Complementary
Transmission rate	125, 250, 500 kbauds
Mounting support	Flange
Motor flange size	66 mm
Number of motor stacks	1
Centring collar diameter	40 mm
Centring collar depth	2 mm
Number of mounting holes	4
Mounting holes diameter	4.4 mm
Circle diameter of the mounting holes	73.54 mm
Feedback type	BLDC encoder
Shaft end	Untapped
Second shaft	Without second shaft end
Shaft diameter	8 mm
Shaft length	25 mm
Supply voltage limits	18…55.2 V
Current consumption	7000 mA peak; 5500 mA maximum continuous
Associated fuse rating	16 A
Commissioning interface	RS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds)
Input/output type	4 signals (each be used as input or output)
Voltage state 0 guaranteed	-3...4.5 V
Voltage state 1 guaranteed	15...30 V
Discrete input current	10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 2 mA at 24 V for 24 V signal interface
Discrete output voltage	23...25 V
Maximum switching current	100 mA per output; 200 mA total
Protection type	Safe torque off; Overload of output voltage; Short circuit of the output voltage
Maximum supply current	0.1 A (power stage disabled); 6.8 A at 24 V; 3.8 A at 48 V
Nominal output power	131 W at 24 V; 163 W at 48 V
Peak stall torque	0.43 N.m at 24 V; 0.43 N.m at 48 V
Continuous stall torque	0.28 N.m
Detent torque	0.08 N.m
Speed feedback resolution	12 points/turn
Accuracy error	+/- 0.5 °
Rotor inertia	0.17 kg.cm²
Maximum mechanical speed	7000 rpm; 6500 rpm
Maximum radial force Fr	80 N
Maximum axial force Fa	30 N (force pressure); 30 N (tensile force)
Service life in hours	20000 h bearing
Marking	CE
Type of cooling	Natural convection
Net weight	1.4 kg
Contractual warranty
Warranty (in months)	18
Environment
Standards	EN 61800-3 : 2001-02; IEC 50178; EN 61800-3:2001, second environment; IEC 60072-1; IEC 61800-3, Ed 2; IEC 61800-3; IEC 50347
Product certifications	cUL; UL; TÜV
Ambient air temperature for operation	40…55 °C (with power derating of 2 % per °C); 0…40 °C (without derating)
Permissible ambient air temperature around the device	105 °C power amplifier; 110 °C motor
Ambient air temperature for storage	-25…70 °C
Relative humidity	15…85 % without condensation
Vibration resistance	20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6
Shock resistance	150 m/s² 1000 shocks conforming to IEC 60068-2-29
IP degree of protection	IP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5
Logistical informations
Country of origin	DE
Main
Range of product	Lexium integrated drive
Product or component type	Motion integrated drive
Device short name	ILE
Motor type	Brushless DC motor
Number of motor poles	6
Network number of phases	Single phase
[Us] rated supply voltage	24 V; 48 V
Network type	DC
Communication interface	Ethernet/IP, integrated
Length	122 mm
Winding type	Medium speed of rotation and medium torque
Electrical connection	Industrial connector
Holding brake	Without
Gear box type	Without
Reduction ratio	1:1
Nominal speed	4800 rpm at 24 V; 6000 rpm at 48 V
Nominal torque	0.26 N.m at 24 V; 0.26 N.m at 48 V
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	8.0 cm
Package 1 Width	18.5 cm
Package 1 Length	36.5 cm
Package 1 Weight	1.7 kg

This EC motor has a maximum torque of 0.43 Nm and a self-holding torque of 0.06 Nm. The voltage-dependent speed is up to 6000 rpm. It is controlled via the Ethernet IP field bus. A single-turn encoder with 12 points/revolution is available as a measuring system. Industrial connectors are available for the connection. There is no gearbox mounted on the EC motor.