| Complementary |
| Mounting location | Front side |
| Mounting mode | Clip-on |
| Suppressor technology | Bidirectional peak limiting diode |
| [Uc] control circuit voltage | 12...24 V DC |
| Maximum peak voltage | 2 Uc |
| Local signalling | LED |
| Quantity per set | Set of 5 |
| Height | 26 mm |
| Width | 6 mm |
| Depth | 22 mm |
| Net weight | 0.01 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | UL 60947-5-1; CSA C22.2 No 60947-5-1; EN/IEC 60947-5-1 |
| Product certifications | UL; CSA; CE; UKCA |
| IP degree of protection | IP2X conforming to IEC 60529 |
| Protective treatment | TC conforming to IEC 60068; TC conforming to DIN 50016 |
| Ambient air temperature for operation | -25…50 °C |
| Ambient air temperature for storage | -50…80 °C |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range | TeSys |
| Device short name | LA4K |
| Product or component type | Suppressor module |
| Product compatibility | LP1K; LP4K; CA3K |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 0.800 cm |
| Package 1 Width | 2.800 cm |
| Package 1 Length | 4.200 cm |
| Package 1 Weight | 4.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 5 |
| Package 2 Height | 2.800 cm |
| Package 2 Width | 5.200 cm |
| Package 2 Length | 4.300 cm |
| Package 2 Weight | 28.000 g |
| Unit Type of Package 3 | S01 |
| Number of Units in Package 3 | 420 |
| Package 3 Height | 15.000 cm |
| Package 3 Width | 15.000 cm |
| Package 3 Length | 40.000 cm |
| Package 3 Weight | 2.657 kg |
The
surge suppression module LA4KC1B from
Schneider Electric belongs to the
TeSys series and serves as an
overvoltage limiter for control circuits. It is specifically designed for use with small contactors of types LP1K, LP4K, and CA3K to suppress electrical interference and voltage spikes in the control circuit. The module is mounted by clipping onto the front of the contactor and is thus directly integrated into the existing control system. The
bidirectional amplitude limiter diode ensures that voltage spikes, which can reach up to twice the control circuit voltage (2 Uc), are diverted to protect sensitive control components.
Applications
This surge suppression module is intended for industrial applications where electrical interference may occur due to switching operations or external influences. It is particularly used in systems with frequent switching operations, such as motor drives, pumps, or fans, to enhance the reliability of control systems. Compatibility with contactor types LP1K, LP4K, and CA3K allows for flexible use in various switching configurations.
Functions and Features in Detail
The module operates with a control circuit voltage of
12 to 24 V DC and is thus suitable for common low-voltage control systems. Local signaling is provided by an
LED, which visually indicates the operating status. Mounting is done by clipping onto the front of the contactor, requiring no additional drilling or mounting aids. The compact design, with a height of 26 mm, width of 6 mm, and depth of 22 mm, allows for space-saving installation.
Technology Explained Simply
The
bidirectional amplitude limiter diode responds to voltage spikes in both directions and limits them to a safe level. This protects control electronics from damage caused by transient overvoltages, which may occur during switching operations or due to external interference sources. The maximum peak voltage the module can handle is twice the control circuit voltage (2 Uc), providing sufficient protection for typical applications. The LED signaling allows for quick visual inspection of the operating status without requiring additional measuring instruments.
Compatibility and Accessories
The surge suppression module LA4KC1B is specifically designed for use with contactor types LP1K, LP4K, and CA3K. It can be combined with various power contactors and auxiliary contactors from the TeSys-K series, such as LP1K090045BD, LP1K0901JD, or CA3KN313BD. Combining it with these contactors enables optimal protection for control circuits in industrial installations.
Mounting and Installation
Mounting is simple and quick, achieved by clipping onto the front of the contactor. No additional tools or mounting aids are required. Front-side mounting allows direct integration into existing control systems without additional space requirements. The protection rating IP2x according to IEC 60529 provides protection against contact with fingers and larger objects, but not against dust or water. The operating ambient temperature ranges from -25 °C to 50 °C, enabling use in typical industrial environments.
Operational Advantages
The integrated overvoltage limitation extends the service life of control electronics and increases operational safety. The LED signaling enables quick fault diagnosis. The compact design and easy mounting reduce installation time and costs. Certifications including UL, CSA, CE, and UKCA, along with compliance with EN/IEC 60947-5-1 standards, ensure safe and reliable performance in various markets. The protection treatment TC according to IEC 60068 and DIN 50016 ensures long-term stability of the module under industrial conditions.