| Complementary |
| Transmission rate | 50, 100, 125, 250, 500, 800 and 1000 kbauds |
| Mounting support | Flange |
| Motor flange size | 66 mm |
| Number of motor stacks | 1 |
| Centring collar diameter | 36 mm |
| Number of mounting holes | 2 |
| Mounting holes diameter | 4.4 mm |
| Feedback type | BLDC encoder |
| Shaft end | Hole |
| Second shaft | Without second shaft end |
| Supply voltage limits | 18…40 V |
| Current consumption | 7000 mA peak; 5500 mA maximum continuous |
| Associated fuse rating | 10 A |
| Input/output type | 4 signals (each be used as input or output) |
| Voltage state 0 guaranteed | -3...4.5 V |
| Voltage state 1 guaranteed | 15...30 V |
| Discrete input current | 10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 2 mA at 24 V for 24 V signal interface |
| Discrete output voltage | 23...25 V |
| Maximum switching current | 100 mA per output; 200 mA total |
| Protection type | Short circuit of the output voltage; Safe torque off; Overload of output voltage |
| Maximum supply current | 0.1 A (power stage disabled); 6.8 A at 24 V; 3.8 A at 36 V |
| Nominal output power | 41 W at 24 V; 42 W at 36 V |
| Peak stall torque | 11.96 N.m at 24 V; 16.56 N.m at 36 V |
| Continuous stall torque | 11.7 N.m |
| Detent torque | 12.3 N.m |
| Speed feedback resolution | 12 points/turn motor; 0.33° gearbox output |
| Accuracy error | +/- 1 point |
| Maximum torsional backlash | 1 ° |
| Rotor inertia | 1270 kg.cm² |
| Maximum mechanical speed | 54 rpm |
| Maximum radial force Fr | 200 N |
| Maximum axial force Fa | 80 N |
| Service life in hours | 9000 h bearing |
| Marking | CE |
| Type of cooling | Natural convection |
| Net weight | 2.3 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | IEC 50347; IEC 50178; IEC 61800-3; IEC 61800-3, Ed 2; EN 61800-3 : 2001-02; EN 61800-3:2001, second environment; IEC 60072-1 |
| Product certifications | UL; TÜV; cUL |
| Ambient air temperature for operation | 50…65 °C (with power derating of 2 % per °C); 0…50 °C (without derating) |
| Permissible ambient air temperature around the device | 105 °C power amplifier; 110 °C motor |
| Ambient air temperature for storage | -25…70 °C |
| Relative humidity | 15…85 % without condensation |
| Vibration resistance | 20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6 |
| Shock resistance | 150 m/s² 1000 shocks conforming to IEC 60068-2-29 |
| IP degree of protection | IP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5 |
| Main |
| Range of product | Lexium integrated drive |
| Product or component type | Motion integrated drive |
| Device short name | ILE |
| Motor type | Brushless DC motor |
| Number of motor poles | 6 |
| Network number of phases | Single phase |
| [Us] rated supply voltage | 36 V; 24 V |
| Network type | DC |
| Communication interface | CANopen DS301, integrated |
| Length | 229 mm |
| Winding type | Medium speed of rotation and medium torque |
| Electrical connection | Industrial connector |
| Holding brake | Without |
| Gear box type | Worm gear, 3 stages |
| Reduction ratio | 92:1 (735:5) |
| Nominal speed | 44 rpm at 24 V; 44 rpm at 36 V |
| Nominal torque | 9 N.m at 24 V; 9.2 N.m at 36 V |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 9.0 cm |
| Package 1 Width | 19.0 cm |
| Package 1 Length | 38.5 cm |
| Package 1 Weight | 2.25 kg |
Integrated drive from the Lexium ILE1 series. This series of decentralized drives consists of a compact unit of the brushless DC motor and the associated control electronics with small dimensions. These motors are characterized by a high currentless self-holding torque. This EC motor has a maximum torque of 0.36 Nm and a continuous torque of 0.26 Nm. The voltage-dependent speed is up to 4800 rpm. The control is via CANopen DS301. A single-turn encoder with 12 points/revolution is available as a measuring system. Control inputs for STO are available as a safety function. The supply voltage is 24-36 VDC and the flange size for mounting is 66 mm. Industrial connectors are available for the connection. An angle worm gear with a reduction ratio of 92:1 is mounted on the EC motor. Thanks to the Green Premium ecolabel, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.