| Complementary |
| Irms rated making capacity | 140 A at |
| Permissible short-time rating | 100 A 60 °C 1 s; 120 A 60 °C 500 ms; 140 A 60 °C 100 ms |
| Protection type | GG fuse 10 A |
| Mechanical durability | 5 Mcycles |
| Minimum switching current | 5 mA |
| Minimum switching voltage | 17 V |
| Non-overlap time | 1.5 ms on de-energisation no overlap between NC and NO contact; 1.5 ms on energisation no overlap between NC and NO contact |
| Insulation resistance | > 10 MOhm |
| Connections - terminals | Screw clamp terminals 1 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 1 cable(s) 1…2.5 mm²flexible without cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible without cable end; Screw clamp terminals 1 cable(s) 1…2.5 mm²rigid; Screw clamp terminals 2 cable(s) 1…2.5 mm²rigid; Screw clamp terminals |
| Tightening torque | 1.7 N.m - with screwdriver flat Ø 6 mm; 1.7 N.m - with screwdriver Philips No 2; 1.7 N.m - with screwdriver pozidriv No 2 |
| Height | 48 mm |
| Width | 44 mm |
| Depth | 61 mm |
| Colour | Dark grey |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Environmental characteristic | Normal environment |
| IP degree of protection | IP20 conforming to IEC 60529 |
| Protective treatment | TH conforming to IEC 60068 |
| Ambient air temperature for storage | -60…80 °C |
| Ambient air temperature for operation | -40…70 °C |
| Operating altitude | 3000 m |
| Logistical informations |
| Country of origin | FR |
| Main |
| Range | TeSys; TeSys Deca |
| Product name | TeSys Deca |
| Product or component type | Time delay auxiliary contact block |
| Range compatibility | TeSys Deca CAD; TeSys Deca LC1D; TeSys F LC1F; TeSys F CR1F |
| Mounting location | Front |
| Pole contact composition | 1 NO + 1 NC |
| Contacts operation | Time delay |
| Timer type | On delay |
| Time delay range | 0.3...3 s |
| [Ue] rated operational voltage | 690 V AC 25...400 Hz |
| [Ie] rated operational current | 6 A at 120 V AC-15; 1.04 A at 690 V AC-15; 0.55 A at 125 V DC-13; 0.1 A at 600 V DC-13 |
| [Ui] rated insulation voltage | 690 V conforming to IEC 60947-5-1; 600 V conforming to UL 60947-5-1; 600 V conforming to CSA C22.2 No 60947-5-1 |
| [Ith] conventional free air thermal current | 10 A (at 60 °C) |
| Standards | EN/IEC 60947-5-1; UL 60947-5-1; CSA C22.2 No 60947-5-1; GB/T 14048.5; EN 50012; IEC 60335-1:Clause 30.2; IEC 60335-2-40:Annex JJ; UL 60335-2-40:Annex JJ |
| Product certifications | IECEE CB Scheme; UL; CSA; CCC; EAC; UKCA |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 5.200 cm |
| Package 1 Width | 6.500 cm |
| Package 1 Length | 5.000 cm |
| Package 1 Weight | 74.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 140 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 11.018 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 1120 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 60.000 cm |
| Package 3 Length | 80.000 cm |
| Package 3 Weight | 101.340 kg |
The article LADT0 from Schneider Electric is a
time-delayed auxiliary switch block from the
TeSys Deca series, specifically designed for integration into contactors and contactor relays. It serves as an
ansprechverzögertes Hilfselement and enables a time-controlled switching function, which may be required for controlling drives, pumps, or other industrial systems. The block is
mounted front-side and is designed for use with the product families
TeSys Deca CAD, TeSys Deca LC1D, TeSys F LC1F, and TeSys F CR1F.
Applications
The auxiliary switch block is used in industrial control systems where
switch-on delay is required, for example, to limit the inrush current of motors or to implement time-delayed switching operations. It is suitable for applications in manufacturing automation, building automation, or the machine construction industry, where precise timing of switching operations is necessary. The
time delay ranges from 0.3 to 3 seconds, allowing flexible adaptation to various requirements.
Functions and Equipment in Detail
The block features a
contact configuration of 1 normally open (S) and 1 normally closed (Oe), which can be used for controlling auxiliary circuits. The
operation is controlled by a time delay, where the switch only activates after the set delay time following energization. The
non-overlap time is 1.5 ms, meaning there is no overlap period between opening and closing of the contacts to prevent short circuits. The
minimum switching voltage is 17 V, and the
minimum switching current is 5 mA, enabling use even with weak control signals.
Technology Explained Simply
The auxiliary switch block is equipped with
screw terminals suitable for cable cross-sections of
1 to 2.5 mm² (flexible or rigid). The tightening torque is
1.7 Nm, and installation can be performed using a flat screwdriver (Ø 6 mm), a Phillips screwdriver (No. 2), or a positioning screwdriver (No. 2). The
rated voltage is 690 V AC at a frequency of 25 to 400 Hz, making it suitable for use in industrial networks. The
rated insulation voltage corresponds to 690 V according to IEC 60947-5-1 and 600 V according to UL 60947-5-1 and CSA C22.2 No. 60947-5-1. The
conventional thermal current is 10 A at 60 °C, defining the load capacity during operation.
Compatibility and Accessories
The LADT0 is compatible with various contactor models from the TeSys family, including
LC1D09MD, LC1D95P7, LC1D25T7, LC1D188U7, LC1D188E7, LC1D38KUE, LC1D09E7TQ, LC1D65008M7, LC1DT20P7, LP1D40008FD, LC1D188BD, LC1D18EHE, LC1D50AND, LC1DT60AV7, LC1D188M7, LC1D09E7, LC1D40AG7, LC1D32ND, LC1D12B7, and LP1D80008BD. These models cover a wide range of power and voltage classes, allowing the time block to be flexibly integrated into existing control systems.
Mounting and Installation
Mounting is done
front-side by clipping onto the corresponding contactor. Dimensions are
44 mm (width), 48 mm (height), and 61 mm (depth), enabling compact placement in enclosures. The
protection rating IP20 according to IEC 60529 protects against finger contact, but is not suitable for outdoor use or environments with dust and splashing water. The
operating ambient temperature ranges from -40 °C to 70 °C, and the operating altitude is limited to
3,000 m. The
coating corresponds to TH according to IEC 60068, ensuring resistance to environmental influences.
Advantages in Operation
The auxiliary switch block offers a
mechanical life of 5 million switching cycles, ensuring high reliability in long-term applications. The
permissible short-time performance is 100 A at 1 second, 120 A at 500 ms, and 140 A at 100 ms, ensuring stability under transient loads. The
rated switching capacity is 140 A, and the
insulation resistance is over 10 MΩ, enhancing electrical safety. The
housing color is dark gray, providing good visibility in enclosures. The
warranty is 18 months.
Standards and Certifications
The product complies with standards
EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No. 60947-5-1, GB/T 14048.5, EN 50012, IEC 60335-1:Clause 30.2, IEC 60335-2-40:Annex JJ, UL 60335-2-40:Annex JJ. Additionally, it is certified with
IECEE CB-Scheme, UL, CSA, CCC, EAC, UKCA, ensuring international usability.