Schneider Electric ILE2K661PB1A6, EAN: 3606485204734

Schneider Electric ILE2K661PB1A6 EC motor 24-48 V EtherNet/IP

Schneider Electric ILE2K661PB1A6 EC motor 24-48 V EtherNet/IP

Lieske Part No. 890954
Mfg Part No ILE2K661PB1A6
EAN-Code 3606485204734
Manufacturer Schneider Electric
Here only 2.221,10 EUR
2.643,11 EUR incl. VAT

Further information for Schneider Electric ILE2K661PB1A6 EC motor 24-48 V EtherNet/IP

Complementary
Transmission rate125, 250, 500 kbauds
Mounting supportFlange
Motor flange size66 mm
Number of motor stacks1
Centring collar diameter36 mm
Number of mounting holes2
Mounting holes diameter4.4 mm
Feedback typeBLDC encoder
Shaft endHole
Second shaftWithout second shaft end
Supply voltage limits18…55.2 V
Current consumption7000 mA peak; 5500 mA maximum continuous
Associated fuse rating16 A
Commissioning interfaceRS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds)
Input/output type4 signals (each be used as input or output)
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Discrete input current10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 2 mA at 24 V for 24 V signal interface
Discrete output voltage23...25 V
Maximum switching current100 mA per output; 200 mA total
Protection typeSafe torque off; Short circuit of the output voltage; Overload of output voltage
Maximum supply current0.1 A (power stage disabled); 6.8 A at 24 V; 2.7 A at 48 V
Nominal output power45 W at 24 V; 47 W at 48 V
Peak stall torque13.93 N.m at 24 V; 13.93 N.m at 48 V
Continuous stall torque8 N.m
Detent torque6.5 N.m
Speed feedback resolution12 points/turn motor; 0.56° gearbox output
Accuracy error+/- 1 point
Rotor inertia430 kg.cm²
Maximum mechanical speed93 rpm
Maximum radial force Fr200 N
Maximum axial force Fa80 N
Service life in hours6000 h bearing
MarkingCE
Type of coolingNatural convection
Net weight2.3 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsEN 61800-3 : 2001-02; IEC 61800-3, Ed 2; EN 61800-3:2001, second environment; IEC 60072-1; IEC 50347; IEC 61800-3; IEC 50178
Product certificationscUL; UL; TÜV
Ambient air temperature for operation40…55 °C (with power derating of 2 % per °C); 0…40 °C (without derating)
Permissible ambient air temperature around the device105 °C power amplifier; 110 °C motor
Ambient air temperature for storage-25…70 °C
Relative humidity15…85 % without condensation
Vibration resistance20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6
Shock resistance150 m/s² 1000 shocks conforming to IEC 60068-2-29
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5
Main
Range of productLexium integrated drive
Product or component typeMotion integrated drive
Device short nameILE
Motor typeBrushless DC motor
Number of motor poles6
Network number of phasesSingle phase
[Us] rated supply voltage48 V; 24 V
Network typeDC
Communication interfaceEthernet/IP, integrated
Length229 mm
Winding typeMedium speed of rotation and medium torque
Electrical connectionPrinted circuit board connector
Holding brakeWithout
Gear box typeWorm gear, 3 stages
Reduction ratio54:1 (1715:32)
Nominal speed75 rpm at 24 V; 75 rpm at 48 V
Nominal torque6 N.m at 24 V; 6 N.m at 48 V
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height12.500 cm
Package 1 Width39.700 cm
Package 1 Length19.600 cm
Package 1 Weight2.586 kg
This EC motor has a maximum torque of 0.43 Nm and a self-holding torque of 0.06 Nm. The voltage-dependent speed is up to 6000 rpm. It is controlled via the Ethernet IP field bus. A single-turn encoder with 12 points/revolution is available as a measuring system. PCB connectors are available for the connection. An angle worm gear with a reduction ratio of 54:1 is mounted on the EC motor.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/890954
qrcode für Schneider Electric ILE2K661PB1A6 EC motor 24-48 V EtherNet/IP