Schneider Electric LA1DX20, EAN: 3389110236507

Schneider Electric LA1DX20 auxiliary switch block 2S front-sealed

Industrial Material > Control devices / Pilot devices > Motor protection switch

Schneider Electric LA1DX20 auxiliary switch block 2S front-sealed

Lieske Part No. 582784
Mfg Part No LA1DX20
EAN-Code 3389110236507
Manufacturer Schneider Electric
Here only 81,98 EUR
97,56 EUR incl. VAT

Further information for Schneider Electric LA1DX20 auxiliary switch block 2S front-sealed

Complementary
Mechanical durability5 Mcycles
Minimum switching current1 mA
Minimum switching voltage5 V
Insulation resistance> 10 MOhm
Connections - terminalsScrew clamp terminals 1 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 1 cable(s) 1…2.5 mm²flexible without cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible without cable end; Screw clamp terminals 1 cable(s) 1…2.5 mm²rigid; Screw clamp terminals 2 cable(s) 1…2.5 mm²rigid
Tightening torque1.7 N.m - with screwdriver flat Ø 6 mm; 1.7 N.m - with screwdriver Philips No 2; 1.7 N.m - with screwdriver pozidriv No 2
Height48 mm
Width44 mm
Depth39 mm
Net weight0.04 kg
Contractual warranty
Warranty (in months)18
Environment
Environmental characteristicHarsh environment
IP degree of protectionIP2X conforming to IEC 60529
Protective treatmentTH conforming to IEC 60068
Ambient air temperature for storage-25…70 °C
Ambient air temperature for operation-25…70 °C
Logistical informations
Country of originCZ
Main
RangeTeSys
Product nameTeSys Deca
Product or component typeAuxiliary contact block
Device short nameLA1
Range compatibilityTeSys D CAD; TeSys D LC1D; TeSys F LC1F; TeSys F CR1F; TeSys Deca CAD; TeSys Deca LC1D
Mounting locationFront
Pole contact composition2 NO (sealed)
Contacts operationInstantaneous
[Ue] rated operational voltage125 V AC for protected contact; 30 V DC for protected contact
[Ie] rated operational current0.1 A
[Ui] rated insulation voltage250 V conforming to IEC 60947-5-1
StandardsEN/IEC 60947-5-1; UL 60947-5-1; CSA C22.2 No 60947-5-1; GB/T 14048.5
Product certificationsCB; UL; CSA; CCC; EAC; UKCA
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.200 cm
Package 1 Width4.000 cm
Package 1 Length4.800 cm
Package 1 Weight52.000 g
Unit Type of Package 2S02
Number of Units in Package 280
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight4.505 kg
The auxiliary switch block LA1DX20 from Schneider Electric belongs to the TeSys series and is designed as TeSys Deca. It serves as an additional component for contactors of the TeSys D/F series, particularly for models TeSys D CAD, TeSys D LC1D, TeSys F LC1F, TeSys F CR1F, TeSys Deca CAD, and TeSys Deca LC1D. The block is mounted on the front side of the contactor and enables the integration of auxiliary contacts into existing control systems. It is equipped with two encapsulated auxiliary contacts (2S) that switch instantaneously, making them suitable for signals, controls, or status indicators in industrial applications.

Applications

The auxiliary switch block is designed for use in industrial environments, particularly in applications with harsh environmental conditions. It is commonly used in control systems, drive technology, machine building, and automation systems, where the reliability and longevity of switching components are critical. Installation is performed by snapping onto the front of the contactor, enabling quick and secure mounting without additional tools.

Functions and Equipment in Detail

The block features two protected contacts (2S), rated for an operating voltage of 125 V AC and 30 V DC. The rated operating current is 0.1 A, sufficient for most control and signaling applications. The rated insulation voltage is 250 V, complying with IEC 60947-5-1. The contacts are designed for operation in environments with temperatures ranging from -25 °C to +70 °C, both during storage and operation. The mechanical life is 5 million switching cycles, ensuring high operational reliability and longevity.

Technology Explained Simply

The contacts are encapsulated, providing high mechanical stability and protection against external influences such as dust or moisture. The screw terminals allow connection with cables having a cross-section of 1 to 2.5 mm², either flexible or rigid, with or without wire end ferrules. The tightening torque is 1.7 Nm, and installation can be performed using a flat-head screwdriver (Ø 6 mm), a Phillips screwdriver No. 2, or a Pozidriv screwdriver No. 2. The insulation resistance is greater than 10 MΩ, ensuring high electrical insulation and safety. The protection rating IP2x according to IEC 60529 protects against finger contact and larger solid objects, but not against water or dust. The coating corresponds to category TH according to IEC 60068, indicating high resistance to environmental influences.

Compatibility and Accessories

The auxiliary switch block is compatible with the specified contactor models from the TeSys D/F series. It can be combined with other auxiliary contactors available in the range, such as CAD50E7, CAD32U7, CAD50ED, CAD32L7, CAD50FD, CAD32MD, CAD32B7, CAD50R7, CAD32Q7, CAD50U7, CAD50BD, CAD50P7, CAD32FD, CAD32X7, CAD32V7, CAD50P7TQ, CAD50SD, CAD32GD, CAD50FE7, CAD50Q7. These components extend the functionality of the control system and enable complex control logic.

Mounting and Installation

Mounting is performed by snapping onto the front side of the contactor. The screw terminals are designed for cables with a cross-section of 1 to 2.5 mm². Cables can be flexible or rigid, with or without wire end ferrules. Installation is done with a screwdriver, ensuring the specified tightening torque of 1.7 Nm is maintained. The dimensions of the block are 48 mm (height), 44 mm (width), and 39 mm (depth). The product weight is 0.04 kg.

Operational Advantages

The auxiliary switch block offers high reliability due to the encapsulated contacts and long mechanical life. The simple snap-on mounting on the front side reduces installation time. Certifications according to EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No. 60947-5-1, and GB/T 14048.5, as well as product certifications CB, UL, CSA, CCC, EAC, and UKCA, ensure compliance with international standards. Conformity with RoHS/REACH (Green Premium) guarantees environmentally friendly manufacturing. The operating temperature range of -25 °C to +70 °C enables use in a wide range of industrial environments.

Standards and Certifications

The auxiliary switch block complies with standards EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No. 60947-5-1, and GB/T 14048.5. Product certifications include CB, UL, CSA, CCC, EAC, and UKCA. The protection rating IP2x according to IEC 60529 and the TH coating according to IEC 60068 ensure suitability for harsh environmental conditions. The operating temperature range of -25 °C to +70 °C is appropriate for industrial applications. The warranty period is 18 months.

Compatibility and Application

The auxiliary switch block is specifically developed for use with contactors from the TeSys D/F series. It can be used in various industrial applications, such as in machine building, automation technology, drive technology, and control technology. Combining it with other auxiliary contactors allows for extending the functionality of the control system. Mounting is performed by snapping onto the front side of the contactor, enabling quick and secure installation. The screw terminals are designed for cables with a cross-section of 1 to 2.5 mm², allowing both flexible and rigid cables. Installation is done with a screwdriver, ensuring the specified tightening torque of 1.7 Nm is maintained. The dimensions of the block are 48 mm (height), 44 mm (width), and 39 mm (depth). The product weight is 0.04 kg. The operating temperature range is -25 °C to +70 °C. The protection rating is IP2x according to IEC 60529. The coating corresponds to TH according to IEC 60068. Certifications include CB, UL, CSA, CCC, EAC, and UKCA. The warranty period is 18 months.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/582784
qrcode für Schneider Electric LA1DX20 auxiliary switch block 2S front-sealed