC at 50 Hz
Coil technologyWithout integrated switching module
Control circuit voltage limits0.3 - 0.6 Uc (-40…70 °C): drop-out voltage AC 50 Hz; 0.85 - 1.1 Uc (-40…55 °C): operation AC 50 Hz; 1 - 1.1 Uc (55…70 °C): operation AC 50 Hz
Input power in VA300 VA 50 Hz cos phi 0.8 (at 20 °C)
Hold power consumption in VA22 VA 50 Hz cos phi 0.3 (at 20 °C)
Heat emission3…8 W at 50 Hz
Operating time6 - 20 ms opening; 20 - 50 ms closing
Maximum operating rate2400 cyc/h at 60 °C
Tightening momentControl circuit: 1.2 Nm - on screw terminals - with flat screwdriver Ø 6; control circuit: 1.2 Nm - on screw terminals - with Phillips screwdriver No. 2; power circuit: 12 Nm - on hexagonal socket screws 4 mm; control circuit: 1.2 Nm - on screw terminals - with screwdriver position No. 2
Configuration of auxiliary contacts1 S + 1 Ö
Type of auxiliary contactsMechanically linked type 1 S + 1 NC complies with IEC 60947-5-1; Mirror contact type 1 NO complies with IEC 60947-4-1
Signalling angular frequency25 - 400 Hz
Min. switching voltage17 V for signal circuit
Min. switching current5 mA for signal circuit
Insulation resistance> 10 MΩ for signal circuits
Non-overlapping time1.5 ms with switching between normally open and normally closed contact; 1.5 ms with actuation between normally open and normally closed contact
Mounting bracketRail; Plate
Contractual warranty
Warranty (in months)18
Main features
Product seriesTeSys
Product or component typeContactor
Device short nameLC1D
Application of contactorMotor control; resistive load
Application categoryAC-3; AC-3e; AC-1; AC-4
Pole description3P
[Ue] Rated operational voltageCircuit:
[Ie] rated operational current200 A (at
[Uc] control circuit voltage220 V AC 50 Hz
Mounting
StandardsCSA C22.2 No. 14; EN 60947-4-1; IEC 60947-4-1; IEC 60335-1:Clause 30.2; IEC 60335-2-40:Annex JJ; UL 60335-2-40:Annex JJ; UL 60947-4-1; CSA C22.2 No. 60947-4-1; JIS C8201-4-1
Product certificationsUL; CSA; CCC; UKCA; CE; EAC; Marine
Degree of protection (IP)IP20 front side corresponds to IEC 60529
Protection treatmentTH corresponds to IEC 60068-2-30
Climate resistanceComplies with IACS E10 damp heat exposure; complies with IEC 60947-1 Annex Q Category D damp heat exposure
Device ambient temperature-40…60 °C; 60…70 °C with power reduction
Operating altitude0 - 3.000 m
Fire-resistance850 °C corresponds to IEC 60695-2-1
Flame retardancyV1 corresponds to UL 94
Mechanical robustnessVibrations contactor open (2 Gn, 5 - 300 Hz); Vibrations contactor closed (4 Gn, 5 - 300 Hz); Shocks contactor closed (15 Gn for 11 ms); Shocks contactor open (6 Gn for 11 ms)
Height158 mm
Width120 mm
Depth136 mm
Product weight2,5 kg
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height17,500 cm
VPE 1 width19,000 cm
VPE 1 length21,000 cm
Packaging weight (Lbs)2,420 kg
VPE 2 typeP06
VPE 2 quantity27
VPE 2 height74,000 cm
VPE 2 width60,000 cm
VPE 2 length80,000 cm
VPE 2 weight78,583 kg
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO + 1 NC contact, rated operating power at AC-3, 400 V 55 kW, rated operating current Ie at AC-3, 400 V 115 A, coil 220 V AC. Dimensions (WxHxD) 120x158x136 mm, weight 2.5 kg. Category AC-3, AC-4, AC-1. Without integrated circuit module. Quick and easy setup. Safe and durable power connection with Everlink and spring terminals. Suitable for safety applications due to mechanically coupled contacts and mirror contacts. Certifications according to GOST, RINA, DNV, CSA, LROS (Lloyds register of shipping), BV, UL, GL, CCC. Product standards in accordance with.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1232735
qrcode für Schneider Electric LC1D115M5 contactor 3p 115 A