Schneider Electric LADR4, EAN: 3389110386233

Schneider Electric LADR4 auxiliary switch block delayed reset

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LADR4 auxiliary switch block delayed reset

Lieske Part No. 130598
Mfg Part No LADR4
EAN-Code 3389110386233
Manufacturer Schneider Electric
Here only 108,77 EUR
129,44 EUR incl. VAT

Further information for Schneider Electric LADR4 auxiliary switch block delayed reset

Complementary
Irms rated making capacity140 A at
Permissible short-time rating100 A 60 °C 1 s; 120 A 60 °C 500 ms; 140 A 60 °C 100 ms
Protection typeGG fuse 10 A
Mechanical durability5 Mcycles
Minimum switching current5 mA
Minimum switching voltage17 V
Non-overlap time1.5 ms on de-energisation no overlap between NC and NO contact; 1.5 ms on energisation no overlap between NC and NO contact
Insulation resistance> 10 MOhm
Connections - terminalsScrew clamp terminals 1 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 1 cable(s) 1…2.5 mm²flexible without cable end; Screw clamp terminals 1 cable(s) 1…2.5 mm²rigid; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible without cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²rigid; Screw clamp terminals
Tightening torque1.7 N.m - with screwdriver flat Ø 6 mm; 1.7 N.m - with screwdriver Philips No 2; 1.7 N.m - with screwdriver pozidriv No 2
Height48 mm
Width44 mm
Depth61 mm
ColourDark grey
Contractual warranty
Warranty (in months)18
Environment
Environmental characteristicNormal environment
IP degree of protectionIP20 conforming to IEC 60529
Protective treatmentTH conforming to IEC 60068
Ambient air temperature for storage-60…80 °C
Ambient air temperature for operation-40…70 °C
Operating altitude3000 m
Logistical informations
Country of originFR
Main
RangeTeSys; TeSys Deca
Product nameTeSys Deca
Product or component typeTime delay auxiliary contact block
Range compatibilityTeSys Deca CAD; TeSys Deca LC1D; TeSys F LC1F; TeSys F CR1F
Mounting locationFront
Pole contact composition1 NO + 1 NC
Contacts operationTime delay
Timer typeOff delay
Time delay range10...180 s
[Ue] rated operational voltage690 V AC 25...400 Hz
[Ie] rated operational current6 A at 120 V AC-15; 1.04 A at 690 V AC-15; 0.55 A at 125 V DC-13; 0.1 A at 600 V DC-13
[Ui] rated insulation voltage690 V conforming to IEC 60947-5-1; 600 V conforming to UL 60947-5-1; 600 V conforming to CSA C22.2 No 60947-5-1
[Ith] conventional free air thermal current10 A (at 60 °C)
StandardsEN/IEC 60947-5-1; UL 60947-5-1; CSA C22.2 No 60947-5-1; GB/T 14048.5; EN 50012; IEC 60335-1:Clause 30.2; IEC 60335-2-40:Annex JJ; UL 60335-2-40:Annex JJ
Product certificationsIECEE CB Scheme; UL; CSA; CCC; EAC; UKCA
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.200 cm
Package 1 Width6.500 cm
Package 1 Length5.000 cm
Package 1 Weight75.600 g
Unit Type of Package 2BB1
Number of Units in Package 210
Package 2 Height5.200 cm
Package 2 Width12.800 cm
Package 2 Length24.000 cm
Package 2 Weight756.000 g
Unit Type of Package 3S03
Number of Units in Package 3140
Package 3 Height30.000 cm
Package 3 Width30.000 cm
Package 3 Length40.000 cm
Package 3 Weight11.129 kg
The LADR4 from Schneider Electric is a time-delayed auxiliary switch block from the TeSys Deca series, specifically designed for front mounting on TeSys Deca CAD, TeSys Deca LC1D, TeSys F LC1F, and TeSys F CR1F contactors. It serves as an add-on component to extend control functions in industrial installations, with the time delay in the de-energizing operation (drop-out delay) enabling controlled signal delay. The block features a contact configuration of 1 normally open (S) and 1 normally closed (Oe), rated for an operating voltage up to 690 V AC at frequencies from 25 to 400 Hz. The operating current ratings are 6 A at 120 V AC-15, 1.04 A at 690 V AC-15, 0.55 A at 125 V DC-13, and 0.1 A at 600 V DC-13. The rated insulation voltage is 690 V according to IEC 60947-5-1, 600 V according to UL 60947-5-1, and CSA C22.2 No. 60947-5-1.

Applications

The LADR4 is used in industrial control systems where a time-delayed signal feedback is required, for example, to avoid short-term disturbances or to synchronize process steps. The drop-out delay range of 10 to 180 seconds allows precise adjustment to specific applications. Compatibility with the mentioned contactor series makes it a universal add-on module for existing installations.

Functions and Features in Detail

The auxiliary switch block is equipped with screw terminals suitable for cable cross-sections from 1 to 2.5 mm², both flexible (with or without wire end ferrule) and rigid. The tightening torque is 1.7 Nm, and installation can be performed using a flat-head screwdriver Ø 6, a Phillips screwdriver No. 2, or a positioning screwdriver No. 2. The mechanical life is 5 million operations, ensuring high operational reliability and durability. The minimum switching voltage is 17 V, and the minimum switching current is 5 mA, ensuring reliability even under low-load conditions. The insulation resistance is greater than 10 MΩ, ensuring high electrical safety.

Technology Explained Simply

The time delay occurs during de-energizing operation, i.e., when the switch transitions from active to inactive. The delay of 10 to 180 seconds is achieved via an integrated timing mechanism that maintains the contact position for the set duration after the switching operation is triggered. Contacts switch without overlap within 1.5 ms, ensuring safe separation between normally closed and normally open contacts. The permissible short-time current is 100 A at 60 °C for 1 second, 120 A for 500 ms, and 140 A for 100 ms, highlighting robustness under transient loads. The conventional thermal current is 10 A at an ambient temperature of 60 °C.

Compatibility and Accessories

The LADR4 is specifically designed for integration into contactor systems of the TeSys Deca and TeSys F series. It can be combined with various power contactors, including models such as LC1D12C7, LC1D128F7, LC1D115004U7, LC1DT80AM7, LP1D65008BD, LC1D50ABNE, LC1D09BD, LC1D25SC7, LC1D32FD, CAD32R7, LC1D098MD, LC1D80Q7, LC1D12CD, LC1DT32B7, LC1D12V7, LC1D32U7, LC1D188F7, LC1D18ND, LC1D258ED, and LC1D25C7. Installation is performed by snapping onto the front of the contactor, enabling quick and tool-free mounting.

Mounting and Installation

Mounting is done directly onto the front of the contactor by snapping, eliminating the need for additional fastening elements. The screw terminals allow for secure and durable connections to control wiring. Dimensions are 48 mm height, 44 mm width, and 61 mm depth. The housing color is dark gray. The protection rating IP20 according to IEC 60529 protects against finger contact and ingress of solid foreign objects larger than 12.5 mm, but not against water or dust. The operating temperature range is from -40 °C to +70 °C, and the storage temperature range is from -60 °C to +80 °C. The maximum operating altitude is 3,000 m above sea level.

Operational Advantages

The LADR4 offers high reliability with a mechanical life of 5 million operations and a robust construction. The time delay enables precise control of processes, with the drop-out delay providing delayed signal deactivation for specific applications. Compatibility with various contactor series and simple front mounting facilitate integration into existing installations. Certifications according to EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No. 60947-5-1, GB/T 14048.5, EN 50012, IEC 60335-1:Clause 30.2, IEC 60335-2-40:Annex JJ, and UL 60335-2-40:Annex JJ, as well as product certifications IECEE CB-Scheme, UL, CSA, CCC, EAC, and UKCA, ensure compliance with international safety and quality standards. The product is RoHS- and REACH-compliant, ensuring environmental compatibility.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/130598
qrcode für Schneider Electric LADR4 auxiliary switch block delayed reset