Schneider Electric ILS1V853TB1A0, EAN: 3389119227797

Schneider Electric ILS1V853TB1A0 drive+stepper motor 24-36 V

Industrial Material > Engines and accessories

Schneider Electric ILS1V853TB1A0 drive+stepper motor 24-36 V

Lieske Part No. 867082
Mfg Part No ILS1V853TB1A0
EAN-Code 3389119227797
Manufacturer Schneider Electric
Here only 1.305,30 EUR
1.553,31 EUR incl. VAT

Further information for Schneider Electric ILS1V853TB1A0 drive+stepper motor 24-36 V

Complementary
Mounting supportFlange
Motor flange size85 mm
Number of motor stacks3
Centring collar diameter60 mm
Centring collar depth2 mm
Number of mounting holes4
Mounting holes diameter6.5 mm
Circle diameter of the mounting holes99 mm
Feedback typeIndex pulse
Shaft endUntapped
Second shaftWithout second shaft end
Shaft diameter14 mm
Shaft length30 mm
Supply voltage limits18…40 V
Current consumption6000 mA maximum continuous
Associated fuse rating10 A
Input/output type4 signals (each be used as input or output)
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Discrete input current10 mA at 24 V for safety input
Discrete output voltage23...25 V
Maximum switching current100 mA per output; 200 mA total
Protection typeShort circuit of the output voltage; Safe torque off; Overload of output voltage
Peak stall torque4.5 N.m
Continuous stall torque4.5 N.m
Speed feedback resolution1.8°, 0.9°, 0.72°, 0.36°, 0.18°, 0.09°, 0.072°, 0.036°; 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps
Accuracy error+/- 6 arc min
Rotor inertia3.3 kg.cm²
Maximum mechanical speed2000 rpm
Maximum radial force Fr110 N
Maximum axial force Fa170 N (tensile force); 30 N (force pressure)
Service life in hours20000 h bearing
MarkingCE
Type of coolingNatural convection
Net weight4.7 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsIEC 61800-3, Ed 2; EN 61800-3 : 2001-02; IEC 50178; IEC 60072-1; IEC 61800-3; IEC 50347; EN 61800-3:2001, second environment
Product certificationsTÜV; UL; cUL
Ambient air temperature for operation50…65 °C (with power derating of 2 % per °C); 0…50 °C (without derating)
Permissible ambient air temperature around the device105 °C power amplifier; 110 °C motor
Ambient air temperature for storage-25…70 °C
Relative humidity15…85 % without condensation
Vibration resistance20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6
Shock resistance150 m/s² 1000 shocks conforming to IEC 60068-2-29
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5
Logistical informations
Country of originDE
Main
Range of productLexium integrated drive
Product or component typeMotion integrated drive
Device short nameILS
Motor type3-phase stepper motor
Number of motor poles6
Network number of phasesSingle phase
[Us] rated supply voltage24 V; 36 V
Network typeDC
Communication interfacePulse/direction 5 V without RS422, integrated
Length200.6 mm
Winding typeHigh speed of rotation and medium torque
Electrical connectionPrinted circuit board connector
Holding brakeWithout
Gear box typeWithout
Nominal speed100 rpm at 24 V; 300 rpm at 36 V
Nominal torque4.5 N.m
Holding torque4.5 N.m
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height19.500 cm
Package 1 Width22.000 cm
Package 1 Length39.500 cm
Package 1 Weight5.715 kg
Unit Type of Package 2S04
Number of Units in Package 22
Package 2 Height30 cm
Package 2 Width40 cm
Package 2 Length60 cm
Package 2 Weight12.067 kg
Unit Type of Package 3P12
Number of Units in Package 38
Package 3 Height45.000 cm
Package 3 Width80.000 cm
Package 3 Length120.000 cm
Package 3 Weight60.268 kg
Integrated stepper motor from the Lexium ILS1 series. This series of decentralized drives consists of a compact unit of the 3-phase stepper motor with associated control electronics in small dimensions. These motors are characterized by the high continuous stall torque. These motors are characterized by the high continuous stall torque and good synchronization properties. This stepper motor has a maximum torque and holding torque of 4.5 Nm. The winding is designed for high speeds. The control is via pulse/direction with 5V. The measuring system transmits an index pulse. Control inputs for STO are available as a safety function. The supply voltage is 24-36 VDC and the flange dimension for mounting is 57 mm. PCB connectors are available for the connection. There is no brake. Thanks to the Green Premium environmental label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/867082
qrcode für Schneider Electric ILS1V853TB1A0 drive+stepper motor 24-36 V