Schneider Electric LADN11, EAN: 3389110383836

Schneider Electric LADN11 auxiliary switch block 1S1Ö front

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LADN11 auxiliary switch block 1S1Ö front

Lieske Part No. 813683
Mfg Part No LADN11
EAN-Code 3389110383836
Manufacturer Schneider Electric
Here only 11,11 EUR
13,22 EUR incl. VAT

Further information for Schneider Electric LADN11 auxiliary switch block 1S1Ö front

Complementary
Irms rated making capacity140 A AC conforming to IEC 60947-5-1; 250 A DC conforming to IEC 60947-5-1
Permissible short-time rating100 A 60 °C 1 s; 120 A 60 °C 500 ms; 140 A 60 °C 100 ms
Protection typeGG fuse 10 A
Mechanical durability30 Mcycles
Minimum switching current5 mA
Minimum switching voltage17 V
Non-overlap time1.5 ms on de-energisation no overlap between NC and NO contact; 1.5 ms on energisation no overlap between NC and NO contact
Insulation resistance> 10 MOhm
Connections - terminalsScrew clamp terminals 1 cable(s) 1…4 mm²flexible with cable end; Screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end; Screw clamp terminals 1 cable(s) 1…4 mm²rigid without cable end; Screw clamp terminals 2 cable(s) 1…4 mm²rigid without cable end
Tightening torque1.7 N.m - with screwdriver flat Ø 6 mm; 1.7 N.m - with screwdriver Philips No 2; 1.7 N.m - with screwdriver pozidriv No 2
Height48 mm
Width26 mm
Depth42 mm
ColourDark grey
Contractual warranty
Warranty (in months)18
Environment
Environmental characteristicNormal environment
IP degree of protectionIP20 conforming to IEC 60529
Protective treatmentTH conforming to IEC 60068
Ambient air temperature for storage-60…80 °C
Ambient air temperature for operation-5…60 °C
Operating altitude3000 m
Logistical informations
Country of originFR
Main
RangeTeSys; TeSys Deca
Product nameTeSys Deca
Product or component typeAuxiliary contact block
Device short nameLADN
Range compatibilityTeSys D CAD; TeSys D LC1D; TeSys F LC1F; TeSys F CR1F; TeSys Deca CAD; TeSys Deca LC1D
Mounting locationFront
Pole contact composition1 NO + 1 NC
Contacts operationInstantaneous
[Ue] rated operational voltage690 V AC 25...400 Hz
[Ie] rated operational current6 A at 120 V AC-15; 1.04 A at 690 V AC-15; 0.55 A at 125 V DC-13; 0.1 A at 600 V DC-13
[Ui] rated insulation voltage690 V conforming to IEC 60947-5-1; 600 V conforming to UL; 600 V conforming to CSA
[Ith] conventional free air thermal current10 A (at 60 °C)
StandardsEN/IEC 60947-5-1; GB/T 14048.5; EN 50012; UL 60947-5-1; CSA C22.2 No 60947-5-1; IEC 60335-1:Clause 30.2; IEC 60335-2-40:Annex JJ; UL 60335-2-40:Annex JJ
Product certificationsCB Scheme; UL; CSA; CCC; EAC; UKCA
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height3 cm
Package 1 Width4.2 cm
Package 1 Length5.3 cm
Package 1 Weight34 g
Unit Type of Package 2S03
Number of Units in Package 2320
Package 2 Height30 cm
Package 2 Width30 cm
Package 2 Length40 cm
Package 2 Weight11.452 kg
Unit Type of Package 3P06
Number of Units in Package 32560
Package 3 Height75 cm
Package 3 Width60 cm
Package 3 Length80 cm
Package 3 Weight99 kg
The auxiliary switch block LADN11 from Schneider Electric belongs to the TeSys Deca series and serves as an additional component for power contactors of the series TeSys D CAD, TeSys D LC1D, TeSys F LC1F, TeSys F CR1F, TeSys Deca CAD and TeSys Deca LC1D. It is designed as an auxiliary switch block and enables the integration of additional switching functions into existing control systems. The component is mounted front-side and features screw terminals for connection to cables. The contact configuration consists of 1 normally closed (S) and 1 normally open (O), with switching operations occurring instantaneously. This ensures precise and time-accurate signal transmission in control and protection circuits.

Applications include expanding control circuits in industrial plants, where additional signals are required for status indication, feedback to control devices, or linking multiple switching operations. The auxiliary switch block is designed for use in normal environmental conditions and is suitable for applications in manufacturing automation, machine building, and drive technology. Mounting is directly on the front side of the main power contactor, ensuring a compact and clear installation.

Functions and equipment in detail include a robust construction with an insulation resistance of over 10 MΩ, ensuring high electrical safety and reliability for signal transmission. The contacts are rated for a mechanical life of 30 million switching cycles, enabling long operational life even under heavy loads. The minimum switching voltage is 17 V, and the minimum switching current is 5 mA, allowing use even with weak control signals. The non-overlapping time is 1.5 ms, regardless of whether the switch is actuated on the energizing or de-energizing side, ensuring safe separation of switching operations.

Technology explained simply shows that the auxiliary switch block is designed for an operating voltage up to 690 V AC (25–400 Hz). The rated voltage is thus suitable for a wide range of industrial applications. The rated voltage for direct current is 600 V DC, enabling use in DC systems. The rated current values vary depending on voltage: 6 A at 120 V AC-15, 1.04 A at 690 V AC-15, 0.55 A at 125 V DC-13, and 0.1 A at 600 V DC-13. The conventional thermal current is 10 A at 60 °C, describing the thermal load capacity in free air. The permissible short-time performance is 100 A for 1 second, 120 A for 500 ms, and 140 A for 100 ms at 60 °C, defining the short-term load capacity under transient loads. The rated make capacity is 140 A AC and 250 A DC according to IEC 60947-5-1.

Compatibility and accessories include use with the mentioned TeSys contactor series. Combining with other auxiliary switch blocks or power contactors from the TeSys portfolio enables flexible adaptation to different switching requirements. The screw terminals support various cable types: flexible cables with and without cable ends in cross-section 1…4 mm², as well as two flexible cables in cross-section 1…2.5 mm², and rigid cables in cross-section 1…4 mm². The tightening torque is 1.7 Nm, and mounting can be done with a flat screwdriver Ø 6, a Phillips screwdriver No. 2, or a positioning screwdriver No. 2.

Mounting and installation is done by front-side snap-on to the main power contactor. Dimensions are 48 mm height, 26 mm width, and 42 mm depth, allowing the block to fit in standardized enclosures. The color is dark gray, contributing to visual harmonization in industrial control systems. The protection rating IP20 according to IEC 60529 protects against finger contact and ingress of solid foreign objects larger than 12.5 mm, but not against water or dust. The operating ambient temperature ranges from -5 °C to 60 °C, and storage is possible from -60 °C to 80 °C. The maximum operating altitude is 3,000 m above sea level.

Operational advantages lie in high reliability, long service life, and easy mounting. The instantaneous switching function ensures precise signal transmission, and the high insulation strength increases safety. Compatibility with various TeSys contactor series enables flexible system expansion. Certifications according to EN/IEC 60947-5-1, UL, CSA, CCC, EAC, and UKCA confirm compliance with international safety and quality standards. The product certifications include CB regulation, UL, CSA, CCC, EAC, and UKCA, ensuring worldwide usability.

The standards include EN/IEC 60947-5-1, GB/T 14048.5, EN 50012, UL 60947-5-1, CSA C22.2 No. 60947-5-1, IEC 60335-1:Clause 30.2, IEC 60335-2-40:Annex JJ, and UL 60335-2-40:Annex JJ. The rated insulation voltage is 690 V according to IEC 60947-5-1, 600 V according to UL, and 600 V according to CSA. The coating corresponds to TH according to IEC 60068, ensuring environmental resistance under normal conditions. The warranty is 18 months.

The auxiliary switch block LADN11 is thus a reliable and compatible component for expanding control and protection circuits in industrial plants. The combination of robust design, long service life, and international certification makes it a suitable choice for demanding applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/813683
qrcode für Schneider Electric LADN11 auxiliary switch block 1S1Ö front