Schneider Electric LADN31, EAN: 3389110384178

Schneider Electric LADN31 Auxiliary Switch Block 3S1Ö front

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LADN31 Auxiliary Switch Block 3S1Ö front

Lieske Part No. 424404
Mfg Part No LADN31
EAN-Code 3389110384178
Manufacturer Schneider Electric
Here only 20,19 EUR
24,03 EUR incl. VAT

Further information for Schneider Electric LADN31 Auxiliary Switch Block 3S1Ö front

Complementary
Irms rated making capacity140 A AC conforming to IEC 60947-5-1; 250 A DC conforming to IEC 60947-5-1
Permissible short-time rating100 A 60 °C 1 s; 120 A 60 °C 500 ms; 140 A 60 °C 100 ms
Protection typeGG fuse 10 A
Mechanical durability30 Mcycles
Minimum switching current5 mA
Minimum switching voltage17 V
Non-overlap time1.5 ms on de-energisation no overlap between NC and NO contact; 1.5 ms on energisation no overlap between NC and NO contact
Insulation resistance> 10 MOhm
Connections - terminalsScrew clamp terminals 1 cable(s) 1…4 mm²flexible with cable end; Screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end; Screw clamp terminals 1 cable(s) 1…4 mm²rigid without cable end; Screw clamp terminals 2 cable(s) 1…4 mm²rigid without cable end
Tightening torque1.7 N.m - with screwdriver flat Ø 6 mm; 1.7 N.m - with screwdriver Philips No 2; 1.7 N.m - with screwdriver pozidriv No 2
Height48 mm
Width44 mm
Depth42 mm
Net weight0.05 kg
ColourDark grey
Contractual warranty
Warranty (in months)18
Environment
Environmental characteristicNormal environment
IP degree of protectionIP2X conforming to IEC 60529
Protective treatmentTH conforming to IEC 60068
Ambient air temperature for storage-60…80 °C
Ambient air temperature for operation-5…60 °C
Operating altitude3000 m
Logistical informations
Country of originFR
Main
RangeTeSys; TeSys Deca
Product nameTeSys Deca
Product or component typeAuxiliary contact block
Device short nameLADN
Range compatibilityTeSys D CAD; TeSys D LC1D; TeSys F LC1F; TeSys F CR1F; TeSys Deca CAD; TeSys Deca LC1D
Mounting locationFront
Pole contact composition3 NO + 1 NC
Contacts operationInstantaneous
[Ue] rated operational voltage690 V AC 25...400 Hz
[Ie] rated operational current6 A at 120 V AC-15; 1.04 A at 690 V AC-15; 0.55 A at 125 V DC-13; 0.1 A at 600 V DC-13
[Ui] rated insulation voltage690 V conforming to IEC 60947-5-1; 600 V conforming to UL; 600 V conforming to CSA
[Ith] conventional free air thermal current10 A (at 60 °C)
StandardsEN/IEC 60947-5-1; GB/T 14048.5; EN 50012; UL 60947-5-1; CSA C22.2 No 60947-5-1; IEC 60335-1:Clause 30.2; IEC 60335-2-40:Annex JJ; UL 60335-2-40:Annex JJ
Product certificationsCB Scheme; UL; CSA; CCC; EAC; UKCA
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5 cm
Package 1 Width4.2 cm
Package 1 Length4.3 cm
Package 1 Weight61 g
Unit Type of Package 2S03
Number of Units in Package 2160
Package 2 Height30 cm
Package 2 Width30 cm
Package 2 Length40 cm
Package 2 Weight10.246 kg
Unit Type of Package 3P06
Number of Units in Package 31280
Package 3 Height75 cm
Package 3 Width60 cm
Package 3 Length80 cm
Package 3 Weight91.968 kg
The auxiliary switch block LADN31 from Schneider Electric belongs to the TeSys Deca series and serves as an additional component for contactors of the series TeSys D CAD, TeSys D LC1D, TeSys F LC1F, TeSys F CR1F, as well as TeSys Deca CAD and TeSys Deca LC1D. It enables the integration of additional switching functions into existing contactor systems and is mounted on the front of the contactor. The block features a configuration with three closing contacts (3 S) and one opening contact (1 Ö), with switching operations occurring without delay. The contacts are designed for use in industrial control systems where fast and reliable signal transmission is required.

Auxiliary switch block is the technical designation for this module, serving as an extension for control technology. The screw terminals allow for flexible and secure connections with cables having a cross-section of 1 to 4 mm², both flexible and rigid, with or without wire ends. The tightening torque is 1.7 Nm, and mounting is done using a flathead screwdriver (Ø 6 mm) or a Phillips screwdriver (No. 2). The mechanical life expectancy is 30 million switching cycles, ensuring high operational reliability in demanding applications.

Instantaneous switching means that the contacts react immediately after the contactor is triggered or switched off, without any delay. This is critical in systems where precise timing of switching operations is required. The non-overlap time is 1.5 ms, both during energizing and de-energizing, ensuring that opening and closing contacts are not active simultaneously, thus preventing short circuits.

Rated operational voltage is 690 V AC in the frequency range of 25 to 400 Hz. The rated insulation voltage corresponds to 690 V according to IEC 60947-5-1, 600 V according to UL and CSA. The rated operational current is 6 A at 120 V AC-15, 1.04 A at 690 V AC-15, 0.55 A at 125 V DC-13, and 0.1 A at 600 V DC-13. The conventional thermal current is 10 A at an ambient temperature of 60 °C. The permissible short-time performance is 100 A at 60 °C for 1 second, 120 A for 500 ms, and 140 A for 100 ms.

Protection class IP2x according to IEC 60529 protects against finger contact and solid foreign objects, but not against water. The operating temperature ranges from -5 °C to 60 °C, and the storage temperature ranges from -60 °C to 80 °C. The maximum operating altitude is 3,000 m above sea level. The insulation resistance values exceed 10 MΩ, ensuring high electrical safety.

Compatibility is provided with the mentioned contactor series from the TeSys family. Mounting is done on the front, and the block is snap-fit, enabling easy and secure fastening. The device color is dark gray, and the dimensions are 48 mm height, 44 mm width, and 42 mm depth. The product weight is 0.05 kg. Conformity with standards includes EN/IEC 60947-5-1, GB/T 14048.5, EN 50012, UL 60947-5-1, CSA C22.2 No. 60947-5-1, IEC 60335-1:Clause 30.2, IEC 60335-2-40:Annex JJ, and UL 60335-2-40:Annex JJ. Certifications include CB Scheme, UL, CSA, CCC, and EAC.

Operational advantages include high switching life, secure terminal connection, and easy mounting. The instantaneous switching enables precise control sequences, while the high insulation strength and robust construction ensure reliability in industrial environments. The compatibility with various contactor types offers flexibility in system design.

Accessory items that can be combined with the LADN31 include various contactors from the TeSys series, such as LC1D25F7, LC1D115R7, LC1D40008F7, LC1DT40U7, LC1D150Q7, LC1D09B7, LC1D80D7, LC1DT25BL, LC1D12U7, LC1D098P7, LC1D25B7TQ, LC1D12B7, LC1D188D7, LC1D32S7, and LC1D09MD, as well as auxiliary contactors such as CAD32P7TQ, CAD32B7, CAD50B7, and CAD32X7. These components allow adaptation to different power and control requirements.

The minimum switching voltage is 17 V, and the minimum switching current is 5 mA, enabling use even with low-level signals. The rated make capacity is 140 A AC and 250 A DC according to IEC 60947-5-1. The coating corresponds to category TH according to IEC 60068, ensuring resistance to environmental influences.

The auxiliary switch block is designed for normal environmental conditions and is suitable for industrial applications in automation technology, machine building, and manufacturing technology. It is used in control systems where additional switching contacts are required for signals, feedback, or safety functions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/424404
qrcode für Schneider Electric LADN31 Auxiliary Switch Block 3S1Ö front