| Complementary |
| Transmission rate | 50, 100, 125, 250, 500, 800 and 1000 kbauds |
| Mounting support | Flange |
| Motor flange size | 66 mm |
| Number of motor stacks | 1 |
| Centring collar diameter | 40 mm |
| Centring collar depth | 2 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 4.4 mm |
| Circle diameter of the mounting holes | 73.54 mm |
| Feedback type | BLDC encoder |
| Shaft end | Untapped |
| Second shaft | Without second shaft end |
| Shaft diameter | 8 mm |
| Shaft length | 25 mm |
| Supply voltage limits | 18…40 V |
| Current consumption | 7000 mA peak; 5500 mA maximum continuous |
| Associated fuse rating | 10 A |
| Input/output type | 4 signals (each be used as input or output) |
| Voltage state 0 guaranteed | -3...4.5 V |
| Voltage state 1 guaranteed | 15...30 V |
| Discrete input current | 10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 2 mA at 24 V for 24 V signal interface |
| Discrete output voltage | 23...25 V |
| Maximum switching current | 100 mA per output; 200 mA total |
| Protection type | Safe torque off; Short circuit of the output voltage; Overload of output voltage |
| Maximum supply current | 0.06 A at 36 V (power stage disabled); 0.1 A at 24 V (power stage disabled); 4.7 A at 24 V; 5.1 A at 36 V |
| Nominal output power | 117 W at 36 V; 74 W at 24 V |
| Peak stall torque | 0.26 N.m at 24 V; 0.36 N.m at 36 V |
| Continuous stall torque | 0.27 N.m |
| Detent torque | 0.08 N.m |
| Speed feedback resolution | 12 points/turn |
| Accuracy error | +/- 1 ° |
| Rotor inertia | 0.149 kg.cm² |
| Maximum mechanical speed | 5000 rpm |
| Maximum radial force Fr | 80 N |
| Maximum axial force Fa | 30 N (force pressure); 30 N (tensile force) |
| Service life in hours | 20000 h bearing |
| Marking | CE |
| Type of cooling | Natural convection |
| Net weight | 1.4 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | IEC 50347; IEC 61800-3; EN 61800-3 : 2001-02; EN 61800-3:2001, second environment; IEC 60072-1; IEC 50178; IEC 61800-3, Ed 2 |
| Product certifications | TÜV; cUL; UL |
| Ambient air temperature for operation | 50…65 °C (with power derating of 2 % per °C); 0…50 °C (without derating) |
| Permissible ambient air temperature around the device | 105 °C power amplifier; 110 °C motor |
| Ambient air temperature for storage | -25…70 °C |
| Relative humidity | 15…85 % without condensation |
| Vibration resistance | 20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6 |
| Shock resistance | 150 m/s² 1000 shocks conforming to IEC 60068-2-29 |
| IP degree of protection | IP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5 |
| Logistical informations |
| Country of origin | DE |
| Main |
| Range of product | Lexium integrated drive |
| Product or component type | Motion integrated drive |
| Device short name | ILE |
| Motor type | Brushless DC motor |
| Number of motor poles | 6 |
| Network number of phases | Single phase |
| [Us] rated supply voltage | 24 V; 36 V |
| Network type | DC |
| Communication interface | CANopen DS301, integrated |
| Length | 122 mm |
| Winding type | Medium speed of rotation and medium torque |
| Electrical connection | Industrial connector |
| Holding brake | Without |
| Gear box type | Without |
| Reduction ratio | 1:1 |
| Nominal speed | 4000 rpm at 24 V; 4800 rpm at 36 V |
| Nominal torque | 0.175 N.m at 24 V; 0.24 N.m at 36 V |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 8.0 cm |
| Package 1 Width | 18.5 cm |
| Package 1 Length | 35.5 cm |
| Package 1 Weight | 1.8 kg |
Integrated drive from the Lexium ILE1 series. This series of decentralized drives consists of a compact unit of the brushless DC motor and the associated control electronics with small dimensions. These motors are characterized by a high currentless self-holding torque. This EC motor has a maximum torque of 0.36 Nm and a continuous torque of 0.26 Nm. The voltage-dependent speed is up to 4800 rpm. The control is via CANopen DS301. A single-turn encoder with 12 points/revolution is available as a measuring system. Control inputs for STO are available as a safety function. The supply voltage is 24-36 VDC and the flange size for mounting is 66 mm. Industrial connectors are available for the connection. There is no gearbox mounted on the EC motor. Thanks to the Green Premium environmental label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.