| Complementary |
| Transmission rate | 50, 100, 125, 250, 500, 800 and 1000 kbauds |
| Mounting support | Flange |
| Motor flange size | 66 mm |
| Number of motor stacks | 1 |
| Centring collar diameter | 16 mm |
| Centring collar depth | 4 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 4.4 mm |
| Circle diameter of the mounting holes | 73.54 mm |
| Feedback type | BLDC encoder |
| Shaft end | Keyed |
| Second shaft | Without second shaft end |
| Shaft diameter | 10 mm |
| Shaft length | 25 mm |
| Key width | 16 mm |
| Supply voltage limits | 18…40 V |
| Current consumption | 7000 mA peak; 5500 mA maximum continuous |
| Associated fuse rating | 10 A |
| Input/output type | 4 signals (each be used as input or output) |
| Voltage state 0 guaranteed | -3...4.5 V |
| Voltage state 1 guaranteed | 15...30 V |
| Discrete input current | 10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 2 mA at 24 V for 24 V signal interface |
| Discrete output voltage | 23...25 V |
| Maximum switching current | 100 mA per output; 200 mA total |
| Protection type | Short circuit of the output voltage; Safe torque off; Overload of output voltage |
| Maximum supply current | 0.06 A at 36 V (power stage disabled); 0.1 A at 24 V (power stage disabled); 2.1 A at 36 V; 2.6 A at 24 V |
| Nominal output power | 38 W at 24 V; 48 W at 36 V |
| Peak stall torque | 14.95 N.m at 24 V; 20.7 N.m at 36 V |
| Continuous stall torque | 14 N.m |
| Detent torque | 8 N.m |
| Speed feedback resolution | 12 points/turn motor; 0.26° gearbox output |
| Accuracy error | +/- 1 point |
| Maximum torsional backlash | 1 ° |
| Rotor inertia | 1962 kg.cm² |
| Maximum mechanical speed | 44 rpm |
| Maximum radial force Fr | 200 N (long-term operation); 200 N (short-term operation) |
| Maximum axial force Fa | 10 N (long-term operation); 80 N (short-term operation) |
| Service life in hours | 2500 h bearing short-term operation; 15000 h bearing long-term operation |
| Marking | CE |
| Type of cooling | Natural convection |
| Net weight | 1.85 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | EN 61800-3 : 2001-02; EN 61800-3:2001, second environment; IEC 61800-3; IEC 61800-3, Ed 2; IEC 50178; IEC 60072-1; IEC 50347 |
| Product certifications | cUL; TÜV; UL |
| Ambient air temperature for operation | 50…65 °C (with power derating of 2 % per °C); 0…50 °C (without derating) |
| Permissible ambient air temperature around the device | 105 °C power amplifier; 110 °C motor |
| Ambient air temperature for storage | -25…70 °C |
| Relative humidity | 15…85 % without condensation |
| Vibration resistance | 20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6 |
| Shock resistance | 150 m/s² 1000 shocks conforming to IEC 60068-2-29 |
| IP degree of protection | IP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5 |
| Main |
| Range of product | Lexium integrated drive |
| Product or component type | Motion integrated drive |
| Device short name | ILE |
| Motor type | Brushless DC motor |
| Number of motor poles | 6 |
| Network number of phases | Single phase |
| [Us] rated supply voltage | 24 V; 36 V |
| Network type | DC |
| Communication interface | CANopen DS301, integrated |
| Length | 174 mm |
| Winding type | Medium speed of rotation and medium torque |
| Electrical connection | Printed circuit board connector |
| Holding brake | Without |
| Gear box type | Straight teeth gear, 4 stages |
| Reduction ratio | 115:1 (3675:32) |
| Nominal speed | 35 rpm at 24 V; 42 rpm at 36 V |
| Nominal torque | 10 N.m at 24 V; 11 N.m at 36 V |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 11.800 cm |
| Package 1 Width | 19.100 cm |
| Package 1 Length | 39.700 cm |
| Package 1 Weight | 2.278 kg |
| Unit Type of Package 2 | S04 |
| Number of Units in Package 2 | 4 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 40.000 cm |
| Package 2 Length | 60.000 cm |
| Package 2 Weight | 10.532 kg |
Integrated drive from the Lexium ILE1 series. This series of decentralized drives consists of a compact unit of the brushless DC motor and the associated control electronics with small dimensions. These motors are characterized by a high currentless self-holding torque. This EC motor has a maximum torque of 0.36 Nm and a continuous torque of 0.26 Nm. The voltage-dependent speed is up to 4800 rpm. The control is via CANopen DS301. A single-turn encoder with 12 points/revolution is available as a measuring system. Control inputs for STO are available as a safety function. The supply voltage is 24-36 VDC and the flange size for mounting is 66 mm. PCB connectors are available for the connection. A spur gear with a reduction ratio of 115:1 is mounted on the EC motor. Thanks to the Green Premium ecolabel, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.