Schneider Electric LADR06, EAN: 3389110821673

Schneider Electric LADR06 auxiliary switch block 1S1Ö latching

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LADR06 auxiliary switch block 1S1Ö latching

Lieske Part No. 511252
Mfg Part No LADR06
EAN-Code 3389110821673
Manufacturer Schneider Electric
Here only 104,02 EUR
123,78 EUR incl. VAT

Further information for Schneider Electric LADR06 auxiliary switch block 1S1Ö latching

Complementary
Irms rated making capacity140 A AC; 250 A DC
Permissible short-time rating100 A 60 °C 1 s; 120 A 60 °C 500 ms; 140 A 60 °C 100 ms
Protection typeGG fuse 10 A
Mechanical durability5 Mcycles
Minimum switching current5 mA
Minimum switching voltage17 V
Non-overlap time1.5 ms on de-energisation no overlap between NC and NO contact; 1.5 ms on energisation no overlap between NC and NO contact
Insulation resistance> 10 MOhm
Connections - terminalsLugs-ring terminals (external diameter: 8 mm)
Tightening torque1.7 N.m - with screwdriver flat Ø 6 mm; 1.7 N.m - with screwdriver Philips No 2; 1.7 N.m - with screwdriver pozidriv No 2
Height48 mm
Width44 mm
Depth61 mm
ColourDark grey
Contractual warranty
Warranty (in months)18
Environment
Environmental characteristicNormal environment
IP degree of protectionIP20 conforming to IEC 60529
Protective treatmentTH conforming to IEC 60068
Ambient air temperature for storage-60…80 °C
Ambient air temperature for operation-40…70 °C
Operating altitude3000 m
Logistical informations
Country of originFR
Main
RangeTeSys; TeSys Deca
Product nameTeSys Deca
Product or component typeTime delay auxiliary contact block
Range compatibilityTeSys D CAD; TeSys D LC1D; TeSys F LC1F; TeSys F CR1F; TeSys Deca CAD; TeSys Deca LC1D
Mounting locationFront
Pole contact composition1 NO + 1 NC
Contacts operationTime delay
Timer typeOff delay
Time delay range0.3...3 s
[Ue] rated operational voltage690 V AC 25...400 Hz
[Ie] rated operational current6 A at 120 V AC-15; 1.04 A at 690 V AC-15; 0.55 A at 125 V DC-13; 0.1 A at 600 V DC-13
[Ui] rated insulation voltage690 V conforming to IEC 60947-5-1; 600 V conforming to UL 60947-5-1; 600 V conforming to CSA C22.2 No 60947-5-1
[Ith] conventional free air thermal current10 A (at 60 °C)
StandardsEN/IEC 60947-5-1; UL 60947-5-1; CSA C22.2 No 60947-5-1; GB/T 14048.5; EN 50012; IEC 60335-1:Clause 30.2; IEC 60335-2-40:Annex JJ; UL 60335-2-40:Annex JJ
Product certificationsIECEE CB Scheme; UL; CSA; CCC; EAC; UKCA
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.1 cm
Package 1 Width5.2 cm
Package 1 Length6.6 cm
Package 1 Weight75 g
Unit Type of Package 2BB1
Number of Units in Package 210
Package 2 Height5.2 cm
Package 2 Width14 cm
Package 2 Length24 cm
Package 2 Weight757 g
Unit Type of Package 3S03
Number of Units in Package 3140
Package 3 Height30 cm
Package 3 Width30 cm
Package 3 Length40 cm
Package 3 Weight10.828 kg
The LADR06 from Schneider Electric is a time-delayed auxiliary switch block from the TeSys Deca series, specifically designed for mounting on the front side of contactors from the TeSys D and TeSys F series. It serves as an auxiliary contact module with an off-delay function, enabling time-controlled switching operations in industrial control systems. The device features one normally closed contact and one normally open contact (1 S + 1 Ö) and allows for a delay time of 0.3 to 3 seconds, making it suitable for applications requiring delayed de-energization of auxiliary circuits, for example, to avoid inrush currents or to synchronize machine components.

Applications

The auxiliary switch block is used in industrial control systems where time-controlled switching operations are required. It is compatible with various contactor models from the TeSys D and TeSys F families, including LC1D, LC1F, CR1F, CAD, and LC1D models from the TeSys Deca series. Typical use cases include installations requiring precise timing of switching operations, such as conveyor systems, packaging machines, or systems with sequential operating procedures.

Functions and Features in Detail

The LADR06 provides an off-delay time ranging from 0.3 to 3 seconds, achieved through a mechanical timing mechanism. The contacts are designed to prevent overlap between the normally open and normally closed contacts — during de-energization and actuation, the non-overlapping time is 1.5 ms. This ensures a safe and precise switching sequence. The contacts are rated for an operating voltage of 690 V AC (25–400 Hz), with operating current ratings varying by voltage: 6 A at 120 V AC-15, 1.04 A at 690 V AC-15, 0.55 A at 125 V DC-13, and 0.1 A at 600 V DC-13. Minimum switching voltage and current values are 17 V and 5 mA, enabling reliable operation even under low-load conditions.

Technical Explanation

The time delay is achieved via a mechanical reset mechanism that maintains a defined delay period after the switch is de-energized before the contact closes or opens. The rated insulation voltage is 690 V (corresponding to IEC 60947-5-1) and 600 V (corresponding to UL 60947-5-1 and CSA C22.2 No. 60947-5-1), ensuring safe insulation even at high voltages. The conventional thermal current is 10 A at 60 °C in free air, indicating the device’s thermal load capacity. The permissible short-time performance is 100 A for 1 second, 120 A for 500 ms, and 140 A for 100 ms at 60 °C, defining its short-term overload capability.

Compatibility and Accessories

The LADR06 is intended for mounting on contactors from the TeSys D and TeSys F series, particularly models such as LC1D1156N7, LC1D386MD, LC1D126B7, LC1D1156F7, LC1D096R7, LC1D1506G7, LC1D096CD, LC1D40A6U7, LC1DT206BD, LC1D186G7, LC1DT256P7, LC1D1506BD, LC1D806BD, LC1D186ND, LC1D096B7, LC1D65A6G7, LC1D1156U7, LC1D50A6P7, LC1D1156M5, and LC1D126FD. Connections are made via ring terminal lugs with an outer diameter of 8 mm, to be tightened with a torque of 1.7 Nm (using a flat screwdriver Ø 6, Phillips No. 2, or position No. 2). The protection rating IP20 corresponds to IEC 60529 and protects against finger contact, but not against dust or water.

Mounting and Installation

The auxiliary switch block is mounted on the front side of the contactor and is designed for normal ambient conditions. The operating temperature range is from -40 °C to 70 °C, and the storage temperature range is from -60 °C to 80 °C. The maximum operating altitude is 3,000 m above sea level. Dimensions are 44 mm (width), 48 mm (height), and 61 mm (depth), allowing integration into standardized control panels. The color is dark gray, providing good visibility in control installations.

Operational Advantages

The LADR06 offers reliable and precise time delay, essential for controlling complex industrial processes. The mechanical life is 5 million switching cycles, ensuring high operational safety and long service life. Insulation resistances exceed 10 MΩ, ensuring high electrical insulation. Compliance with international standards such as EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No. 60947-5-1, GB/T 14048.5, EN 50012, IEC 60335-1:Clause 30.2, IEC 60335-2-40:Annex JJ, and UL 60335-2-40:Annex JJ guarantees conformity with global safety and quality standards. Certifications include IECEE CB Scheme, UL, CSA, CCC, EAC, and UKCA, highlighting the device’s worldwide applicability.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/511252
qrcode für Schneider Electric LADR06 auxiliary switch block 1S1Ö latching