Schneider Electric LA1DZ31, EAN: 3389110236521

Schneider Electric LA1DZ31 auxiliary switch block 3S+1Ö front-sealed

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LA1DZ31 auxiliary switch block 3S+1Ö front-sealed

Lieske Part No. 606452
Mfg Part No LA1DZ31
EAN-Code 3389110236521
Manufacturer Schneider Electric
Here only 91,48 EUR
108,86 EUR incl. VAT

Further information for Schneider Electric LA1DZ31 auxiliary switch block 3S+1Ö front-sealed

Complementary
Protection typeGG fuse 10 A for non-protected contact
Mechanical durability5 Mcycles
Minimum switching current1 mA for protected contact; 5 mA for non-protected contact
Minimum switching voltage5 V for protected contact; 17 V for non-protected contact
Insulation resistance> 10 MOhm
Connections - terminalsScrew clamp terminals 1 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 1 cable(s) 1…2.5 mm²flexible without cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible without cable end; Screw clamp terminals 1 cable(s) 1…2.5 mm²rigid; Screw clamp terminals 2 cable(s) 1…2.5 mm²rigid
Tightening torque1.7 N.m - with screwdriver flat Ø 6 mm; 1.7 N.m - with screwdriver Philips No 2; 1.7 N.m - with screwdriver pozidriv No 2
Height48 mm
Width44 mm
Depth39 mm
Contractual warranty
Warranty (in months)18
Environment
Environmental characteristicHarsh environment
IP degree of protectionIP2X conforming to IEC 60529
Protective treatmentTH conforming to IEC 60068
Ambient air temperature for storage-25…70 °C
Ambient air temperature for operation-25…70 °C
Logistical informations
Country of originCZ
Main
RangeTeSys
Product nameTeSys Deca
Product or component typeAuxiliary contact block
Device short nameLA1
Range compatibilityTeSys D CAD; TeSys D LC1D; TeSys F LC1F; TeSys F CR1F; TeSys Deca CAD; TeSys Deca LC1D
Mounting locationFront
Pole contact composition2 NO (sealed) + 1 NO + 1 NC
Contacts operationInstantaneous
[Ue] rated operational voltage125 V AC for protected contact; 30 V DC for protected contact; 690 V AC for non-protected contact
[Ie] rated operational current0.1 A for protected contact
[Ui] rated insulation voltage250 V - for protected contact conforming to IEC 60947-5-1; 690 V - for non-protected contact conforming to IEC 60947-5-1; 600 V - for non-protected contact conforming to UL 60947-5-1; 600 V - for non-protected contact conforming to CSA C22.2 No 60947-5-1
[Ith] conventional free air thermal current10 A (at 40 °C) for non-protected contact
StandardsEN/IEC 60947-5-1; UL 60947-5-1; CSA C22.2 No 60947-5-1; GB/T 14048.5
Product certificationsCB; UL; CSA; CCC; EAC; UKCA
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height4.700 cm
Package 1 Width4.800 cm
Package 1 Length5.200 cm
Package 1 Weight64.000 g
Unit Type of Package 2S02
Number of Units in Package 280
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight5.463 kg
The auxiliary switch block LA1DZ31 from Schneider Electric belongs to the TeSys series and is designed as TeSys Deca. It is an undelayed auxiliary switch block specifically designed for mounting on contactors from the product families TeSys D CAD, TeSys D LC1D, TeSys F LC1F, TeSys F CR1F, TeSys Deca CAD, and TeSys Deca LC1D. Mounting is done on the front side of the contactor, with simple snap-in installation enabling quick and secure installation. The block is designed for use in harsh environmental conditions and offers high reliability and durability.

Applications

The auxiliary switch block is used in industrial plants where additional switching functions are required for control and monitoring tasks. It is used, for example, for signal transmission, actuation of auxiliary devices, or feedback of the contactor status to control systems. The combination of protected and unprotected contacts allows flexible adaptation to different requirements in plant engineering.

Functions and Equipment in Detail

The block features a contact configuration of 2 S (encapsulated) + 1 S + 1 Oe. The two encapsulated closing contacts (S) are dust- and moisture-protected and suitable for applications with low rated operational voltage. The rated operational voltage is 125 V AC and 30 V DC. The two additional contacts (1 S + 1 Oe) are unprotected and can be operated up to 690 V AC with a rated operational current of 0.1 A. The mechanical life is 5 million switching cycles, ensuring long service life under industrial conditions.

Technology Explained Simply

The encapsulated contacts offer enhanced protection against dust and moisture, which is particularly beneficial in humid or dusty environments. The unprotected contacts are designed for higher voltages and meet the requirements for rated insulation voltage according to IEC 60947-5-1 (690 V AC) as well as UL 60947-5-1 and CSA C22.2 No. 60947-5-1 (600 V AC). The conventional thermal current is 10 A at 40 °C, describing the thermal load capacity under operating conditions. The minimum switching voltage is 5 V for protected and 17 V for unprotected contacts, with minimum switching currents of 1 mA and 5 mA respectively. The insulation resistance is greater than 10 MΩ, ensuring high electrical insulation.

Compatibility and Accessories

The auxiliary switch block is compatible with the mentioned contactor product families from TeSys D and TeSys F. It can be combined with other auxiliary contactors from the TeSys series, such as models CAD32SD, CAD32E7, CAD32Q7, CAD50GD, CAD50L7, CAD50Q7, CAD32MD, CAD32GD, CAD32G7, CAD50SD, CAD32L7, CAD32D7, CAD50ED, CAD32M7, CAD50E7, CAD32T7, CAD32X7, CAD32UD, CAD32FD, CAD32B7. These models offer different contact configurations and operating voltages, allowing precise adaptation to specific applications.

Mounting and Installation

Mounting is done on the front side of the contactor by snap-in. Connections are made via screw terminals designed for cable cross-sections of 1 to 2.5 mm² flexible (with and without wire end ferrules) and 1 to 2.5 mm² rigid. The required tightening torque is 1.7 Nm, and mounting can be done using a flathead screwdriver (Ø 6), a Phillips screwdriver No. 2, or a positioning screwdriver No. 2. The dimensions of the block are 48 mm height, 44 mm width, and 39 mm depth.

Operational Advantages

The auxiliary switch block offers high mechanical life, secure and easy mounting, and flexible use through the combination of protected and unprotected contacts. Compliance with international standards such as EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No. 60947-5-1, and GB/T 14048.5, as well as certifications CB, UL, CSA, CCC, EAC, and UKCA, ensures reliability and worldwide use. The protection class IP2x according to IEC 60529 protects against finger contact and provides basic protection against solid objects. The coating corresponds to category TH according to IEC 60068, ensuring resistance to environmental conditions such as temperature and humidity. The operating temperature range is between -25 °C and +70 °C, as is the storage temperature.

Standards and Certifications

The auxiliary switch block complies with standards EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No. 60947-5-1, and GB/T 14048.5. Product certifications include CB, UL, CSA, CCC, EAC, and UKCA. RoHS and REACH compliance is also given, confirming environmental compatibility and the use of non-hazardous materials.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/606452
qrcode für Schneider Electric LA1DZ31 auxiliary switch block 3S+1Ö front-sealed