Schneider Electric ILE2T661PB1A2, EAN: 3606485189215

Schneider Electric ILE2T661PB1A2 EC motor 24-48 V

Schneider Electric ILE2T661PB1A2 EC motor 24-48 V

Lieske Part No. 896107
Mfg Part No ILE2T661PB1A2
EAN-Code 3606485189215
Manufacturer Schneider Electric
Here only 1.661,55 EUR
1.977,24 EUR incl. VAT

Further information for Schneider Electric ILE2T661PB1A2 EC motor 24-48 V

Complementary
Transmission rate10, 100 Mbits
Mounting supportFlange
Motor flange size66 mm
Number of motor stacks1
Centring collar diameter16 mm
Centring collar depth4 mm
Number of mounting holes4
Mounting holes diameter4.4 mm
Circle diameter of the mounting holes73.54 mm
Feedback typeBLDC encoder
Shaft endKeyed
Second shaftWithout second shaft end
Shaft diameter10 mm
Shaft length25 mm
Key width16 mm
Supply voltage limits18…55.2 V
Current consumption7000 mA peak; 5500 mA maximum continuous
Associated fuse rating16 A
Commissioning interfaceRS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds)
Input/output type4 signals (each be used as input or output)
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Discrete input current10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 2 mA at 24 V for 24 V signal interface
Discrete output voltage23...25 V
Maximum switching current100 mA per output; 200 mA total
Protection typeOverload of output voltage; Short circuit of the output voltage; Safe torque off
Maximum supply current0.1 A (power stage disabled); 6.8 A at 24 V; 3.8 A at 48 V
Nominal output power119 W at 48 V; 95 W at 24 V
Peak stall torque13.07 N.m at 24 V; 13.07 N.m at 48 V
Continuous stall torque8.3 N.m
Detent torque3 N.m
Speed feedback resolution12 points/turn motor; 0.8° gearbox output
Accuracy error+/- 0.5 point
Maximum torsional backlash1 °
Rotor inertia211 kg.cm²
Maximum mechanical speed133 rpm
Maximum radial force Fr200 N (long-term operation); 200 N (short-term operation)
Maximum axial force Fa10 N (long-term operation); 80 N (short-term operation)
Service life in hours2500 h bearing short-term operation; 15000 h bearing long-term operation
MarkingCE
Type of coolingNatural convection
Net weight1.85 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsIEC 50347; EN 61800-3 : 2001-02; EN 61800-3:2001, second environment; IEC 60072-1; IEC 61800-3; IEC 61800-3, Ed 2; IEC 50178
Product certificationsTÜV; UL; cUL
Ambient air temperature for operation40…55 °C (with power derating of 2 % per °C); 0…40 °C (without derating)
Permissible ambient air temperature around the device105 °C power amplifier; 110 °C motor
Ambient air temperature for storage-25…70 °C
Relative humidity15…85 % without condensation
Vibration resistance20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6
Shock resistance150 m/s² 1000 shocks conforming to IEC 60068-2-29
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5
Main
Range of productLexium integrated drive
Product or component typeMotion integrated drive
Device short nameILE
Motor typeBrushless DC motor
Number of motor poles6
Network number of phasesSingle phase
[Us] rated supply voltage48 V; 24 V
Network typeDC
Communication interfaceModbus TCP, integrated
Length174 mm
Winding typeMedium speed of rotation and medium torque
Electrical connectionPrinted circuit board connector
Holding brakeWithout
Gear box typeStraight teeth gear, 3 stages
Reduction ratio38:1 (75:2)
Nominal speed107 rpm at 24 V; 133 rpm at 48 V
Nominal torque7.3 N.m at 24 V; 7.3 N.m at 48 V
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height8.0 cm
Package 1 Width18.5 cm
Package 1 Length35.5 cm
Package 1 Weight2.8 kg
Integrated drive from the Lexium ILE2 series. This series of decentralized drives consists of a compact unit of the brushless DC motor and the associated control electronics with small dimensions. These motors are characterized by a high currentless self-holding torque. This EC motor has a maximum torque of 0.43 Nm and a self-holding torque of 0.06 Nm. The voltage-dependent speed is up to 6000 rpm. The control is carried out via the Modbus TCP field bus. A single-turn encoder with 12 points/revolution is available as a measuring system. Control inputs for STO are available as a safety function. The supply voltage is 24-36 VDC and the flange size for mounting is 66 mm. PCB connectors are available for the connection. A spur gear with a reduction ratio of 38:1 is mounted on the EC motor. Thanks to the Green Premium ecolabel, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/896107
qrcode für Schneider Electric ILE2T661PB1A2 EC motor 24-48 V