Schneider Electric ILS1M573PB1A0, EAN: 3389119227285

Schneider Electric ILS1M573PB1A0 drive+stepper motor 24-36V-E/A

Industrial Material > Engines and accessories

Schneider Electric ILS1M573PB1A0 drive+stepper motor 24-36V-E/A

Lieske Part No. 864381
Mfg Part No ILS1M573PB1A0
EAN-Code 3389119227285
Manufacturer Schneider Electric
Here only 1.108,65 EUR
1.319,29 EUR incl. VAT

Further information for Schneider Electric ILS1M573PB1A0 drive+stepper motor 24-36V-E/A

Complementary
Transmission rate9.6, 19.2 and 38.4 kbauds
Mounting supportFlange
Motor flange size57 mm
Number of motor stacks3
Centring collar diameter38.1 mm
Centring collar depth1.6 mm
Number of mounting holes4
Mounting holes diameter5.2 mm
Circle diameter of the mounting holes66.6 mm
Feedback typeIndex pulse
Shaft endUntapped
Second shaftWithout second shaft end
Shaft diameter8 mm
Shaft length21 mm
Supply voltage limits18…40 V
Current consumption3500 mA maximum continuous
Associated fuse rating10 A
Commissioning interfaceRS485 (9.6, 19.2 and 38.4 kbauds)
Input/output type4 signals (each be used as input or output)
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Discrete input current10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 10 mA at 24 V for 24 V signal interface
Discrete output voltage10...30 V
Maximum switching current100 mA per output; 200 mA total
Protection typeOverload of output voltage; Short circuit of the output voltage; Safe torque off
Peak stall torque1.5 N.m
Continuous stall torque1.5 N.m
Speed feedback resolution20000 points/turn
Accuracy error+/- 6 arc min
Rotor inertia0.38 kg.cm²
Maximum mechanical speed3000 rpm
Maximum radial force Fr50 N
Maximum axial force Fa100 N (tensile force); 8.4 N (force pressure)
Service life in hours20000 h bearing
MarkingCE
Type of coolingNatural convection
Net weight2 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsEN 61800-3 : 2001-02; EN 61800-3:2001, second environment; IEC 61800-3; IEC 60072-1; IEC 50347; IEC 50178; IEC 61800-3, Ed 2
Product certificationsUL; TÜV; cUL
Ambient air temperature for operation50…65 °C (with power derating of 2 % per °C); 0…50 °C (without derating)
Permissible ambient air temperature around the device110 °C motor
Ambient air temperature for storage-25…70 °C
Relative humidity15…85 % without condensation
Vibration resistance20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6
Shock resistance150 m/s² 1000 shocks conforming to IEC 60068-2-29
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5
Logistical informations
Country of originDE
Main
Range of productLexium integrated drive
Product or component typeMotion integrated drive
Device short nameILS
Motor type3-phase stepper motor
Number of motor poles6
Network number of phasesSingle phase
[Us] rated supply voltage36 V; 24 V
Network typeDC
Communication interfaceI/O for motion sequence, integrated
Length138.9 mm
Winding typeMedium speed of rotation and medium torque
Electrical connectionPrinted circuit board connector
Holding brakeWithout
Gear box typeWithout
Nominal speed200 rpm at 24 V; 500 rpm at 36 V
Nominal torque1.5 N.m
Holding torque1.7 N.m
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height10.5 cm
Package 1 Width19.0 cm
Package 1 Length39.0 cm
Package 1 Weight2.8 kg
Integrated stepper motor from the Lexium ILS1 series. This series of decentralized drives consists of a compact unit of the 3-phase stepper motor with associated control electronics in small dimensions. These motors are characterized by the high continuous stall torque. These motors are characterized by the high continuous stall torque and good synchronization properties. This stepper motor has a maximum torque of 1.5 Nm and a holding torque of 1.7 Nm. The winding is designed for medium speeds. The control for movement sequences is carried out via an I/O interface. The measuring system transmits an index pulse. Control inputs for STO are available as a safety function. The supply voltage is 24-36 VDC and the flange dimension for mounting is 57 mm. PCB connectors are available for the connection. There is no brake. Thanks to the Green Premium environmental label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/864381
qrcode für Schneider Electric ILS1M573PB1A0 drive+stepper motor 24-36V-E/A