Schneider Electric LADS2, EAN: 3389110386103

Schneider Electric LADS2 LAD-S2 delayed auxiliary switch block 1–30 s

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LADS2 LAD-S2 delayed auxiliary switch block 1–30 s

Lieske Part No. 714482
Mfg Part No LADS2
EAN-Code 3389110386103
Manufacturer Schneider Electric
Here only 104,41 EUR
124,25 EUR incl. VAT

Further information for Schneider Electric LADS2 LAD-S2 delayed auxiliary switch block 1–30 s

Complementary
Irms rated making capacity140 A at
Permissible short-time rating100 A 60 °C 1 s; 120 A 60 °C 500 ms; 140 A 60 °C 100 ms
Protection typeGG fuse 10 A
Mechanical durability5 Mcycles
Minimum switching current5 mA
Minimum switching voltage17 V
Non-overlap time1.5 ms on de-energisation no overlap between NC and NO contact; 1.5 ms on energisation no overlap between NC and NO contact
Insulation resistance> 10 MOhm
Connections - terminalsScrew clamp terminals 1 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 1 cable(s) 1…2.5 mm²flexible without cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible without cable end; Screw clamp terminals 1 cable(s) 1…2.5 mm²rigid; Screw clamp terminals 2 cable(s) 1…2.5 mm²rigid; Screw clamp terminals
Tightening torque1.7 N.m - with screwdriver flat Ø 6 mm; 1.7 N.m - with screwdriver Philips No 2; 1.7 N.m - with screwdriver pozidriv No 2
Height48 mm
Width44 mm
Depth61 mm
ColourDark grey
Contractual warranty
Warranty (in months)18
Environment
Environmental characteristicNormal environment
IP degree of protectionIP20 conforming to IEC 60529
Protective treatmentTH conforming to IEC 60068
Ambient air temperature for storage-60…80 °C
Ambient air temperature for operation-40…70 °C
Operating altitude3000 m
Logistical informations
Country of originFR
Main
RangeTeSys; TeSys Deca
Product nameTeSys Deca
Product or component typeTime delay auxiliary contact block
Range compatibilityTeSys Deca CAD; TeSys Deca LC1D; TeSys F LC1F; TeSys F CR1F
Device applicationStar delta starter
Mounting locationFront
Pole contact composition1 NO + 1 NC
Contacts operationTime delay
Timer typeOn delay
Time delay range1...30 s
[Ue] rated operational voltage690 V AC 25...400 Hz
[Ie] rated operational current6 A at 120 V AC-15; 1.04 A at 690 V AC-15; 0.55 A at 125 V DC-13; 0.1 A at 600 V DC-13
[Ui] rated insulation voltage690 V conforming to IEC 60947-5-1; 600 V conforming to UL 60947-5-1; 600 V conforming to CSA C22.2 No 60947-5-1
[Ith] conventional free air thermal current10 A (at 60 °C)
StandardsEN/IEC 60947-5-1; UL 60947-5-1; CSA C22.2 No 60947-5-1; GB/T 14048.5; EN 50012; IEC 60335-1:Clause 30.2; IEC 60335-2-40:Annex JJ; UL 60335-2-40:Annex JJ
Product certificationsIECEE CB Scheme; UL; CSA; CCC; EAC; UKCA
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.2 cm
Package 1 Width6.5 cm
Package 1 Length4.8 cm
Package 1 Weight82 g
Unit Type of Package 2BB1
Number of Units in Package 210
Package 2 Height5.2 cm
Package 2 Width13 cm
Package 2 Length24 cm
Package 2 Weight836 g
Unit Type of Package 3S03
Number of Units in Package 3140
Package 3 Height30 cm
Package 3 Width30 cm
Package 3 Length40 cm
Package 3 Weight12.202 kg
The TeSys Deca auxiliary switch block type LAD-S2 from Schneider Electric is a time-delayed auxiliary switch block with ansprechverzögerter function, specifically designed for use in star-delta starter applications. It serves as an on-delay and enables controlled, time-regulated switching operations to reduce mechanical stress during the motor start-up phase. The delay time can be adjusted within a range of 1 to 30 seconds, making it suitable for applications with variable start-up durations. The block is designed for front mounting on contactors of the series TeSys Deca CAD, TeSys Deca LC1D, TeSys F LC1F, and TeSys F CR1F and is secured using a front-side snap-in mounting method.

Applications primarily include motor control in industrial systems where a gentle start-up phase is required to minimize current surges and mechanical stress. Use in star-delta circuits is typical, as the delay controls the time between switching from star to delta configuration. The composition of the pole contact consists of 1 normally open (S) and 1 normally closed (Ö), enabling flexible integration into existing control circuits.

Functions and equipment in detail include an on-delay with a defined time range of 1 to 30 seconds. The contacts are designed to prevent overlap between the normally closed and normally open contacts — the non-overlapping time is 1.5 ms both during energizing and de-energizing. This ensures a safe and reliable switching sequence. The screw terminals allow connection of cables with a cross-section of 1 to 2.5 mm², both flexible and rigid, with or without wire end ferrules. The tightening torque is 1.7 Nm, and mounting can be done using a flat-head screwdriver (Ø 6), a Phillips screwdriver No. 2, or a positioning screwdriver No. 2.

Technology explained simply shows that the block supports an operating rated voltage of 690 V AC at frequencies from 25 to 400 Hz. The rated insulation voltage is 690 V according to IEC 60947-5-1, 600 V according to UL 60947-5-1, and CSA C22.2 No. 60947-5-1. The conventional thermal current in free air is 10 A at 60 °C, describing the thermal load capacity under normal operating conditions. The mechanical life is 5 million switching cycles, indicating high reliability and longevity. The minimum switching voltage is 17 V, and the minimum switching current is 5 mA, highlighting the sensitivity of the block at low signal levels.

Compatibility and accessories refer to use with contactors of the series TeSys Deca CAD, TeSys Deca LC1D, TeSys F LC1F, and TeSys F CR1F. Compatible contactors available in the range include models such as LC1DT80AM7, LC1DT40BL, LC1D18Q7, LC1D32X7, LC1D25SC7, LC1D188P7, LC1D258BD, LC1D95M5, LC1D18U7TQ, LC1D115U7, LC1D95E7, LC1D12D7, LC1D25BNE, LC1D80E5, LC1D40008B7, LC1D32D7, LC1D09V7, LC1D40AFE7, LC1D80BW, LC1DT32B7. These contactors are designed for different power ratings, voltages, and control current types and allow flexible combination with the LAD-S2.

Mounting and installation is performed on the front side of the contactors, with the block secured via a snap mechanism. Dimensions are 44 mm width, 48 mm height, and 61 mm depth. The color is dark gray, matching the standard design of the TeSys series. The protection rating IP20 according to IEC 60529 protects against finger contact and solid foreign objects, but not against water or dust. The operating ambient temperature ranges from -40 to 70 °C, and the storage temperature ranges from -60 to 80 °C. The maximum operating altitude is 3,000 meters above sea level.

Operational advantages include safe and precise time control for start-up processes, high mechanical life, and easy mounting on compatible contactors. The screw terminals provide a robust and reliable connection, while the adjustable delay time allows adaptation to specific requirements. The certifications according to EN/IEC 60947-5-1, UL, CSA, CCC, EAC, and UKCA ensure compliance with international safety and quality standards. The rated make capacity of 140 A and the permissible short-time performance (100 A/1 s, 120 A/500 ms, 140 A/100 ms) ensure stability under transient loads. The insulation resistance exceeding 10 MΩ guarantees high electrical insulation and safety.

The block is designed for normal ambient conditions and complies with coating class TH according to IEC 60068. The warranty period is 18 months.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/714482
qrcode für Schneider Electric LADS2 LAD-S2 delayed auxiliary switch block 1–30 s