Schneider Electric LC1D098B7, EAN: 3389110334159

Schneider Electric LC1D098B7 contactor 20A 24V

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LC1D098B7 contactor 20A 24V

Lieske Part No. 571009
Mfg Part No LC1D098B7
EAN-Code 3389110334159
Manufacturer Schneider Electric
Here only 67,09 EUR
79,84 EUR incl. VAT

Further information for Schneider Electric LC1D098B7 contactor 20A 24V

Complementary
Compatibility codeLC1D
Pole contact composition2 NO + 2 NC
Protective coverWith
[Ith] conventional free air thermal current20 A (at 60 °C) for power circuit; 10 A (at 60 °C) for signalling circuit
Irms rated making capacity250 A at 440 V for power circuit conforming to IEC 60947; 140 A AC for signalling circuit conforming to IEC 60947-5-1; 250 A DC for signalling circuit conforming to IEC 60947-5-1
Rated breaking capacity250 A at 440 V for power circuit conforming to IEC 60947
[Icw] rated short-time withstand current105 A 40 °C - 10 s for power circuit; 210 A 40 °C - 1 s for power circuit; 30 A 40 °C - 10 min for power circuit; 61 A 40 °C - 1 min for power circuit; 100 A - 1 s for signalling circuit; 120 A - 500 ms for signalling circuit; 140 A - 100 ms for signalling circuit
Associated fuse rating10 A gG for signalling circuit conforming to IEC 60947-5-1; 25 A gG at
Average impedance2.5 mOhm - Ith 25 A 50 Hz for power circuit
Power dissipation per pole1.56 W AC-1
[Ui] rated insulation voltagePower circuit: 690 V conforming to IEC 60947-4-1; Power circuit: 600 V CSA certified; Power circuit: 600 V UL certified; Signalling circuit: 690 V conforming to IEC 60947-1; Signalling circuit: 600 V CSA certified; Signalling circuit: 600 V UL certified
Overvoltage categoryIII
Pollution degree3
[Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947
Safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
Mechanical durability15 Mcycles
Electrical durability0.3 Mcycles 20 A AC-1 at Ue
Control circuit typeAC at 50/60 Hz
Coil technologyWithout built-in suppressor module
Control circuit voltage limits0.3...0.6 Uc (-40…60 °C):drop-out AC 50/60 Hz; 0.8...1.1 Uc (-40…60 °C):operational AC 50 Hz; 0.85...1.1 Uc (-40…60 °C):operational AC 60 Hz
Inrush power in VA70 VA 60 Hz cos phi 0.75 (at 20 °C); 70 VA 50 Hz cos phi 0.75 (at 20 °C)
Hold-in power consumption in VA7.5 VA 60 Hz cos phi 0.3 (at 20 °C); 7 VA 50 Hz cos phi 0.3 (at 20 °C)
Heat dissipation2…3 W at 50/60 Hz
Operating time12...22 ms closing; 4...19 ms opening
Maximum operating rate3600 cyc/h at 60 °C
Auxiliary contact composition1 NO + 1 NC
Auxiliary contacts typetype mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1; type mirror contact 1 NC conforming to IEC 60947-4-1
Signalling circuit frequency25...400 Hz
Minimum switching voltage17 V for signalling circuit
Minimum switching current5 mA for signalling circuit
Insulation resistance> 10 MOhm for signalling circuit
Non-overlap time1.5 ms on de-energisation between NC and NO contact; 1.5 ms on energisation between NC and NO contact
Mounting supportPlate; Rail
Contractual warranty
Warranty (in months)18
Environment
StandardsCSA C22.2 No 14; EN 60947-4-1; EN 60947-5-1; IEC 60947-4-1; IEC 60947-5-1; UL 60947-4-1; IEC 60335-1:Clause 30.2; IEC 60335-2-40:Annex JJ; UL 60335-2-40:Annex JJ; CSA C22.2 No 60947-4-1
Product certificationsUL; CCC; CSA; Marine; UKCA; EAC; CB Scheme
IP degree of protectionIP20 front face conforming to IEC 60529
Protective treatmentTH conforming to IEC 60068-2-30
Climatic withstandconforming to IACS E10 exposure to damp heat; conforming to IEC 60947-1 Annex Q category D exposure to damp heat
Permissible ambient air temperature around the device-40…60 °C; 60…70 °C with derating
Operating altitude0...3000 m
Fire resistance850 °C conforming to IEC 60695-2-1
Flame retardanceV1 conforming to UL 94
Mechanical robustnessVibrations contactor open (2 Gn, 5...300 Hz) ; Vibrations contactor closed (4 Gn, 5...300 Hz) ; Shocks contactor open (10 Gn for 11 ms) ; Shocks contactor closed (15 Gn for 11 ms)
Height85 mm
Width45 mm
Depth92 mm
Net weight0.365 kg
Logistical informations
Country of originID
Main
Range of productTeSys Deca Advanced
Product or component typeContactor
Device short nameLC1D
Contactor applicationResistive load
Utilisation categoryAC-1
Poles description4P
[Ue] rated operational voltagePower circuit:
[Ie] rated operational current20 A (at
[Uc] control circuit voltage24 V AC 50/60 Hz
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.500 cm
Package 1 Width9.500 cm
Package 1 Length12.000 cm
Package 1 Weight392.000 g
Unit Type of Package 2S02
Number of Units in Package 216
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight6.786 kg
The LC1D098B7 contactor from the TeSys Deca Advanced series by Schneider Electric is a 4-pole contactor designed for use in industrial applications. It is intended for resistive loads and corresponds to usage category AC-1. The primary function of the contactor is the safe and reliable control of electrical circuits, with a rated operational current of 20 A. The control circuit voltage is 24 V AC at 50/60 Hz, making it suitable for applications with standard supply voltages. The device features a contact configuration of 2 normally closed and 2 normally open contacts in the main circuit, supplemented by additional auxiliary contacts with 1 normally closed and 1 normally open contact, mechanically linked to ensure secure signal transmission. The auxiliary contacts comply with standards IEC 60947-5-1 and IEC 60947-4-1, with the mirror contact providing additional safety functions.

Applications
This contactor is designed for use in industrial applications, particularly in applications involving resistive loads, such as heating, lighting, or resistance operation. The AC-1 category makes it suitable for applications where no inductive or capacitive loads are present in the main circuit. Certifications according to DNV, GL, UL, CCC, RINA, CSA, BV, LROS (Lloyds Register of Shipping), and GOST highlight its suitability for international and marine applications, where high safety and reliability requirements apply.

Functions and Equipment in Detail
The device features a safety cover that enables protected access to the contacts. Electrical connections are made via Everlink and spring terminals, ensuring a secure and long-lasting connection. The tightening torque is 1.7 Nm for all screw terminals, both in the main and control circuits, with installation possible using a flat-head screwdriver Ø 6 or Phillips No. 2. The maximum operating rate is 3600 switching cycles per hour at an ambient temperature of 60 °C, enabling high load capacity in continuously operated installations.

Technology Explained Simply
The contactor coil is designed for 24 V AC and operates at frequencies of 50/60 Hz. The pickup power is 70 VA at 50 and 60 Hz, while the holding power consumption is 7 VA (50 Hz) or 7.5 VA (60 Hz). The operating time is 12–22 ms for closing and 4–19 ms for opening, enabling rapid response to control signals. The rated insulation voltage is 690 V for the circuit and complies with standards IEC 60947-4-1, CSA, and UL for 600 V. The impulse voltage withstand is 6 kV, ensuring high electrical strength even under transient voltage surges. The overvoltage category III and pollution degree 3 indicate suitability for industrial environments with increased contamination risk.

Compatibility and Accessories
The contactor is compatible with various accessories, including auxiliary switch blocks such as LADN31, LADN11, LADN40, LADN04, LADN02, LADN13, LAD8N02, and LAD8N11, which provide additional normally closed and normally open contacts depending on requirements. Time delay blocks such as LADR0, LADR2, LADT2, LADT4, and LADT0 enable delayed switching operations. Motor protection relays such as LRD04 and LRD03, as well as varistors such as LAD-4VE and control module LAD4RCE, are also available to adapt the contactor to specific applications. Combining these components extends functionality for complex control and protection systems.

Mounting and Installation
Mounting is done via screw terminals with a tightening torque of 1.7 Nm. Dimensions are 45 mm (width) × 85 mm (height) × 92 mm (depth), allowing compact placement in enclosures. Heat dissipation is 2–3 W at 50/60 Hz, requiring efficient cooling in enclosed switchgear. The operating temperature range is from -40 °C to +60 °C, with control circuit voltage limits at 0.3–0.6 Uc (drop voltage) and 0.8–1.1 Uc (operation).

Operational Advantages
The contactor offers a high mechanical life of 15 million switching cycles and an electrical life of 300,000 cycles at 20 A AC-1. The rated short-time withstand current is 105 A at 10 s and 210 A at 1 s in the circuit, ensuring high stability during short-term overloads. The rated breaking capacity is 250 A at 440 V, ensuring reliability under high loads. The safety cover and mechanically linked auxiliary contacts enhance safety in critical applications. Certifications according to international standards guarantee suitability for global and marine applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/571009
qrcode für Schneider Electric LC1D098B7 contactor 20A 24V