Schneider Electric ILS1F852PB1F0, EAN: 3389119227155

Schneider Electric ILS1F852PB1F0 integrated drive with stepper motor 24-36V

Industrial Material > Engines and accessories

Schneider Electric ILS1F852PB1F0 integrated drive with stepper motor 24-36V

Lieske Part No. 866309
Mfg Part No ILS1F852PB1F0
EAN-Code 3389119227155
Manufacturer Schneider Electric
Here only 1.914,25 EUR
2.277,96 EUR incl. VAT

Further information for Schneider Electric ILS1F852PB1F0 integrated drive with stepper motor 24-36V

Complementary
Transmission rate50, 100, 125, 250, 500, 800 and 1000 kbauds
Mounting supportFlange
Motor flange size85 mm
Number of motor stacks2
Centring collar diameter60 mm
Centring collar depth2 mm
Number of mounting holes4
Mounting holes diameter6.5 mm
Circle diameter of the mounting holes99 mm
Feedback typeIndex pulse
Shaft endUntapped
Second shaftWithout second shaft end
Shaft diameter12 mm
Shaft length30 mm
Supply voltage limits18…40 V
Current consumption5000 mA maximum
Associated fuse rating10 A
Input/output type4 signals (each be used as input or output)
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Discrete input current10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 2 mA at 24 V for 24 V signal interface
Discrete output voltage23...25 V
Maximum switching current100 mA per output; 200 mA total
Protection typeShort circuit of the output voltage; Safe torque off; Overload of output voltage
Peak stall torque4 N.m
Continuous stall torque4 N.m
Speed feedback resolution20000 points/turn
Accuracy error+/- 6 arc min
Rotor inertia2.4 kg.cm²
Maximum mechanical speed1500 rpm
Maximum radial force Fr100 N
Maximum axial force Fa170 N (tensile force); 30 N (force pressure)
Service life in hours20000 h bearing
Brake pull-in power22 W
Brake release time40 ms
Brake application time20 ms
MarkingCE
Type of coolingNatural convection
Net weight5.4 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsEN 61800-3 : 2001-02; EN/IEC 61800-3; EN/IEC 50178; EN 50347; IEC 60072-1; IEC 61800-3, Ed 2; EN 61800-3:2001, second environment
Product certificationsUL; TÜV; cUL
Ambient air temperature for operation50…65 °C (with power derating of 2 % per °C); 0…50 °C (without derating)
Permissible ambient air temperature around the device105 °C power amplifier; 110 °C motor
Ambient air temperature for storage-25…70 °C
Relative humidity15…85 % without condensation
Vibration resistance20 m/s² (f= 10…500 Hz) 10 cycles conforming to EN/IEC 60068-2-6
Shock resistance150 m/s² 1000 shocks conforming to EN/IEC 60068-2-29
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5; IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Logistical informations
Country of originDE
Main
Range of productLexium integrated drive
Product or component typeMotion integrated drive
Device short nameILS
Motor type3-phase stepper motor
Number of motor poles6
Network number of phasesSingle phase
[Us] rated supply voltage36 V; 24 V
Network typeDC
Communication interfaceCANopen DS301, integrated
Length217.3 mm
Winding typeMedium speed of rotation and medium torque
Electrical connectionPrinted circuit board connector
Holding brakeWith
Gear box typeWithout
Nominal speed100 rpm at 24 V; 200 rpm at 36 V
Nominal torque4 N.m
Holding torque6 N.m holding brake; 4 N.m
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height10.5 cm
Package 1 Width19.0 cm
Package 1 Length39.0 cm
Package 1 Weight4.4 kg
Integrated stepper motor from the Lexium ILS1 series. This series of decentralized drives consists of a compact unit of the 3-phase stepper motor with associated control electronics in small dimensions. These motors are characterized by the high continuous stall torque. These motors are characterized by the high continuous stall torque and good synchronization properties. This stepper motor has a maximum torque and holding torque of 4 Nm. The winding is designed for medium speeds. The control is via CANopen DS301. The measuring system transmits an index pulse. Control inputs for STO are available as a safety function. The supply voltage is 24-36 VDC and the flange dimension for mounting is 57 mm. PCB connectors are available for the connection. A holding brake is integrated. Thanks to the Green Premium environmental label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/866309
qrcode für Schneider Electric ILS1F852PB1F0 integrated drive with stepper motor 24-36V