Schneider Electric LA1KN13, EAN: 3389110500134

Schneider Electric LA1KN13 auxiliary switch block 1 normally closed 3 normally open

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LA1KN13 auxiliary switch block 1 normally closed 3 normally open

Lieske Part No. 371723
Mfg Part No LA1KN13
EAN-Code 3389110500134
Manufacturer Schneider Electric
Here only 19,47 EUR
23,17 EUR incl. VAT

Further information for Schneider Electric LA1KN13 auxiliary switch block 1 normally closed 3 normally open

Complementary
Irms rated making capacity110 A at
Permissible short-time rating80 A 1 s; 60 A 500 ms; 110 A 100 ms
Associated fuse rating10 A gG at
Minimum switching current5 mA
Minimum switching voltage17 V
Non overlap distance0.5 mm
Insulation resistance> 10 MOhm
Connections - terminalsScrew clamp terminals 1 cable(s) 0.34…1.5 mm²flexible with cable end; Screw clamp terminals 1 cable(s) 0.75…4 mm²flexible without cable end; Screw clamp terminals 1 cable(s) 1.5…4 mm²rigid; Screw clamp terminals 2 cable(s) 0.34…1.5 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 0.75…4 mm²flexible without cable end; Screw clamp terminals 2 cable(s) 1.5…4 mm²rigid
Tightening torque1.3 N.m - with screwdriver Philips No 2; 1.3 N.m - with screwdriver pozidriv No 2
Height30 mm
Width38 mm
Depth35 mm
Net weight0.045 kg
Contractual warranty
Warranty (in months)18
Environment
Environmental characteristicNormal environment
IP degree of protectionIP20 conforming to IEC 60529
Protective treatmentTC conforming to IEC 60068
Ambient air temperature for storage-50…80 °C
Ambient air temperature for operation-25…50 °C
Operating altitude2000 m
Logistical informations
Country of originID
Main
RangeTeSys
Product nameTeSys K
Product or component typeAuxiliary contact block
Device short nameLA1
Range compatibilityTeSys K LC1K; TeSys K CA2K; TeSys K CA3K
Mounting locationFront
Pole contact composition1 NO + 3 NC
Contacts operationInstantaneous
[Ue] rated operational voltage690 V AC 25...400 Hz
[Ui] rated insulation voltage690 V conforming to IEC 60947-5-1; 600 V conforming to UL 60947-5-1; 600 V conforming to CSA C22.2 No 60947-5-1
[Ith] conventional free air thermal current10 A (at 50 °C)
StandardsEN/IEC 60947-5-1; UL 60947-5-1; CSA C22.2 No 60947-5-1; GB/T 14048.5; JIS C8201-5-1; UL 60335-2-40:Annex JJ
Product certificationsCB Scheme; CCC; UL; CSA; CE; UKCA
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height3.500 cm
Package 1 Width3.000 cm
Package 1 Length3.900 cm
Package 1 Weight40.000 g
Unit Type of Package 2BB1
Number of Units in Package 210
Package 2 Height5.000 cm
Package 2 Width16.000 cm
Package 2 Length17.000 cm
Package 2 Weight411.000 g
Unit Type of Package 3S02
Number of Units in Package 3100
Package 3 Height15.000 cm
Package 3 Width30.000 cm
Package 3 Length40.000 cm
Package 3 Weight4.580 kg
The auxiliary switch block LA1KN13 from Schneider Electric belongs to the TeSys K series and serves as an additional component for contactors of this product family. It is specifically designed for mounting on the front side of TeSys K contactors (except LP4K and LP5K) and enables the expansion of switching functions through additional auxiliary contacts. The device features a contact configuration of 1 normally closed and 3 normally open contacts (1S+3Oe), designed for instantaneous switching operations. The rated operational voltage is 690 V AC in the frequency range of 25 to 400 Hz, with the rated insulation voltage also being 690 V (IEC 60947-5-1) and 600 V (UL and CSA). The conventional thermal current in free air is 10 A at an ambient temperature of 50 °C, defining the device's load capacity under normal operating conditions.

Applications

The auxiliary switch block is used in industrial control systems where additional switching functions such as feedback of contactor positions, signal transmission, or interlocking of switching operations are required. It is suitable for applications in automation technology, such as in manufacturing industry, process engineering, or building automation. Compatibility with contactor types LC1K, CA2K, and CA3K of the TeSys K series enables flexible integration into existing installations. Mounting is achieved via a simple snap-on connection to the front of the contactor, ensuring quick installation and maintenance.

Functions and Equipment in Detail

The auxiliary switch block LA1KN13 provides a contact arrangement with 1S+3Oe, where the contacts switch instantaneously. The minimum switching voltage is 17 V, and the minimum switching current is 5 mA, ensuring reliability under low-load conditions. The permissible short-time current is 80 A for 1 second, 60 A for 500 ms, and 110 A for 100 ms, defining the load capacity under transient current surges. The associated fuse is specified as 10 A gG to ensure protection of the switch against overloads. The insulation resistance exceeds 10 MΩ, ensuring high electrical safety.

Technology Explained Simply

The screw terminals allow connection of cables with cross-sections from 0.34 to 4 mm², including flexible cables with cable ends up to 1.5 mm² and without cable ends up to 4 mm², as well as rigid cables from 1.5 to 4 mm². The tightening torque is 1.3 Nm, with mounting using a Phillips screwdriver No. 2 or position No. 2. The protection rating IP20 according to IEC 60529 protects against finger contact and ingress of solid foreign objects larger than 12.5 mm, but not against water. The operating temperature ranges from -25 °C to 50 °C, and the storage temperature can range from -50 °C to 80 °C. The maximum operating altitude is 2,000 m above sea level.

Compatibility and Accessories

The auxiliary switch block is specifically developed for the TeSys K contactor series, including types LC1K, CA2K, and CA3K. It is not compatible with models LP4K and LP5K. As accessories, various contactor models are available, such as LC1K0601P72TQ, LC2K0610P7, CA3KN40BD, LP1K09015BD, LC1K1201B7, LC2K0610B7, LC1K12105P7, CA3KN31JD, LC1K0610B7, LC1K0601E7, LC1K12105B7, LC2K09105P7, LC1K0601N7, LC1K09105P7, LP1K090045BD, LC2K09107B7, CA3KN22ED, LC1K1201D7, LC1K06017P7, LC2K09105E7. These can be combined with the auxiliary switch block to realize complex control tasks.

Mounting and Installation

Mounting is done by snapping onto the front side of the contactor, enabling quick and secure installation without additional tools. The screw terminals allow flexible wiring with various cable cross-sections. The tightening torques are clearly defined to ensure a secure and durable connection. The dimensions of the device are 38 mm (width), 30 mm (height), and 35 mm (depth), allowing it to fit in standardized enclosures. The product weight is 0.045 kg.

Advantages in Operation

The auxiliary switch block LA1KN13 offers high reliability and durability due to robust construction and proven technology. Compliance with international standards such as EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No. 60947-5-1, GB/T 14048.5, JIS C8201-5-1, and UL 60335-2-40:Annex JJ ensures safety and functionality. Certifications including CB Regulation, CCC, UL, CSA, CE, and UKCA confirm compliance with applicable regulations. RoHS/Reach compliance ensures environmental compatibility of the product. The simple mounting and high compatibility with the TeSys K series facilitate integration into existing systems and reduce maintenance time.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/371723
qrcode für Schneider Electric LA1KN13 auxiliary switch block 1 normally closed 3 normally open