Schneider Electric ILS1R571PB1A0, EAN: 3389119227377

Schneider Electric ILS1R571PB1A0 integrated drive with stepper motor 24-36 V

Industrial Material > Engines and accessories

Schneider Electric ILS1R571PB1A0 integrated drive with stepper motor 24-36 V

Lieske Part No. 864987
Mfg Part No ILS1R571PB1A0
EAN-Code 3389119227377
Manufacturer Schneider Electric
Here only 1.084,90 EUR
1.291,03 EUR incl. VAT

Further information for Schneider Electric ILS1R571PB1A0 integrated drive with stepper motor 24-36 V

Complementary
Transmission rate9.6, 19.2 and 38.4 kbauds
Mounting supportFlange
Motor flange size57 mm
Number of motor stacks1
Centring collar diameter38.1 mm
Centring collar depth1.6 mm
Number of mounting holes4
Mounting holes diameter5.2 mm
Circle diameter of the mounting holes66.6 mm
Feedback typeIndex pulse
Shaft endUntapped
Second shaftWithout second shaft end
Shaft diameter6.35 mm
Shaft length21 mm
Supply voltage limits18…40 V
Current consumption3500 mA maximum
Associated fuse rating10 A
Input/output type4 signals (each be used as input or output)
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Discrete input current10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 2 mA at 24 V for 24 V signal interface
Discrete output voltage23...25 V
Maximum switching current100 mA per output; 200 mA total
Protection typeSafe torque off; Short circuit of the output voltage; Overload of output voltage
Peak stall torque0.45 N.m
Continuous stall torque0.45 N.m
Speed feedback resolution20000 points/turn
Accuracy error+/- 6 arc min
Rotor inertia0.1 kg.cm²
Maximum mechanical speed3000 rpm
Maximum radial force Fr24 N
Maximum axial force Fa100 N (tensile force); 8.4 N (force pressure)
Service life in hours20000 h bearing
MarkingCE
Type of coolingNatural convection
Net weight1.3 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsIEC 60072-1; EN 61800-3:2001, second environment; EN/IEC 50178; EN 61800-3 : 2001-02; EN 50347; EN/IEC 61800-3; IEC 61800-3, Ed 2
Product certificationscUL; UL; TÜV
Ambient air temperature for operation50…65 °C (with power derating of 2 % per °C); 0…50 °C (without derating)
Permissible ambient air temperature around the device105 °C power amplifier; 110 °C motor
Ambient air temperature for storage-25…70 °C
Relative humidity15…85 % without condensation
Vibration resistance20 m/s² (f= 10…500 Hz) 10 cycles conforming to EN/IEC 60068-2-6
Shock resistance150 m/s² 1000 shocks conforming to EN/IEC 60068-2-29
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5; IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Main
Range of productLexium integrated drive
Product or component typeMotion integrated drive
Device short nameILS
Motor type3-phase stepper motor
Number of motor poles6
Network number of phasesSingle phase
[Us] rated supply voltage36 V; 24 V
Network typeDC
Communication interfaceRS485, integrated
Length101.9 mm
Winding typeMedium speed of rotation and medium torque
Electrical connectionPrinted circuit board connector
Holding brakeWithout
Gear box typeWithout
Nominal speed1000 rpm at 36 V; 500 rpm at 24 V
Nominal torque0.45 N.m
Holding torque0.51 N.m
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height10.5 cm
Package 1 Width19.0 cm
Package 1 Length39.0 cm
Package 1 Weight2.1 kg
Integrated stepper motor from the Lexium ILS1 series. This series of decentralized drives consists of a compact unit of the 3-phase stepper motor with associated control electronics in small dimensions. These motors are characterized by the high continuous stall torque. These motors are characterized by the high continuous stall torque and good synchronization properties. This stepper motor has a maximum torque of 0.45 Nm and a holding torque of 0.51 Nm. The winding is designed for medium speeds. The control is via an RS485 interface. The measuring system transmits an index pulse. Control inputs for STO are available as a safety function. The supply voltage is 24-36 VDC and the flange dimension for mounting is 57 mm. PCB connectors are available for the connection. There is no brake. Thanks to the Green Premium environmental label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/864987
qrcode für Schneider Electric ILS1R571PB1A0 integrated drive with stepper motor 24-36 V