Schneider Electric ILS1V572PB1A0, EAN: 3389119227711

Schneider Electric ILS1V572PB1A0 drive+stepper motor 24-36V pulse/direction

Industrial Material > Engines and accessories

Schneider Electric ILS1V572PB1A0 drive+stepper motor 24-36V pulse/direction

Lieske Part No. 870232
Mfg Part No ILS1V572PB1A0
EAN-Code 3389119227711
Manufacturer Schneider Electric
Here only 1.061,15 EUR
1.262,77 EUR incl. VAT

Further information for Schneider Electric ILS1V572PB1A0 drive+stepper motor 24-36V pulse/direction

Complementary
Mounting supportFlange
Motor flange size57 mm
Number of motor stacks2
Centring collar diameter38.1 mm
Centring collar depth1.6 mm
Number of mounting holes4
Mounting holes diameter5.2 mm
Circle diameter of the mounting holes66.6 mm
Feedback typeIndex pulse
Shaft endUntapped
Second shaftWithout second shaft end
Shaft diameter6.35 mm
Shaft length21 mm
Supply voltage limits18…40 V
Current consumption3500 mA maximum continuous
Associated fuse rating10 A
Input/output type4 signals (each be used as input or output)
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Discrete input current10 mA at 24 V for safety input
Discrete output voltage23...25 V
Maximum switching current100 mA per output; 200 mA total
Protection typeShort circuit of the output voltage; Safe torque off; Overload of output voltage
Peak stall torque0.9 N.m
Continuous stall torque0.9 N.m
Speed feedback resolution1.8°, 0.9°, 0.72°, 0.36°, 0.18°, 0.09°, 0.072°, 0.036°; 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps
Accuracy error+/- 6 arc min
Rotor inertia0.22 kg.cm²
Maximum mechanical speed3000 rpm
Maximum radial force Fr24 N
Maximum axial force Fa100 N (tensile force); 8.4 N (force pressure)
Service life in hours20000 h bearing
MarkingCE
Type of coolingNatural convection
Net weight1.6 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsIEC 50347; IEC 61800-3; IEC 60072-1; IEC 61800-3, Ed 2; EN 61800-3:2001, second environment; EN 61800-3 : 2001-02; IEC 50178
Product certificationsTÜV; cUL; UL
Ambient air temperature for operation50…65 °C (with power derating of 2 % per °C); 0…50 °C (without derating)
Permissible ambient air temperature around the device105 °C power amplifier; 110 °C motor
Ambient air temperature for storage-25…70 °C
Relative humidity15…85 % without condensation
Vibration resistance20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6
Shock resistance150 m/s² 1000 shocks conforming to IEC 60068-2-29
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5
Main
Range of productLexium integrated drive
Product or component typeMotion integrated drive
Device short nameILS
Motor type3-phase stepper motor
Number of motor poles6
Network number of phasesSingle phase
[Us] rated supply voltage24 V; 36 V
Network typeDC
Communication interfacePulse/direction 5 V without RS422, integrated
Length115.9 mm
Winding typeMedium speed of rotation and medium torque
Electrical connectionPrinted circuit board connector
Holding brakeWithout
Gear box typeWithout
Nominal speed300 rpm at 24 V; 600 rpm at 36 V
Nominal torque0.9 N.m
Holding torque1.02 N.m
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height10.900 cm
Package 1 Width17.300 cm
Package 1 Length24.300 cm
Package 1 Weight1.746 kg
Unit Type of Package 2S06
Number of Units in Package 210
Package 2 Height73.500 cm
Package 2 Width60.000 cm
Package 2 Length80.000 cm
Package 2 Weight32.390 kg
Unit Type of Package 3S04
Number of Units in Package 310
Package 3 Height30.000 cm
Package 3 Width40.000 cm
Package 3 Length60.000 cm
Package 3 Weight18.732 kg
Integrated stepper motor from the Lexium ILS1 series. This series of decentralized drives consists of a compact unit of the 3-phase stepper motor with associated control electronics in small dimensions. These motors are characterized by the high continuous stall torque. These motors are characterized by the high continuous stall torque and good synchronization properties. This stepper motor has a maximum torque of 0.9 Nm and a holding torque of 1.02 Nm. The winding is designed for medium speeds. The control is via pulse/direction with 5V. The measuring system transmits an index pulse. Control inputs for STO are available as a safety function. The supply voltage is 24-36 VDC and the flange dimension for mounting is 57 mm. PCB connectors are available for the connection. There is no brake. Thanks to the Green Premium environmental label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/870232
qrcode für Schneider Electric ILS1V572PB1A0 drive+stepper motor 24-36V pulse/direction