Schneider Electric LA1KN40, EAN: 3389110500073

Schneider Electric LA1KN40 Auxiliary Switch Block 4 NO

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LA1KN40 Auxiliary Switch Block 4 NO

Lieske Part No. 132374
Mfg Part No LA1KN40
EAN-Code 3389110500073
Manufacturer Schneider Electric
Here only 18,71 EUR
22,26 EUR incl. VAT

Further information for Schneider Electric LA1KN40 Auxiliary Switch Block 4 NO

Complementary
Irms rated making capacity110 A at
Permissible short-time rating80 A 1 s; 60 A 500 ms; 110 A 100 ms
Associated fuse rating10 A gG at
Minimum switching current5 mA
Minimum switching voltage17 V
Non overlap distance0.5 mm
Insulation resistance> 10 MOhm
Connections - terminalsScrew clamp terminals 1 cable(s) 0.34…1.5 mm²flexible with cable end; Screw clamp terminals 1 cable(s) 0.75…4 mm²flexible without cable end; Screw clamp terminals 1 cable(s) 1.5…4 mm²rigid; Screw clamp terminals 2 cable(s) 0.34…1.5 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 0.75…4 mm²flexible without cable end; Screw clamp terminals 2 cable(s) 1.5…4 mm²rigid
Tightening torque1.3 N.m - with screwdriver Philips No 2; 1.3 N.m - with screwdriver pozidriv No 2
Height30 mm
Width38 mm
Depth35 mm
Net weight0.045 kg
Contractual warranty
Warranty (in months)18
Environment
Environmental characteristicNormal environment
IP degree of protectionIP20 conforming to IEC 60529
Protective treatmentTC conforming to IEC 60068
Ambient air temperature for storage-50…80 °C
Ambient air temperature for operation-25…50 °C
Operating altitude2000 m
Logistical informations
Country of originID
Main
RangeTeSys
Product nameTeSys K
Product or component typeAuxiliary contact block
Device short nameLA1
Range compatibilityTeSys K LC1K; TeSys K CA2K; TeSys K CA3K
Mounting locationFront
Pole contact composition4 NO
Contacts operationInstantaneous
[Ue] rated operational voltage690 V AC 25...400 Hz
[Ui] rated insulation voltage690 V conforming to IEC 60947-5-1; 600 V conforming to UL 60947-5-1; 600 V conforming to CSA C22.2 No 60947-5-1
[Ith] conventional free air thermal current10 A (at 50 °C)
StandardsEN/IEC 60947-5-1; UL 60947-5-1; CSA C22.2 No 60947-5-1; GB/T 14048.5; JIS C8201-5-1; UL 60335-2-40:Annex JJ
Product certificationsCB Scheme; CCC; UL; CSA; CE; UKCA
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height3.700 cm
Package 1 Width4.000 cm
Package 1 Length4.000 cm
Package 1 Weight40.000 g
Unit Type of Package 2BB1
Number of Units in Package 210
Package 2 Height5.000 cm
Package 2 Width17.000 cm
Package 2 Length17.000 cm
Package 2 Weight401.000 g
Unit Type of Package 3S02
Number of Units in Package 3100
Package 3 Height15.000 cm
Package 3 Width30.000 cm
Package 3 Length40.000 cm
Package 3 Weight4.500 kg
The auxiliary switch block LA1KN40 from the TeSys series by Schneider Electric is an undelayed auxiliary switch module specifically designed for mounting on the front side of power contactors from the TeSys K series (LC1K, CA2K, CA3K). It serves as an additional switching contact to transmit signals in control and switching installations, for example, to indicate the switching state or to control other components. The device features four normally closed contacts (4 S) and is equipped with screw terminals that enable a secure and reliable connection to cables with a cross-section of 0.34 to 4 mm², supporting both flexible cables with wire end ferrules or without, as well as rigidly installed conductors. Mounting is front-side and snap-in, allowing for easy installation without tools.

Applications

The auxiliary switch block LA1KN40 is used in industrial control systems and switching installations where additional switching contacts are required for signal transmission. It is particularly suitable for applications in automation technology, such as in manufacturing, packaging technology, or building automation. The device is used in combination with power contactors from the TeSys K series, with signals transmitted via the 4 normally closed contacts. The operating voltage is up to 690 V AC in the range of 25 to 400 Hz, enabling use in industrial networks with high voltages.

Functions and Equipment in Detail

The auxiliary switch block is designed to be undelayed, meaning the contacts switch immediately upon actuation of the main contact, without any delay. The screw terminals allow for a secure connection to cables of various cross-sections, with a tightening torque of 1.3 Nm required, to be achieved using a Phillips screwdriver No. 2 or position No. 2. The contacts are rated for a conventional thermal current of 10 A at 50 °C, ensuring reliable performance in typical industrial environments. The minimum switching voltage is 17 V, and the minimum switching current is 5 mA, ensuring reliability even under low-load conditions.

Technology Explained Simply

The insulation resistance exceeds 10 MΩ, ensuring high electrical insulation and thus secure isolation of the contacts. The rated insulation voltage is 690 V according to IEC 60947-5-1, enabling use in high-voltage installations. The permissible short-time current is 80 A for 1 second, 60 A for 500 ms, and 110 A for 100 ms, ensuring reliability under short-term current surges. The associated fuse is specified as 10 A gG to ensure safety in case of faults. The protection rating IP20 corresponds to IEC 60529 and protects against finger contact, but not against dust or water, requiring use within enclosed enclosures.

Compatibility and Accessories

The auxiliary switch block LA1KN40 is compatible with power contactors from the TeSys K series, particularly models LC1K, CA2K, and CA3K. It can be combined with various power contactors, such as LC1K0601U7, LC1K0910B7, LC1K0610F7, or LC1K1210F7, to extend control functions. Additionally, auxiliary contactors such as CA3KN40MD3 or CA2KN22U7 are available and can also be integrated into the TeSys K series. Combining with other auxiliary switch blocks enables flexible expansion of switching functions.

Mounting and Installation

Mounting is performed on the front side of the corresponding power contactors from the TeSys K series. The snap-in connection allows for quick and tool-free installation. Dimensions are 38 mm width, 30 mm height, and 35 mm depth, enabling compact placement in enclosures. The operating temperature ranges from -25 °C to 50 °C, with a storage temperature range of -50 °C to 80 °C. The operating altitude is up to 2,000 m above sea level, enabling use in various geographical regions.

Operational Advantages

The auxiliary switch block LA1KN40 provides reliable signal transmission in industrial installations. The undelayed switching ensures precise synchronization with the main contact. The screw terminals allow for flexible and secure connections to various cable types. The high insulation resistance and specified fuse enhance operational safety. Compatibility with the TeSys K series and easy mounting simplify integration into existing installations. Certifications according to EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No. 60947-5-1, GB/T 14048.5, and JIS C8201-5-1, as well as product certifications CB, CCC, UL, CSA, CE, and UKCA, confirm compliance with international standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/132374
qrcode für Schneider Electric LA1KN40 Auxiliary Switch Block 4 NO