Schneider Electric ILA2K571PC1F0, EAN: 3606485204475

Schneider Electric ILA2K571PC1F0 drive and servo motor 24–48 V EtherNet/IP

Schneider Electric ILA2K571PC1F0 drive and servo motor 24–48 V EtherNet/IP

Lieske Part No. 889426
Mfg Part No ILA2K571PC1F0
EAN-Code 3606485204475
Manufacturer Schneider Electric
Here only 2.534,60 EUR
3.016,17 EUR incl. VAT

Further information for Schneider Electric ILA2K571PC1F0 drive and servo motor 24–48 V EtherNet/IP

Complementary
Transmission rate125, 250, 500 kbauds
Mounting supportFlange
Motor flange size57 mm
Number of motor stacks1
Centring collar diameter50 mm
Centring collar depth1.6 mm
Number of mounting holes4
Mounting holes diameter5.2 mm
Circle diameter of the mounting holes66.6 mm
Feedback typeSingle turn encoder
Shaft endUntapped
Second shaftWithout second shaft end
Shaft diameter9 mm
Shaft length20 mm
Supply voltage limits18…55.2 V
Current consumption5000 mA maximum continuous; 7000 mA peak
Associated fuse rating16 A
Commissioning interfaceRS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds)
Input/output type4 signals (each be used as input or output)
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Discrete input current10 mA at 24 V for safety input; 2 mA at 24 V for 24 V signal interface
Discrete output voltage23...25 V
Maximum switching current100 mA per output; 200 mA total
Protection typeShort circuit of the output voltage; Overload of output voltage; Safe torque off
Peak stall torque0.62 N.m
Continuous stall torque0.44 N.m
Speed feedback resolution16384 points/turn
Accuracy error+/- 0.05 °
Rotor inertia0.165 kg.cm²
Maximum radial force Fr89 N
Maximum axial force Fa104 N (force pressure); 104 N (tensile force)
Service life in hours20000 h bearing
Brake pull-in power10 W
Brake release time14 ms
Brake application time13 ms
MarkingCE
Type of coolingNatural convection
Net weight1.4 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsEN/IEC 50178; IEC 60072-1; EN/IEC 61800-3; EN 50347; IEC 61800-3, Ed 2; EN 61800-3:2001, second environment; EN 61800-3 : 2001-02
Product certificationsTÜV; UL; cUL
Ambient air temperature for operation40…55 °C (with power derating of 2 % per °C); 0…40 °C (without derating)
Permissible ambient air temperature around the device105 °C power amplifier; 110 °C motor
Ambient air temperature for storage-25…70 °C
Relative humidity15…85 % without condensation
Vibration resistance20 m/s² (f= 10…500 Hz) 10 cycles conforming to EN/IEC 60068-2-6
Shock resistance150 m/s² 1000 shocks conforming to EN/IEC 60068-2-29
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5; IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Logistical informations
Country of originDE
Main
Range of productLexium integrated drive
Product or component typeMotion integrated drive
Device short nameILA
Motor typeAC synchronous servo motor
Number of motor poles6
Network number of phasesSingle phase
[Us] rated supply voltage24 V; 48 V
Network typeDC
Communication interfaceEthernet/IP, integrated
Length190.8 mm
Winding typeMedium speed of rotation and medium torque
Electrical connectionIndustrial connector
Holding brakeWith
Gear box typeWithout
Nominal speed3200 rpm at 24 V; 5100 rpm at 48 V
Nominal torque0.44 N.m
Holding torque1.2 N.m holding brake
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height8.000 cm
Package 1 Width18.500 cm
Package 1 Length35.500 cm
Package 1 Weight2.100 kg
Unit Type of Package 2P06
Number of Units in Package 225
Package 2 Height75.000 cm
Package 2 Width60.000 cm
Package 2 Length80.000 cm
Package 2 Weight62.025 kg
Integrated servo drive from the Lexium ILA2 series. This series of decentralized drives consists of a compact unit of the synchronous servo motor and the associated control electronics with small dimensions. These motors are characterized by their high dynamics and high peak torque. This AC servo has a maximum torque of 0.62 Nm and a continuous torque of 0.44 Nm. The voltage-dependent speed is up to 5100 rpm. The control is carried out via the Ethernet IP field bus. A single-turn encoder with 16384 points/revolution is available as a measuring system. Control inputs for STO are available as a safety function. The supply voltage is 24-48 VDC and the flange size for mounting is 57 mm. Industrial connectors are available for the connection. A holding brake is integrated.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/889426
qrcode für Schneider Electric ILA2K571PC1F0 drive and servo motor 24–48 V EtherNet/IP