Schneider Electric ILE1F661PB1A0, EAN: 3389119222303

Schneider Electric ILE1F661PB1A0 EC motor 24-36 V

Schneider Electric ILE1F661PB1A0 EC motor 24-36 V

Lieske Part No. 902005
Mfg Part No ILE1F661PB1A0
EAN-Code 3389119222303
Manufacturer Schneider Electric
Here only 1.018,40 EUR
1.211,90 EUR incl. VAT

Further information for Schneider Electric ILE1F661PB1A0 EC motor 24-36 V

Complementary
Transmission rate50, 100, 125, 250, 500, 800 and 1000 kbauds
Mounting supportFlange
Motor flange size66 mm
Number of motor stacks1
Centring collar diameter40 mm
Centring collar depth2 mm
Number of mounting holes4
Mounting holes diameter4.4 mm
Circle diameter of the mounting holes73.54 mm
Feedback typeBLDC encoder
Shaft endUntapped
Second shaftWithout second shaft end
Shaft diameter8 mm
Shaft length25 mm
Supply voltage limits18…40 V
Current consumption7000 mA peak; 5500 mA maximum continuous
Associated fuse rating10 A
Input/output type4 signals (each be used as input or output)
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Discrete input current10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 2 mA at 24 V for 24 V signal interface
Discrete output voltage23...25 V
Maximum switching current100 mA per output; 200 mA total
Protection typeOverload of output voltage; Short circuit of the output voltage; Safe torque off
Maximum supply current0.06 A at 36 V (power stage disabled); 0.1 A at 24 V (power stage disabled); 4.7 A at 24 V; 5.1 A at 36 V
Nominal output power117 W at 36 V; 74 W at 24 V
Peak stall torque0.26 N.m at 24 V; 0.36 N.m at 36 V
Continuous stall torque0.27 N.m
Detent torque0.08 N.m
Speed feedback resolution12 points/turn
Accuracy error+/- 1 °
Rotor inertia0.149 kg.cm²
Maximum mechanical speed5000 rpm
Maximum radial force Fr80 N
Maximum axial force Fa30 N (force pressure); 30 N (tensile force)
Service life in hours20000 h bearing
MarkingCE
Type of coolingNatural convection
Net weight1.4 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsIEC 50347; IEC 61800-3, Ed 2; EN 61800-3:2001, second environment; EN 61800-3 : 2001-02; IEC 61800-3; IEC 50178; IEC 60072-1
Product certificationscUL; UL; TÜV
Ambient air temperature for operation50…65 °C (with power derating of 2 % per °C); 0…50 °C (without derating)
Permissible ambient air temperature around the device105 °C power amplifier; 110 °C motor
Ambient air temperature for storage-25…70 °C
Relative humidity15…85 % without condensation
Vibration resistance20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6
Shock resistance150 m/s² 1000 shocks conforming to IEC 60068-2-29
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5
Main
Range of productLexium integrated drive
Product or component typeMotion integrated drive
Device short nameILE
Motor typeBrushless DC motor
Number of motor poles6
Network number of phasesSingle phase
[Us] rated supply voltage24 V; 36 V
Network typeDC
Communication interfaceCANopen DS301, integrated
Length122 mm
Winding typeMedium speed of rotation and medium torque
Electrical connectionPrinted circuit board connector
Holding brakeWithout
Gear box typeWithout
Reduction ratio1:1
Nominal speed4000 rpm at 24 V; 4800 rpm at 36 V
Nominal torque0.175 N.m at 24 V; 0.24 N.m at 36 V
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height10.5 cm
Package 1 Width16.8 cm
Package 1 Length24.2 cm
Package 1 Weight1.684 kg
Unit Type of Package 2S04
Number of Units in Package 28
Package 2 Height30 cm
Package 2 Width40 cm
Package 2 Length60 cm
Package 2 Weight14.724 kg
Integrated drive from the Lexium ILE1 series. This series of decentralized drives consists of a compact unit of the brushless DC motor and the associated control electronics with small dimensions. These motors are characterized by a high currentless self-holding torque. This EC motor has a maximum torque of 0.36 Nm and a continuous torque of 0.26 Nm. The voltage-dependent speed is up to 4800 rpm. The control is via CANopen DS301. A single-turn encoder with 12 points/revolution is available as a measuring system. Control inputs for STO are available as a safety function. The supply voltage is 24-36 VDC and the flange size for mounting is 66 mm. PCB connectors are available for the connection. There is no gearbox mounted on the EC motor. Thanks to the Green Premium environmental label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/902005
qrcode für Schneider Electric ILE1F661PB1A0 EC motor 24-36 V