Schneider Electric ILE1F661PB1A3, EAN: 3389119222334

Schneider Electric ILE1F661PB1A3 EC motor 24-36 V

Schneider Electric ILE1F661PB1A3 EC motor 24-36 V

Lieske Part No. 901984
Mfg Part No ILE1F661PB1A3
EAN-Code 3389119222334
Manufacturer Schneider Electric
Here only 1.295,80 EUR
1.542,00 EUR incl. VAT

Further information for Schneider Electric ILE1F661PB1A3 EC motor 24-36 V

Complementary
Transmission rate50, 100, 125, 250, 500, 800 and 1000 kbauds
Mounting supportFlange
Motor flange size66 mm
Number of motor stacks1
Centring collar diameter16 mm
Centring collar depth4 mm
Number of mounting holes4
Mounting holes diameter4.4 mm
Circle diameter of the mounting holes73.54 mm
Feedback typeBLDC encoder
Shaft endKeyed
Second shaftWithout second shaft end
Shaft diameter10 mm
Shaft length25 mm
Key width16 mm
Supply voltage limits18…40 V
Current consumption7000 mA peak; 5500 mA maximum continuous
Associated fuse rating10 A
Input/output type4 signals (each be used as input or output)
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Discrete input current10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 2 mA at 24 V for 24 V signal interface
Discrete output voltage23...25 V
Maximum switching current100 mA per output; 200 mA total
Protection typeSafe torque off; Overload of output voltage; Short circuit of the output voltage
Maximum supply current0.06 A at 36 V (power stage disabled); 0.1 A at 24 V (power stage disabled); 3.5 A at 36 V; 4.3 A at 24 V
Nominal output power73 W at 24 V; 88 W at 36 V
Peak stall torque12.64 N.m at 24 V; 17.5 N.m at 36 V
Continuous stall torque11.5 N.m
Detent torque3.3 N.m
Speed feedback resolution12 points/turn motor; 0.55° gearbox output
Accuracy error+/- 1 point
Maximum torsional backlash1 °
Rotor inertia441 kg.cm²
Maximum mechanical speed92 rpm
Maximum radial force Fr200 N (long-term operation); 200 N (short-term operation)
Maximum axial force Fa10 N (long-term operation); 80 N (short-term operation)
Service life in hours2500 h bearing short-term operation; 15000 h bearing long-term operation
MarkingCE
Type of coolingNatural convection
Net weight1.85 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsIEC 60072-1; EN 61800-3:2001, second environment; IEC 50178; IEC 61800-3; IEC 50347; IEC 61800-3, Ed 2; EN 61800-3 : 2001-02
Product certificationsTÜV; UL; cUL
Ambient air temperature for operation50…65 °C (with power derating of 2 % per °C); 0…50 °C (without derating)
Permissible ambient air temperature around the device105 °C power amplifier; 110 °C motor
Ambient air temperature for storage-25…70 °C
Relative humidity15…85 % without condensation
Vibration resistance20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6
Shock resistance150 m/s² 1000 shocks conforming to IEC 60068-2-29
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5
Main
Range of productLexium integrated drive
Product or component typeMotion integrated drive
Device short nameILE
Motor typeBrushless DC motor
Number of motor poles6
Network number of phasesSingle phase
[Us] rated supply voltage36 V; 24 V
Network typeDC
Communication interfaceCANopen DS301, integrated
Length174 mm
Winding typeMedium speed of rotation and medium torque
Electrical connectionPrinted circuit board connector
Holding brakeWithout
Gear box typeStraight teeth gear, 4 stages
Reduction ratio54:1 (490:9)
Nominal speed73 rpm at 24 V; 88 rpm at 36 V
Nominal torque10 N.m at 36 V; 9.5 N.m at 24 V
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height11 cm
Package 1 Width19 cm
Package 1 Length39 cm
Package 1 Weight2.315 kg
Unit Type of Package 2S04
Number of Units in Package 25
Package 2 Height30 cm
Package 2 Width40 cm
Package 2 Length60 cm
Package 2 Weight12.802 kg
Unit Type of Package 3S06
Number of Units in Package 310
Package 3 Height73.5 cm
Package 3 Width60 cm
Package 3 Length80 cm
Package 3 Weight36.15 kg
Integrated drive from the Lexium ILE1 series. This series of decentralized drives consists of a compact unit of the brushless DC motor and the associated control electronics with small dimensions. These motors are characterized by a high currentless self-holding torque. This EC motor has a maximum torque of 0.36 Nm and a continuous torque of 0.26 Nm. The voltage-dependent speed is up to 4800 rpm. The control is via CANopen DS301. A single-turn encoder with 12 points/revolution is available as a measuring system. Control inputs for STO are available as a safety function. The supply voltage is 24-36 VDC and the flange size for mounting is 66 mm. PCB connectors are available for the connection. A spur gear with a reduction ratio of 54:1 is mounted on the EC motor. Thanks to the Green Premium ecolabel, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/901984
qrcode für Schneider Electric ILE1F661PB1A3 EC motor 24-36 V