Schneider Electric LC1D098F7, EAN: 3389110275322

Schneider Electric LC1D098F7 contactor 2S+2Ö 20A

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LC1D098F7 contactor 2S+2Ö 20A

Lieske Part No. 585532
Mfg Part No LC1D098F7
EAN-Code 3389110275322
Manufacturer Schneider Electric
Here only 67,97 EUR
80,88 EUR incl. VAT

Further information for Schneider Electric LC1D098F7 contactor 2S+2Ö 20A

Complementary
Compatibility codeLC1D
Pole contact composition2 NO + 2 NC
Protective coverWith
[Ith] conventional free air thermal current20 A (at 60 °C) for power circuit; 10 A (at 60 °C) for signalling circuit
Irms rated making capacity250 A at 440 V for power circuit conforming to IEC 60947; 140 A AC for signalling circuit conforming to IEC 60947-5-1; 250 A DC for signalling circuit conforming to IEC 60947-5-1
Rated breaking capacity250 A at 440 V for power circuit conforming to IEC 60947
[Icw] rated short-time withstand current105 A 40 °C - 10 s for power circuit; 210 A 40 °C - 1 s for power circuit; 30 A 40 °C - 10 min for power circuit; 61 A 40 °C - 1 min for power circuit; 100 A - 1 s for signalling circuit; 120 A - 500 ms for signalling circuit; 140 A - 100 ms for signalling circuit
Associated fuse rating10 A gG for signalling circuit conforming to IEC 60947-5-1; 25 A gG at
Average impedance2.5 mOhm - Ith 25 A 50 Hz for power circuit
Power dissipation per pole1.56 W AC-1
[Ui] rated insulation voltagePower circuit: 690 V conforming to IEC 60947-4-1; Power circuit: 600 V CSA certified; Power circuit: 600 V UL certified; Signalling circuit: 690 V conforming to IEC 60947-1; Signalling circuit: 600 V CSA certified; Signalling circuit: 600 V UL certified
Overvoltage categoryIII
Pollution degree3
[Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947
Safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
Mechanical durability15 Mcycles
Electrical durability0.3 Mcycles 20 A AC-1 at Ue
Control circuit typeAC at 50/60 Hz
Coil technologyWithout built-in suppressor module
Control circuit voltage limits0.3...0.6 Uc (-40…60 °C):drop-out AC 50/60 Hz; 0.8...1.1 Uc (-40…60 °C):operational AC 50 Hz; 0.85...1.1 Uc (-40…60 °C):operational AC 60 Hz
Inrush power in VA70 VA 60 Hz cos phi 0.75 (at 20 °C); 70 VA 50 Hz cos phi 0.75 (at 20 °C)
Hold-in power consumption in VA7.5 VA 60 Hz cos phi 0.3 (at 20 °C); 7 VA 50 Hz cos phi 0.3 (at 20 °C)
Heat dissipation2…3 W at 50/60 Hz
Operating time12...22 ms closing; 4...19 ms opening
Maximum operating rate3600 cyc/h at 60 °C
Auxiliary contact composition1 NO + 1 NC
Auxiliary contacts typetype mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1; type mirror contact 1 NC conforming to IEC 60947-4-1
Signalling circuit frequency25...400 Hz
Minimum switching voltage17 V for signalling circuit
Minimum switching current5 mA for signalling circuit
Insulation resistance> 10 MOhm for signalling circuit
Non-overlap time1.5 ms on de-energisation between NC and NO contact; 1.5 ms on energisation between NC and NO contact
Mounting supportRail; Plate
Contractual warranty
Warranty (in months)18
Environment
StandardsCSA C22.2 No 14; EN 60947-4-1; EN 60947-5-1; IEC 60947-4-1; IEC 60947-5-1; UL 60947-4-1; IEC 60335-1:Clause 30.2; IEC 60335-2-40:Annex JJ; UL 60335-2-40:Annex JJ; CSA C22.2 No 60947-4-1
Product certificationsUL; CCC; CSA; Marine; UKCA; EAC; CB Scheme
IP degree of protectionIP20 front face conforming to IEC 60529
Protective treatmentTH conforming to IEC 60068-2-30
Climatic withstandconforming to IACS E10 exposure to damp heat; conforming to IEC 60947-1 Annex Q category D exposure to damp heat
Permissible ambient air temperature around the device-40…60 °C; 60…70 °C with derating
Operating altitude0...3000 m
Fire resistance850 °C conforming to IEC 60695-2-1
Flame retardanceV1 conforming to UL 94
Mechanical robustnessVibrations contactor open (2 Gn, 5...300 Hz) ; Vibrations contactor closed (4 Gn, 5...300 Hz) ; Shocks contactor open (10 Gn for 11 ms) ; Shocks contactor closed (15 Gn for 11 ms)
Height85 mm
Width45 mm
Depth92 mm
Net weight0.365 kg
Logistical informations
Country of originID
Main
Range of productTeSys Deca Advanced
Product or component typeContactor
Device short nameLC1D
Contactor applicationResistive load
Utilisation categoryAC-1
Poles description4P
[Ue] rated operational voltagePower circuit:
[Ie] rated operational current20 A (at
[Uc] control circuit voltage110 V AC 50/60 Hz
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.800 cm
Package 1 Width9.500 cm
Package 1 Length12.000 cm
Package 1 Weight390.000 g
Unit Type of Package 2S02
Number of Units in Package 216
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight6.800 kg
The LC1D098F7 contactor from the TeSys Deca Advanced series by Schneider Electric is a 4-pole contactor designed for use in industrial applications. It is intended for resistive loads and corresponds to usage category AC-1. The device features a contact configuration of 2 normally closed and 2 normally open contacts in the main current circuit, as well as additional auxiliary contacts with 1 normally closed and 1 normally open contact, mechanically linked and thus suitable for secure control tasks. The control circuit voltage is 110 V AC at 50/60 Hz, with operating voltage fluctuations ranging from 0.8 to 1.1 times the rated voltage (at 50 Hz) or 0.85 to 1.1 times the rated voltage (at 60 Hz). The coil is designed without an integrated control module.

Applications
This contactor is designed for use in industrial applications, particularly in applications involving resistive loads, such as heaters, dynamic brakes, or other non-inductive consumers. Category AC-1 ensures reliability under continuous load. The mechanically linked auxiliary contacts enable use in safety applications where secure signal transmission is required. Certifications according to RINA, CCC, GL, GOST, DNV, BV, LROS, CSA, and UL confirm suitability for international applications, especially in shipping and machinery construction.

Functions and Equipment in Detail
The device offers an operational rating of 20 A in the current circuit and is designed for a rated operating voltage up to 690 V (IEC 60947-4-1). The rated insulation voltage is 690 V for the current circuit and 600 V for the signal circuit, with CSA and UL approvals also specifying 600 V. The impulse voltage withstand is 6 kV, ensuring high electrical stability. Overvoltage category III and pollution degree 3 indicate suitability for industrial environments with increased contamination risk.

Technology Explained Simply
The contactor coil consumes 70 VA at pull-in (50/60 Hz) and 7 VA at holding (50 Hz) or 7.5 VA (60 Hz). Heat dissipation is 2 to 3 W at 50/60 Hz. Operating time is 12 to 22 ms for closing and 4 to 19 ms for opening. The maximum operating rate is 3600 switching operations per hour at an ambient temperature of 60 °C. Mechanical life is 15 million switching cycles, and electrical life is 300,000 cycles at 20 A AC-1. The rated short-time current withstand is 105 A for 10 seconds and 210 A for 1 second in the current circuit. The rated breaking capacity is 250 A at 440 V, ensuring reliability during load switching.

Compatibility and Accessories
The contactor is equipped with a safety cover and can be extended with various accessories. These include, for example, time delay blocks such as LADR0 (delayed release 0.10–3.00 s) or LADR2 (delayed release 1–30.00 s), auxiliary switch blocks such as LADN11 (1NO+1NC non-delayed) or LADN02 (2NC non-delayed), and control modules such as LAD4VG (varistor 50–127 VAC) or LAD4RCU (RC circuit 110–250 VAC). These components allow flexible adaptation to specific control requirements.

Mounting and Installation
Mounting is done via screw terminals with a tightening torque of 1.7 Nm, using either flathead screwdrivers (Ø 6 mm) or Phillips screwdrivers (No. 2). The terminals are equipped with Everlink and spring clamp technology, ensuring a secure and long-lasting electrical connection. Dimensions are 45 mm (width) × 85 mm (height) × 92 mm (depth), and the net weight is 0.365 kg.

Operational Advantages
The contactor offers high operational safety through mechanically linked contacts and mirror contacts, suitable for secure control tasks in safety applications. High lifespan and robust construction ensure long service life with minimal maintenance. International certifications enable use in various industries and regions. The integrated safety cover increases operational safety and protects against unintended access.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/585532
qrcode für Schneider Electric LC1D098F7 contactor 2S+2Ö 20A