| Complementary |
| Transmission rate | 10, 100 Mbits |
| Mounting support | Flange |
| Motor flange size | 66 mm |
| Number of motor stacks | 1 |
| Centring collar diameter | 40 mm |
| Centring collar depth | 2 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 4.4 mm |
| Circle diameter of the mounting holes | 73.54 mm |
| Feedback type | BLDC encoder |
| Shaft end | Untapped |
| Second shaft | Without second shaft end |
| Shaft diameter | 8 mm |
| Shaft length | 25 mm |
| Supply voltage limits | 18…55.2 V |
| Current consumption | 7000 mA peak; 5500 mA maximum continuous |
| Associated fuse rating | 16 A |
| Commissioning interface | RS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds) |
| Input/output type | 4 signals (each be used as input or output) |
| Voltage state 0 guaranteed | -3...4.5 V |
| Voltage state 1 guaranteed | 15...30 V |
| Discrete input current | 10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 2 mA at 24 V for 24 V signal interface |
| Discrete output voltage | 23...25 V |
| Maximum switching current | 100 mA per output; 200 mA total |
| Protection type | Overload of output voltage; Safe torque off; Short circuit of the output voltage |
| Maximum supply current | 0.1 A (power stage disabled); 6.8 A at 24 V; 3.8 A at 48 V |
| Nominal output power | 131 W at 24 V; 163 W at 48 V |
| Peak stall torque | 0.43 N.m at 24 V; 0.43 N.m at 48 V |
| Continuous stall torque | 0.28 N.m |
| Detent torque | 0.08 N.m |
| Speed feedback resolution | 12 points/turn |
| Accuracy error | +/- 0.5 ° |
| Rotor inertia | 0.17 kg.cm² |
| Maximum mechanical speed | 6500 rpm; 7000 rpm |
| Maximum radial force Fr | 80 N |
| Maximum axial force Fa | 30 N (force pressure); 30 N (tensile force) |
| Service life in hours | 20000 h bearing |
| Marking | CE |
| Type of cooling | Natural convection |
| Net weight | 1.4 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | EN 61800-3:2001, second environment; IEC 50178; IEC 60072-1; IEC 61800-3; IEC 61800-3, Ed 2; IEC 50347; EN 61800-3 : 2001-02 |
| Product certifications | TÜV; cUL; UL |
| Ambient air temperature for operation | 40…55 °C (with power derating of 2 % per °C); 0…40 °C (without derating) |
| Permissible ambient air temperature around the device | 105 °C power amplifier; 110 °C motor |
| Ambient air temperature for storage | -25…70 °C |
| Relative humidity | 15…85 % without condensation |
| Vibration resistance | 20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6 |
| Shock resistance | 150 m/s² 1000 shocks conforming to IEC 60068-2-29 |
| IP degree of protection | IP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5 |
| Main |
| Range of product | Lexium integrated drive |
| Product or component type | Motion integrated drive |
| Device short name | ILE |
| Motor type | Brushless DC motor |
| Number of motor poles | 6 |
| Network number of phases | Single phase |
| [Us] rated supply voltage | 24 V; 48 V |
| Network type | DC |
| Communication interface | Modbus TCP, integrated |
| Length | 122 mm |
| Winding type | Medium speed of rotation and medium torque |
| Electrical connection | Industrial connector |
| Holding brake | Without |
| Gear box type | Without |
| Reduction ratio | 1:1 |
| Nominal speed | 4800 rpm at 24 V; 6000 rpm at 48 V |
| Nominal torque | 0.26 N.m at 24 V; 0.26 N.m at 48 V |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 11.100 cm |
| Package 1 Width | 17.000 cm |
| Package 1 Length | 24.800 cm |
| Package 1 Weight | 1.712 kg |
Integrated drive from the Lexium ILE2 series. This series of decentralized drives consists of a compact unit of the brushless DC motor and the associated control electronics with small dimensions. These motors are characterized by a high currentless self-holding torque. This EC motor has a maximum torque of 0.43 Nm and a self-holding torque of 0.06 Nm. The voltage-dependent speed is up to 6000 rpm. The control is carried out via the Modbus TCP field bus. A single-turn encoder with 12 points/revolution is available as a measuring system. Control inputs for STO are available as a safety function. The supply voltage is 24-36 VDC and the flange size for mounting is 66 mm. Industrial connectors are available for the connection. There is no gearbox mounted on the EC motor. Thanks to the Green Premium environmental label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.