| Complementary |
| Transmission rate | 100 Mbits |
| Mounting support | Flange |
| Motor flange size | 85 mm |
| Number of motor stacks | 3 |
| Centring collar diameter | 60 mm |
| Centring collar depth | 2 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 6.5 mm |
| Circle diameter of the mounting holes | 99 mm |
| Feedback type | Index pulse |
| Shaft end | Untapped |
| Second shaft | Without second shaft end |
| Shaft diameter | 14 mm |
| Shaft length | 30 mm |
| Supply voltage limits | 18…55 V |
| Current consumption | 6000 mA maximum continuous |
| Associated fuse rating | 16 A |
| Commissioning interface | RS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds) |
| Input/output type | 4 signals (each be used as input or output) |
| Voltage state 0 guaranteed | -3...4.5 V |
| Voltage state 1 guaranteed | 15...30 V |
| Discrete input current | 10 mA at 24 V for safety input; 2 mA at 24 V for 24 V signal interface |
| Discrete output voltage | 23...25 V |
| Maximum switching current | 100 mA per output; 200 mA total |
| Protection type | Short circuit of the output voltage; Safe torque off; Overload of output voltage |
| Peak stall torque | 4.5 N.m |
| Continuous stall torque | 4.5 N.m |
| Speed feedback resolution | 20000 points/turn |
| Accuracy error | +/- 6 arc min |
| Rotor inertia | 3.3 kg.cm² |
| Maximum mechanical speed | 3000 rpm |
| Maximum radial force Fr | 110 N |
| Maximum axial force Fa | 170 N (tensile force); 30 N (force pressure) |
| Service life in hours | 20000 h bearing |
| Marking | CE |
| Type of cooling | Natural convection |
| Net weight | 4.7 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | IEC 61800-3, Ed 2; IEC 60072-1; IEC 50178; IEC 61800-3; EN 61800-3 : 2001-02; IEC 50347; EN 61800-3:2001, second environment |
| Product certifications | cUL; TÜV; UL |
| Ambient air temperature for operation | 40…55 °C (with power derating of 2 % per °C); 0…40 °C (without derating) |
| Permissible ambient air temperature around the device | 105 °C power amplifier; 110 °C motor |
| Ambient air temperature for storage | -25…70 °C |
| Relative humidity | 15…85 % without condensation |
| Vibration resistance | 20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6 |
| Shock resistance | 150 m/s² 1000 shocks conforming to IEC 60068-2-29 |
| IP degree of protection | IP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5 |
| Logistical informations |
| Country of origin | DE |
| Main |
| Range of product | Lexium integrated drive |
| Product or component type | Motion integrated drive |
| Device short name | ILS |
| Motor type | 3-phase stepper motor |
| Number of motor poles | 6 |
| Network number of phases | Single phase |
| [Us] rated supply voltage | 24 V; 48 V |
| Network type | DC |
| Communication interface | EtherCAT, integrated |
| Length | 200.6 mm |
| Winding type | High speed of rotation and medium torque |
| Electrical connection | Industrial connector |
| Holding brake | Without |
| Gear box type | Without |
| Nominal speed | 200 rpm at 24 V; 400 rpm at 48 V |
| Nominal torque | 4.5 N.m |
| Holding torque | 4.5 N.m |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 22.000 cm |
| Package 1 Width | 40.500 cm |
| Package 1 Length | 19.500 cm |
| Package 1 Weight | 5.726 kg |
The integrated stepper motor ILS2E853TC1A0 from Schneider Electric belongs to the Lexium ILS2 series and combines a 3-phase AC stepper motor with integrated drive electronics in a compact unit. It is designed for decentralized drive applications in industry where precise positioning and high holding torque are required. The unit is operated via a single-phase supply of 24 V or 48 V DC, with the rated speed being 200 rpm at 24 V and 400 rpm at 48 V. The winding is designed for high speeds and medium torque, with both the rated torque and holding torque amounting to 4.5 Nm. The maximum mechanical speed is 3000 rpm, and the device achieves a peak torque at standstill of 4.5 Nm. Position detection is performed via an index pulse system, enabling a speed feedback resolution of 20,000 points per revolution, ensuring high positioning accuracy with an accuracy error of +/- 6 arc minutes.
Applications
This drive is suitable for applications requiring precise, repeatable movements, such as in automation technology, packaging industry, or machine building. The integrated electronics enable direct control via the EtherCAT fieldbus, which offers a data transfer rate of 100 Mbit/s. Communication is achieved through an industrial connector, ensuring a robust and reliable connection. The unit is designed for industrial environments, with protection rating IP54 (except shaft bearing, IP41), providing protection against dust and splashing water. The operating temperature ranges from 0 °C to 40 °C without performance reduction; from 40 °C to 55 °C, a performance drop of 2 % per degree Celsius occurs. Storage is possible at temperatures from -25 °C to 70 °C.
Functions and Equipment in Detail
The drive features four discrete inputs/outputs, each configurable as either input or output. The voltage levels for a guaranteed status 0 are between -3 V and 4.5 V, and for status 1 between 15 V and 30 V. The maximum current draw is 6000 mA at continuous power, and the corresponding fuse is rated for 16 A. Safety functions include Safe Torque Off (STO), allowing the torque to be safely switched off. The output voltage is protected against short-circuit and overload. Commissioning is performed via an RS485 interface with Modbus TCP, supporting baud rates of 9.6, 19.2, and 38.4 kBaud.
Technology Explained Simply
The integrated drive electronics enable direct control of the motor without additional drive units. The winding is designed for high speed, with torque decreasing at higher speeds. Position detection via the index pulse system ensures precise feedback of the current position, which is essential for continuous motion and exact positioning. Cooling is achieved through natural convection, eliminating the need for additional fans or heatsinks. The bearing life is 20,000 hours.
Compatibility and Accessories
Various accessories are available to extend functionality, including EtherCAT connectors and cable sets (e.g. VW3L5E000, VW3L30001R30), inserts for I/O signals (e.g. VW3L40420, VW3L40300), and gearboxes for different reduction ratios (e.g. GBX080020K, GBY080004K). These components allow adaptation to specific requirements such as higher torque, reduced speeds, or special mounting conditions. Mounting is done via a flange with a diameter of 85 mm, featuring four mounting holes with a diameter of 6.5 mm and a circle diameter of 99 mm. The center ring has a diameter of 60 mm and a depth of 2 mm.
Mounting and Installation
Mounting is performed via the designated flange, enabling secure attachment to machines or systems. The shaft end construction consists of a smooth shaft with a diameter of 14 mm and a length of 30 mm. No second shaft is present. The unit is designed for operation up to an altitude of 1000 m without performance reduction. Vibration resistance is 20 m/s² in the frequency range of 10 to 500 Hz, and shock resistance is 150 m/s² with 1000 shocks, complying with standards IEC 60068-2-6 and IEC 60068-2-29.
Operational Advantages
The integrated drive offers high operational safety due to the integrated electronics and the STO safety function. Direct control via EtherCAT enables fast and reliable communication in the network. The high positioning accuracy and stable torque at standstill make the drive suitable for precise motion sequences. Natural cooling and robust construction ensure long service life and low maintenance requirements. The unit is certified to cUL, TÜV, and UL, and complies with standards IEC 61800-3, IEC 60072-1, and IEC 50178. Operating temperature and environmental conditions are designed for industrial applications, with relative humidity allowed between 15 % and 85 % without condensation occurring.