| Complementary |
| Mounting location | Front side |
| Mounting mode | Clip-on |
| Suppressor technology | Varistor (peak limiting) |
| [Uc] control circuit voltage | 130...250 V AC; 130...250 V DC |
| Maximum peak voltage | 2 Uc |
| Local signalling | LED |
| Quantity per set | Set of 5 |
| Height | 26 mm |
| Width | 6 mm |
| Depth | 22 mm |
| Net weight | 0.01 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | UL 60947-5-1; CSA C22.2 No 60947-5-1; EN/IEC 60947-5-1 |
| Product certifications | UL; CSA; CE; UKCA |
| IP degree of protection | IP2X conforming to IEC 60529 |
| Protective treatment | TC conforming to IEC 60068; TC conforming to DIN 50016 |
| Ambient air temperature for operation | -25…50 °C |
| Ambient air temperature for storage | -50…80 °C |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range | TeSys |
| Device short name | LA4K |
| Product or component type | Suppressor module |
| Product compatibility | LC1K; LP1K; LP4K; CA2K; CA3K |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 0.500 cm |
| Package 1 Width | 2.700 cm |
| Package 1 Length | 3.700 cm |
| Package 1 Weight | 5.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 5 |
| Package 2 Height | 2.800 cm |
| Package 2 Width | 5.200 cm |
| Package 2 Length | 4.200 cm |
| Package 2 Weight | 29.000 g |
| Unit Type of Package 3 | S01 |
| Number of Units in Package 3 | 420 |
| Package 3 Height | 15.000 cm |
| Package 3 Width | 15.000 cm |
| Package 3 Length | 40.000 cm |
| Package 3 Weight | 2.782 kg |
The surge protection module LA4KE1UG from Schneider Electric belongs to the TeSys series and serves as an
overvoltage limiter for control circuits in electrical installations. It is specifically designed for mounting on contactors and auxiliary contactors of types LC1K, LP1K, LP4K, CA2K, and CA3K. The module is
plug-on installed on the
front side of the device and serves to
limit overvoltages in the control circuit, protecting sensitive electronic components from transient voltage spikes. The function is based on
varistor technology, which performs amplitude limitation, restricting the voltage to a maximum of 2 times the rated voltage (2 Uc). The control circuit voltage is 130 to 250 V AC or 130 to 250 V DC. The
trip delay is between 1.1 and 1.5 times the normal time, enabling a rapid response to voltage spikes.
Applications include integration into industrial control systems, where sudden voltage spikes may occur due to switching operations or external influences. The module is particularly suitable for installations where the reliability of control circuits is critical, such as in manufacturing automation or systems with frequency-controlled drives.
Local signaling is provided via an LED, which visually indicates the operating status.
Functions and equipment in detail include a compact design with a height of 26 mm, width of 6 mm, and depth of 22 mm. The module weighs 0.01 kg, making it lightweight and space-saving. The
protection rating IP2x according to IEC 60529 protects against contact with fingers and larger solid objects, but not against water or dust. The
protection treatment TC complies with standards IEC 60068 and DIN 50016, ensuring resistance to environmental influences such as temperature fluctuations and mechanical stress. The operating ambient temperature ranges from -25 °C to 50 °C, and the storage temperature ranges from -50 °C to 80 °C.
Technology explained simply shows that the module operates as a
varistor, a nonlinear resistor that suddenly becomes conductive under overvoltage conditions and limits the voltage to a tolerable level. The maximum surge voltage is 2 Uc, meaning the voltage in the event of a fault is limited to double the rated voltage. The LED signaling allows for quick visual inspection of the operating status. Installation is done by plugging on, requiring no additional tools or mounting work.
Compatibility and accessories include use with the specified contactor types from the TeSys series. Compatibility is confirmed for models LC1K, LP1K, LP4K, CA2K, and CA3K. The module can be combined with various contactors, such as LC1K0610P7, LC1K0910P7, or CA2KN31U7, to protect control circuits from overvoltages. The module is used exclusively as an add-on module, plugged onto the front side of the contactors.
Mounting and installation are performed by simply plugging onto the designated contacts of the contactors. Mounting is tool-free and takes place on the front side of the device. Installation requires no additional components or wiring, as the module is directly integrated into the control circuit. The dimensions are designed to fit easily into standardized enclosures.
Advantages in operation include easy mounting, rapid response to overvoltages, and visual signaling via the LED. The use of varistors ensures reliable voltage limitation without additional components. Certifications UL, CSA, CE, and UKCA, along with compliance with standards EN/IEC 60947-5-1, ensure adherence to international safety and quality standards. The warranty is 18 months, underscoring the product’s reliability. The module is available in a packaging unit of 1 piece, with packaging unit 2 (BB1) containing 5 pieces and packaging unit 3 (S01) containing 420 pieces. Packaging dimensions and weights are optimized for transportation and storage.