| Complementary |
| Irms rated making capacity | 140 A AC conforming to IEC 60947-5-1; 250 A DC conforming to IEC 60947-5-1 |
| Permissible short-time rating | 100 A 60 °C 1 s; 120 A 60 °C 500 ms; 140 A 60 °C 100 ms |
| Protection type | GG fuse 10 A |
| Mechanical durability | 30 Mcycles |
| Minimum switching current | 5 mA |
| Minimum switching voltage | 17 V |
| Non-overlap time | 1.5 ms on de-energisation no overlap between NC and NO contact; 1.5 ms on energisation no overlap between NC and NO contact |
| Insulation resistance | > 10 MOhm |
| Connections - terminals | Lugs-ring terminals (external diameter: 8 mm) |
| Tightening torque | 1.7 N.m - with screwdriver flat Ø 6 mm M3.5; 1.7 N.m - with screwdriver Philips No 2 M3.5; 1.7 N.m - with screwdriver pozidriv No 2 M3.5 |
| Height | 48 mm |
| Width | 26 mm |
| Depth | 42 mm |
| Colour | Dark grey |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Environmental characteristic | Normal environment |
| IP degree of protection | IP20 conforming to IEC 60529 |
| Protective treatment | TH conforming to IEC 60068 |
| Ambient air temperature for storage | -60…80 °C |
| Ambient air temperature for operation | -5…60 °C |
| Operating altitude | 3000 m |
| Logistical informations |
| Country of origin | FR |
| Main |
| Range | TeSys; TeSys Deca |
| Product name | TeSys Deca |
| Product or component type | Auxiliary contact block |
| Device short name | LADN |
| Range compatibility | TeSys D CAD; TeSys D LC1D; TeSys F LC1F; TeSys F CR1F; TeSys Deca CAD; TeSys Deca LC1D |
| Mounting location | Front |
| Pole contact composition | 2 NO |
| Contacts operation | Instantaneous |
| [Ue] rated operational voltage | 690 V AC 25...400 Hz |
| [Ie] rated operational current | 6 A at 120 V AC-15; 1.04 A at 690 V AC-15; 0.55 A at 125 V DC-13; 0.1 A at 600 V DC-13 |
| [Ui] rated insulation voltage | 690 V conforming to IEC 60947-5-1; 600 V conforming to UL; 600 V conforming to CSA |
| [Ith] conventional free air thermal current | 10 A (at 60 °C) |
| Standards | EN/IEC 60947-5-1; GB/T 14048.5; EN 50012; UL 60947-5-1; CSA C22.2 No 60947-5-1; IEC 60335-1:Clause 30.2; IEC 60335-2-40:Annex JJ; UL 60335-2-40:Annex JJ |
| Product certifications | CB Scheme; UL; CSA; CCC; EAC; UKCA |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 5.000 cm |
| Package 1 Width | 3.000 cm |
| Package 1 Length | 4.200 cm |
| Package 1 Weight | 33.000 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 160 |
| Package 2 Height | 15.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 5.527 kg |
The auxiliary switch block LADN206 from Schneider Electric belongs to the TeSys Deca series and serves as an undelayed auxiliary contact block for power contactors of types LC1D, LC1F, and series TeSys D CAD, TeSys Deca CAD, and TeSys F CR1F. It is specifically designed for front mounting on contactors and enables the expansion of control functions through additional switching contacts. The block features two closing contacts (2S), which are used for transmitting control signals in industrial installations.
Applications
The auxiliary switch block is used in industrial control systems where additional switching functions such as feedback of contactor positions, signal transmission to other components, or control of auxiliary devices are required. It is suitable for applications in automation technology, machine building, and manufacturing technology, where reliable and fast signal transmission is necessary. Mounting is done directly on the front side of the contactor, ensuring compact and secure integration into existing control systems.
Functions and Equipment in Detail
The block provides two undelayed closing contacts that close immediately upon actuation of the contactor. The contacts are rated for an operating voltage up to 690 V AC and can carry an operating current of 6 A at 120 V AC-15. At higher voltages such as 690 V AC-15, the permissible current is 1.04 A. For direct current systems, the values are 0.55 A at 125 V DC-13 and 0.1 A at 600 V DC-13. The mechanical life expectancy is 30 million switching cycles, ensuring high operational reliability in demanding environments. The minimum switching voltage is 17 V, and the minimum switching current is 5 mA, enabling use even with weak signals.
Technology Explained Simply
The contacts are designed as ring terminal lugs, allowing secure and durable cable connections with an outer diameter of 8 mm. The tightening torque is 1.7 Nm, and mounting can be done using a flat screwdriver (Ø 6 M3.5), a Phillips screwdriver (No. 2 M3.5), or a positioning screwdriver (No. 2 M3.5). The protection rating IP20 according to IEC 60529 protects against finger contact and against entry of solid foreign objects larger than 12.5 mm, but not against water. The operating temperature ranges from -5 °C to 60 °C, and the storage temperature ranges from -60 °C to 80 °C. The maximum operating altitude is 3,000 m above sea level.
Compatibility and Accessories
The auxiliary switch block is compatible with various contactor types from the TeSys and TeSys Deca series, including LC1D, LC1F, CAD, and CR1F. It can be combined with power contactors such as LC1D186B7, LC1D126F7, LC1D386F7, LC1D256F7, LC1D1506U7, LC1D126BL, LC1D096MD, LC1D1156F5, LC1D1506B7, LC1D1156MD, LC1D1506FD, LC1D326B7, LC1D1506MD, LC1D40A6P7, LC1D126B7, LC1D096BL, LC1D326FD, and CAD326GD. Using it with these contactors enables flexible expansion of control functions in industrial installations.
Mounting and Installation
Mounting is done via a clip-on system on the front side of the contactor, allowing quick and secure fastening without additional tools. Cable connections are made via ring terminal lugs, which are tightened to a torque of 1.7 Nm. The dimensions of the block are 48 mm height, 26 mm width, and 42 mm depth. The color is dark gray, providing good visibility in control panels.
Advantages in Operation
The auxiliary switch block offers high reliability with a mechanical life of 30 million switching cycles and a robust construction. The undelayed switching function ensures precise signal transmission. Certification according to EN/IEC 60947-5-1, UL, CSA, CCC, EAC, and UKCA, as well as compliance with RoHS/REACH, ensures adherence to international safety and environmental standards. The IP20 protection rating and operating temperature range of -5 to 60 °C make the block suitable for use in industrial environments. Compatibility with various contactor types increases flexibility in system design.
Standards and Certifications
The auxiliary switch block complies with standards EN/IEC 60947-5-1, GB/T 14048.5, EN 50012, UL 60947-5-1, CSA C22.2 No. 60947-5-1, IEC 60335-1:Clause 30.2, IEC 60335-2-40:Annex JJ, and UL 60335-2-40:Annex JJ. Product certifications include CB Scheme, UL, CSA, CCC, EAC, and UKCA. The rated insulation voltage is 690 V according to IEC 60947-5-1, 600 V according to UL, and 600 V according to CSA. Insulation resistances exceed 10 MΩ, ensuring high electrical safety. The coating corresponds to category TH according to IEC 60068, ensuring resistance to environmental influences.