Schneider Electric LAD8N11, EAN: 3389110384673

Schneider Electric LAD8N11 Auxiliary Switch Block 1S+1Ö Side

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LAD8N11 Auxiliary Switch Block 1S+1Ö Side

Lieske Part No. 680652
Mfg Part No LAD8N11
EAN-Code 3389110384673
Manufacturer Schneider Electric
Here only 16,53 EUR
19,67 EUR incl. VAT

Further information for Schneider Electric LAD8N11 Auxiliary Switch Block 1S+1Ö Side

Complementary
Irms rated making capacity140 A AC conforming to IEC 60947-5-1; 250 A DC conforming to IEC 60947-5-1
Permissible short-time rating100 A 1 s; 120 A 500 ms; 140 A 100 ms
Protection typeGG fuse 10 A
Mechanical durability30 Mcycles
Minimum switching current5 mA
Minimum switching voltage17 V
Non-overlap time1.5 ms on de-energisation no overlap between NC and NO contact; 1.5 ms on energisation no overlap between NC and NO contact
Insulation resistance> 10 MOhm
Connections - terminalsScrew clamp terminals 1 cable(s) 1…4 mm²flexible with cable end; Screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end; Screw clamp terminals 1 cable(s) 1…4 mm²rigid without cable end; Screw clamp terminals 2 cable(s) 1…4 mm²rigid without cable end
Tightening torque1.7 N.m - with screwdriver flat Ø 6 mm; 1.7 N.m - with screwdriver Philips No 2; 1.7 N.m - with screwdriver pozidriv No 2
Height72 mm
Width12.5 mm
Depth71.3 mm
Contractual warranty
Warranty (in months)18
Environment
Environmental characteristicNormal environment
IP degree of protectionIP20 conforming to IEC 60529
Protective treatmentTH conforming to IEC 60068
Ambient air temperature for storage-60…80 °C
Ambient air temperature for operation-5…60 °C
Operating altitude3000 m
Logistical informations
Country of originID
Main
RangeTeSys
Product nameTeSys Deca
Product or component typeAuxiliary contact block
Range compatibilityTeSys Deca LC1D09…95 AC coil; TeSys Deca LC1D115/150; TeSys Deca LC1D40A…80A AC Coil; TeSys Deca CAD AC coil; TeSys F LC1F
Mounting locationSide
Pole contact composition1 NO + 1 NC
Contacts operationInstantaneous
[Ue] rated operational voltage690 V AC 25...400 Hz
[Ie] rated operational current6 A at 120 V AC-15; 1.04 A at 690 V AC-15; 0.55 A at 125 V DC-13; 0.1 A at 600 V DC-13
[Ui] rated insulation voltage690 V conforming to IEC 60947-5-1; 600 V conforming to UL; 600 V conforming to CSA
[Ith] conventional free air thermal current10 A (at 60 °C)
StandardsEN/IEC 60947-5-1; UL 60947-5-1; CSA C22.2 No 60947-5-1; IEC 60335-1:Clause 30.2; IEC 60335-2-40:Annex JJ; UL 60335-2-40:Annex JJ
Product certificationsCB Scheme; UL; CSA; CCC; EAC; UKCA
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height2.900 cm
Package 1 Width7.300 cm
Package 1 Length8.100 cm
Package 1 Weight60.000 g
Unit Type of Package 2S02
Number of Units in Package 260
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight4.124 kg
Unit Type of Package 3P06
Number of Units in Package 3960
Package 3 Height75.000 cm
Package 3 Width60.000 cm
Package 3 Length80.000 cm
Package 3 Weight79.000 kg
The auxiliary switch block LAD8N11 from the TeSys Deca series by Schneider Electric is an instantaneous auxiliary contact module designed specifically for side mounting on power contactors of the TeSys Deca and TeSys F series. It serves to extend the switching functions of main contacts, for example for signal transmission, controlling additional components, or providing feedback on the switching state in control and switching systems. The block features a configuration of 1 normally open contact (S) and 1 normally closed contact (Ö), which switch instantaneously, i.e. without time delay. The contacts are rated for an operating voltage of 690 V AC at frequencies from 25 to 400 Hz and comply with the standards EN/IEC 60947-5-1, UL 60947-5-1, and CSA C22.2 No. 60947-5-1. The rated insulation voltage is 690 V according to IEC 60947-5-1, 600 V according to UL and CSA, enabling use in industrial applications with high voltages.

Applications
This auxiliary switch block is intended for use in industrial control and switching systems, particularly in combination with power contactors of types LC1D09 to LC1D95, LC1D115/150, LC1D40A to LC1D80A, CAD AC coils, and LC1F. It is mounted on the side of the main contact and serves to extend control functions, for example for actuating auxiliary relays, signalling operating states, or providing feedback to higher-level control devices. Mounting is front-side snap-in, enabling quick and secure installation.

Functions and Features in Detail
The block is equipped with screw terminals suitable for connecting flexible and rigid cables with cross-sections from 1 to 4 mm². The terminals support cables with or without wire end ferrules and allow connection of one or two cables per terminal. The required tightening torque is 1.7 Nm, and mounting can be done with a flat-head screwdriver (Ø 6 mm), a Phillips screwdriver No. 2, or a positioning screwdriver No. 2. The mechanical life is 30 million switching cycles, ensuring high reliability in industrial applications. The minimum switching voltage is 17 V, and the minimum switching current is 5 mA, enabling use even with weak signals.

Technology Explained Simply
The contacts switch instantaneously, meaning that the normally closed and normally open contacts change position immediately upon actuation of the main contact, without any time delay. The non-overlapping time is 1.5 ms, regardless of whether the contact is actuated by control or release. This prevents brief short circuits between contacts. The insulation resistance is greater than 10 MΩ, ensuring high electrical insulation and safety. The permissible short-time current is 100 A for 1 second, 120 A for 500 ms, and 140 A for 100 ms, ensuring load capacity during transient current surges. The conventional thermal current is 10 A at 60 °C, describing the thermal load capacity in free air.

Compatibility and Accessories
The auxiliary switch block is compatible with a wide range of power contactors from the TeSys Deca and TeSys F series, including models such as LC1D09, LC1D95, LC1D115/150, LC1D40A–80A, CAD AC coils, and LC1F. It can be combined with various power contactors to increase the number of available auxiliary contacts. Suitable accessory products include, for example, power contactors LC1D40008F7, LC1D115R7, LC1D150Q7, LC1D150GD, LC1DT25JD, LC1DT25BL, LC1D32C7, LC1DT40ED, LC1D09B7, LC1DT40U7, LC1D25F7, LC1D12U7, LC1D32EHE, CAD50B7, LC1D115Q7, LC1D50AE7, CAD50P7TQ, LC1D95G7, and LC1D80FW. These can be combined with the auxiliary switch block according to application requirements.

Mounting and Installation
Mounting is done on the side of the main contact, with the block front-side snap-in. The screw terminals enable secure and durable connection of the wiring. Dimensions are 72 mm height, 12.5 mm width, and 71.3 mm depth, allowing compact integration into existing switching systems. The operating temperature range is -5 °C to 60 °C, and the storage temperature range is -60 °C to 80 °C. The operating altitude is up to 3,000 m above sea level. The protection rating IP20 according to IEC 60529 protects against finger contact and larger solid objects, but is not suitable for outdoor use or in damp environments. The coating corresponds to category TH according to IEC 60068, ensuring high resistance to environmental influences.

Operational Advantages
The auxiliary switch block offers high mechanical life, secure and reliable switching, and easy mounting. The use of screw terminals enables flexible and robust connections. Compatibility with a wide range of power contactors in the TeSys series simplifies integration into existing systems. Compliance with international standards and certifications such as CB, UL, CSA, CCC, EAC, and UKCA ensures usability in various markets. The high insulation performance and defined non-overlapping time increase the safety and reliability of the switching system.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/680652
qrcode für Schneider Electric LAD8N11 Auxiliary Switch Block 1S+1Ö Side