| Complementary |
| Provided equipment | End cover |
| Mounting location | Central |
| Mounting mode | By screws |
| Mounting support | Busbar |
| Connections - terminals | Terminal block - Pg 21 - screw clamp connector for 10 mm² |
| Width | 562 mm |
| Depth | 75.5 mm |
| Height | 75.5 mm |
| Net weight | 500 g |
| Standards | IEC 61439-6 |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| IP degree of protection | IP55 conforming to IEC 60529 |
| Logistical informations |
| Country of origin | CZ |
| Main |
| Range of product | Canalis |
| Device short name | KBA |
| Product compatibility | Canalis KBA busbar trunking 25…40 A |
| Offer type | Classic; Control system |
| Product or component type | Feed unit |
| Conductors material | Aluminium |
| [Ie] rated operational current | 40 A; 25 A |
| [Ue] rated operational voltage | 230...400 V |
| Number of circuits | 1 |
| Busbar trunking polarity | 3L + N + PE; L + N + PE |
| Protection type | Without protection |
| Control type | Communicating |
| Communication port protocol | DALI |
| Colour | White (RAL 9003) |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 9.0 cm |
| Package 1 Width | 22.0 cm |
| Package 1 Length | 64.0 cm |
| Package 1 Weight | 2.7 kg |
| Unit Type of Package 2 | P06 |
| Number of Units in Package 2 | 22 |
| Package 2 Height | 80.0 cm |
| Package 2 Width | 80.0 cm |
| Package 2 Length | 60.0 cm |
| Package 2 Weight | 67.9 kg |
This is a feeder unit for Canalis KBA busbar distribution boards. Canalis KBA is designed for the distribution of lighting and sockets. The rated operating current is 40A at 35°C. The rated operating voltage is between 230VAC and 400VAC 50/60Hz. This feeder unit is a central mounting element, it is clipped onto the lines on both sides. It accommodates power cables with a cross-section of 10 mm² and a maximum diameter of 19 mm (PG 21). It embeds 1 circuit with 3L+N+PE polarity. It offers IP55 protection according to IEC 60529 standard, which ensures the protection of the cable ducts against splashing water and dust. It offers IK06 protection according to IEC 62262 standard against external mechanical shocks. The length is 562 mm and the cross-section is 78.5 mm x 75.5 mm. It is made of white painted steel sheet RAL 9003. Canalis KBA complies with the IEC/EN 61439-6 standard. It is non-flame propagating in accordance with the recommendations of the IEC 60332-3 standard. All insulation and plastic materials are halogen-free and have increased fire resistance (IEC 60695-2).