Schneider Electric LADT2, EAN: 3389110385892

Schneider Electric LADT2 Time Block 1S+1N delayed 0.1-30s Screw

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LADT2 Time Block 1S+1N delayed 0.1-30s Screw

Lieske Part No. 413156
Mfg Part No LADT2
EAN-Code 3389110385892
Manufacturer Schneider Electric
Here only 96,90 EUR
115,31 EUR incl. VAT

Further information for Schneider Electric LADT2 Time Block 1S+1N delayed 0.1-30s Screw

Complementary
Irms rated making capacity140 A at
Permissible short-time rating100 A 60 °C 1 s; 120 A 60 °C 500 ms; 140 A 60 °C 100 ms
Protection typeGG fuse 10 A
Mechanical durability5 Mcycles
Minimum switching current5 mA
Minimum switching voltage17 V
Non-overlap time1.5 ms on de-energisation no overlap between NC and NO contact; 1.5 ms on energisation no overlap between NC and NO contact
Insulation resistance> 10 MOhm
Connections - terminalsScrew clamp terminals 1 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 1 cable(s) 1…2.5 mm²flexible without cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible without cable end; Screw clamp terminals 1 cable(s) 1…2.5 mm²rigid; Screw clamp terminals 2 cable(s) 1…2.5 mm²rigid; Screw clamp terminals
Tightening torque1.7 N.m - with screwdriver flat Ø 6 mm; 1.7 N.m - with screwdriver Philips No 2; 1.7 N.m - with screwdriver pozidriv No 2
Height48 mm
Width44 mm
Depth61 mm
ColourDark grey
Contractual warranty
Warranty (in months)18
Environment
Environmental characteristicNormal environment
IP degree of protectionIP20 conforming to IEC 60529
Protective treatmentTH conforming to IEC 60068
Ambient air temperature for storage-60…80 °C
Ambient air temperature for operation-40…70 °C
Operating altitude3000 m
Logistical informations
Country of originFR
Main
RangeTeSys; TeSys Deca
Product nameTeSys Deca
Product or component typeTime delay auxiliary contact block
Range compatibilityTeSys Deca CAD; TeSys Deca LC1D; TeSys F LC1F; TeSys F CR1F
Mounting locationFront
Pole contact composition1 NO + 1 NC
Contacts operationTime delay
Timer typeOn delay
Time delay range1...30 s
[Ue] rated operational voltage690 V AC 25...400 Hz
[Ie] rated operational current6 A at 120 V AC-15; 1.04 A at 690 V AC-15; 0.55 A at 125 V DC-13; 0.1 A at 600 V DC-13
[Ui] rated insulation voltage690 V conforming to IEC 60947-5-1; 600 V conforming to UL 60947-5-1; 600 V conforming to CSA C22.2 No 60947-5-1
[Ith] conventional free air thermal current10 A (at 60 °C)
StandardsEN/IEC 60947-5-1; UL 60947-5-1; CSA C22.2 No 60947-5-1; GB/T 14048.5; EN 50012; IEC 60335-1:Clause 30.2; IEC 60335-2-40:Annex JJ; UL 60335-2-40:Annex JJ
Product certificationsIECEE CB Scheme; UL; CSA; CCC; EAC; UKCA
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.2 cm
Package 1 Width6.5 cm
Package 1 Length5 cm
Package 1 Weight74 g
Unit Type of Package 2BB1
Number of Units in Package 210
Package 2 Height5.2 cm
Package 2 Width13 cm
Package 2 Length24 cm
Package 2 Weight752 g
Unit Type of Package 3S03
Number of Units in Package 3140
Package 3 Height30 cm
Package 3 Width30 cm
Package 3 Length40 cm
Package 3 Weight11 kg
The terminals are designed for cable cross-sections of 1 to 2.5 mm² flexible (with or without cable end) and 1 to 2.5 mm² rigid. The tightening torque is 1.7 Nm, and installation can be performed using a flat screwdriver Ø 6, Phillips No. 2, or Position No. 2.

Applications include use in industrial control systems where a time-delayed switching function is required for auxiliary functions such as start-up control, safety shutdowns, or signal delays. The module is front-mounted snap-in into the corresponding contactors, allowing it to be integrated into existing control systems without requiring additional mounting components. The rated operational voltage is 690 V AC in the frequency range of 25 to 400 Hz. The rated insulation voltage is 690 V according to IEC 60947-5-1, 600 V according to UL 60947-5-1, and CSA C22.2 No. 60947-5-1. The rated operational currents depend on voltage and load type: 6 A at 120 V AC-15, 1.04 A at 690 V AC-15, 0.55 A at 125 V DC-13, and 0.1 A at 600 V DC-13.

Technology explained simply: The time delay occurs when the contactor is energized, with the contact switching only after the set delay time. This enables controlled, delayed activation of auxiliary functions. The mechanical life is 5 million switching cycles, indicating high durability in industrial applications. The permissible short-time current is 100 A at 60 °C for 1 second, 120 A for 500 ms, and 140 A for 100 ms. The module is equipped with a GG fuse 10 A to protect against overloads. The conventional thermal current in free air is 10 A at 60 °C. The insulation resistance is greater than 10 MΩ, ensuring high electrical insulation.

Compatibility and accessories: The module is specifically designed for integration into the specified TeSys contactor series. The product list includes various power contactors from the LC1D and LC1F series that are compatible with the LADT2, such as LC1D65AMD, LC1D38BD, LC1D150V7, LC1D50ASD, LC1D258B7, LC1D80F7, LC1D25X7, LC1D18M7, LC1D80P7, LC1D50AU7, LC1D80V7, LC1D258V7, LC1D18FD, LC1DT40E7, LC1D258SD, and LC1D80AE7. These can be combined with the time block to implement time-delayed auxiliary functions.

Mounting and installation: Mounting is done by front snap-in into the corresponding contactors. Dimensions are 44 mm width, 48 mm height, and 61 mm depth. The color is dark gray. The protection rating IP20 according to IEC 60529 protects against finger contact and solid foreign objects, but is not suitable for outdoor use or humid environments. The operating ambient temperature ranges from -40 °C to +70 °C, and the storage temperature ranges from -60 °C to +80 °C. The maximum operating altitude is 3,000 m above sea level. The coating corresponds to category TH according to IEC 60068, indicating high resistance to environmental influences.

Operational advantages: Integration into existing contactors enables flexible expansion of control functions without additional components. The time delay of 1 to 30 seconds offers sufficient flexibility for various applications. The high mechanical life and robust construction with screw terminals ensure reliable performance in industrial environments. Certifications according to EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No. 60947-5-1, GB/T 14048.5, EN 50012, as well as IEC 60335-1:Clause 30.2 and IEC 60335-2-40:Annex JJ, guarantee compliance with international safety and quality standards. Product certifications include IECEE CB Scheme, UL, CSA, CCC, EAC, and UKCA.

The module is available in single packaging (PCE), with one unit per pack. The warranty is 18 months.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/413156
qrcode für Schneider Electric LADT2 Time Block 1S+1N delayed 0.1-30s Screw