Schneider Electric ILA2E571PB1A0, EAN: 3606485187341

Schneider Electric ILA2E571PB1A0 drive and servo motor 24-48 V EtherCAT

Schneider Electric ILA2E571PB1A0 drive and servo motor 24-48 V EtherCAT

Lieske Part No. 899661
Mfg Part No ILA2E571PB1A0
EAN-Code 3606485187341
Manufacturer Schneider Electric
Here only 1.747,05 EUR
2.078,99 EUR incl. VAT

Further information for Schneider Electric ILA2E571PB1A0 drive and servo motor 24-48 V EtherCAT

Complementary
Transmission rate100 Mbits
Mounting supportFlange
Motor flange size57 mm
Number of motor stacks1
Centring collar diameter50 mm
Centring collar depth1.6 mm
Number of mounting holes4
Mounting holes diameter5.2 mm
Circle diameter of the mounting holes66.6 mm
Feedback typeSingle turn encoder
Shaft endUntapped
Second shaftWithout second shaft end
Shaft diameter9 mm
Shaft length20 mm
Supply voltage limits18…55.2 V
Current consumption5000 mA maximum continuous; 7000 mA peak
Associated fuse rating16 A
Commissioning interfaceRS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds)
Input/output type4 signals (each be used as input or output)
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Discrete input current10 mA at 24 V for safety input; 2 mA at 24 V for 24 V signal interface
Discrete output voltage23...25 V
Maximum switching current100 mA per output; 200 mA total
Protection typeSafe torque off; Short circuit of the output voltage; Overload of output voltage
Peak stall torque0.62 N.m
Continuous stall torque0.44 N.m
Speed feedback resolution16384 points/turn
Accuracy error+/- 0.05 °
Rotor inertia0.095 kg.cm²
Maximum radial force Fr89 N
Maximum axial force Fa104 N (force pressure); 104 N (tensile force)
Service life in hours20000 h bearing
MarkingCE
Type of coolingNatural convection
Net weight1.4 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsIEC 50178; IEC 60072-1; IEC 50347; IEC 61800-3; EN 61800-3 : 2001-02; IEC 61800-3, Ed 2; EN 61800-3:2001, second environment
Product certificationscUL; UL; TÜV
Ambient air temperature for operation40…55 °C (with power derating of 2 % per °C); 0…40 °C (without derating)
Permissible ambient air temperature around the device105 °C power amplifier; 110 °C motor
Ambient air temperature for storage-25…70 °C
Relative humidity15…85 % without condensation
Vibration resistance20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6
Shock resistance150 m/s² 1000 shocks conforming to IEC 60068-2-29
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5
Main
Range of productLexium integrated drive
Product or component typeMotion integrated drive
Device short nameILA
Motor typeAC synchronous servo motor
Number of motor poles6
Network number of phasesSingle phase
[Us] rated supply voltage48 V; 24 V
Network typeDC
Communication interfaceEtherCAT, integrated
Length145.3 mm
Winding typeMedium speed of rotation and medium torque
Electrical connectionPrinted circuit board connector
Holding brakeWithout
Gear box typeWithout
Nominal speed3200 rpm at 24 V; 5100 rpm at 48 V
Nominal torque0.44 N.m
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height10.900 cm
Package 1 Width17.000 cm
Package 1 Length24.600 cm
Package 1 Weight1.740 kg
Integrated servo drive from the Lexium ILA2 series. This series of decentralized drives consists of a compact unit of the synchronous servo motor and the associated control electronics with small dimensions. These motors are characterized by their high dynamics and high peak torque. This AC servo has a maximum torque of 0.62 Nm and a continuous torque of 0.44 Nm. The voltage-dependent speed is up to 5100 rpm. The control is carried out via the EtherCAT field bus. A single-turn encoder with 16384 points/revolution is available as a measuring system. Control inputs for STO are available as a safety function. The supply voltage is 24-48 VDC and the flange size for mounting is 57 mm. PCB connectors are available for the connection. There is no brake.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/899661
qrcode für Schneider Electric ILA2E571PB1A0 drive and servo motor 24-48 V EtherCAT