Schneider Electric ILA1F572PB1F0, EAN: 3389119225519

Schneider Electric ILA1F572PB1F0 drive servo motor 24-36 V CANopen

Schneider Electric ILA1F572PB1F0 drive servo motor 24-36 V CANopen

Lieske Part No. 881226
Mfg Part No ILA1F572PB1F0
EAN-Code 3389119225519
Manufacturer Schneider Electric
Here only 1.952,25 EUR
2.323,18 EUR incl. VAT

Further information for Schneider Electric ILA1F572PB1F0 drive servo motor 24-36 V CANopen

Complementary
Transmission rate50, 100, 125, 250, 500, 800 and 1000 kbauds
Mounting supportFlange
Motor flange size57 mm
Number of motor stacks2
Centring collar diameter50 mm
Centring collar depth1.6 mm
Number of mounting holes4
Mounting holes diameter5.2 mm
Circle diameter of the mounting holes66.6 mm
Feedback typeSingle turn encoder
Shaft endUntapped
Second shaftWithout second shaft end
Shaft diameter9 mm
Shaft length20 mm
Supply voltage limits18…40 V
Current consumption7000 mA maximum continuous; 8500 mA peak
Associated fuse rating10 A
Input/output type4 signals (each be used as input or output)
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Discrete input current10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 2 mA at 24 V for 24 V signal interface
Discrete output voltage23...25 V
Maximum switching current100 mA per output; 200 mA total
Protection typeSafe torque off; Short circuit of the output voltage; Overload of output voltage
Peak stall torque0.72 N.m
Continuous stall torque0.45 N.m
Speed feedback resolution16384 points/turn x 4096 turns
Accuracy error+/- 0.05 °
Rotor inertia0.25 kg.cm²
Maximum radial force Fr107 N
Maximum axial force Fa104 N (force pressure); 104 N (tensile force)
Service life in hours20000 h bearing
Brake pull-in power10 W
Brake release time14 ms
Brake application time13 ms
MarkingCE
Type of coolingNatural convection
Net weight1.7 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsIEC 60072-1; IEC 61800-3, Ed 2; EN 61800-3:2001, second environment; IEC 61800-3; EN 61800-3 : 2001-02; IEC 50347; IEC 50178
Product certificationsUL; TÜV; cUL
Ambient air temperature for operation50…65 °C (with power derating of 2 % per °C); 0…50 °C (without derating)
Permissible ambient air temperature around the device105 °C power amplifier; 110 °C motor
Ambient air temperature for storage-25…70 °C
Relative humidity15…85 % without condensation
Vibration resistance20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6
Shock resistance150 m/s² 1000 shocks conforming to IEC 60068-2-29
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5
Logistical informations
Country of originDE
Main
Range of productLexium integrated drive
Product or component typeMotion integrated drive
Device short nameILA
Motor typeAC synchronous servo motor
Number of motor poles6
Network number of phasesSingle phase
[Us] rated supply voltage24 V; 36 V
Network typeDC
Communication interfaceCANopen DS301, integrated
Length209.3 mm
Winding typeMedium speed of rotation and medium torque
Electrical connectionPrinted circuit board connector
Holding brakeWith
Gear box typeWithout
Nominal speed2600 rpm at 24 V; 4300 rpm at 36 V
Nominal torque0.45 N.m
Holding torque1.2 N.m holding brake
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height11.800 cm
Package 1 Width19.200 cm
Package 1 Length39.800 cm
Package 1 Weight2.546 kg
Unit Type of Package 2S04
Number of Units in Package 24
Package 2 Height30.000 cm
Package 2 Width40.000 cm
Package 2 Length60.000 cm
Package 2 Weight11.252 kg
Unit Type of Package 3P06
Number of Units in Package 312
Package 3 Height77.000 cm
Package 3 Width60.000 cm
Package 3 Length80.000 cm
Package 3 Weight39.496 kg
The integrated motion drive ILA1F572PB1F0 from Schneider Electric belongs to the Lexium ILA1 series and combines an AC synchronous servo motor with integrated control electronics in a compact unit. It is designed for decentralized drive applications where space saving and high dynamics are required. The drive is operated via a 1-phase supply with 24 V or 36 V DC, with the rated voltage ranging between 18 V and 40 V. The nominal speed is 2600 rpm at 24 V and 4300 rpm at 36 V, with the speed depending on the supply voltage. The nominal torque is 0.45 Nm, and the peak torque at standstill is 0.72 Nm. The integrated holding brake ensures safe positioning at standstill with a holding torque of 1.2 Nm. The brake has a release time of 14 ms and a braking duration of 13 ms.

Applications

The drive is suitable for precise positioning tasks in automation technology, particularly in machine building, packaging technology, and assembly systems. The combination of high dynamics, good torque, and integrated electronics enables direct integration into existing control systems. Mounting is done via a flange with a 57 mm diameter, with four mounting holes of 5.2 mm diameter and a circle diameter of 66.6 mm provided. The centering ring has a diameter of 50 mm and a depth of 1.6 mm.

Functions and Equipment in Detail

The drive features an integrated communication interface CANopen DS301, enabling flexible control via networks. The transmission speed can be set between 50 and 1000 kBaud. As a feedback system, a single-turn encoder with a resolution of 16384 points per revolution and a maximum speed of 4096 revolutions is integrated. Positioning accuracy is ±0.05°. Electrical connection is made via board connectors, enabling easy integration into existing circuits. Power supply is via DC, with a maximum current draw of 7000 mA under continuous load and 8500 mA as peak value. The corresponding fuse rating is 10 A.

Technology Explained Simply

The AC synchronous servo motor operates at medium speed and medium torque, making it suitable for applications with moderate speed and torque requirements. The winding is designed for balanced performance. The integrated holding brake ensures that the motor remains in the desired position even in case of power failure or standstill. The brake is activated and deactivated via the control system. Cooling is achieved through natural convection, enabling a maintenance-friendly operating mode. The bearing service life is 20,000 hours.

Compatibility and Accessories

The drive is compatible with various gearboxes designed to adapt speed and torque to specific applications. These include, for example, gearboxes from the PLE060 series with reduction ratios from 3:1 to 40:1, as well as right-angle gearboxes with reduction ratios from 4:1 to 20:1. For secure signal transmission, cable sets for STO signals and CANopen interfaces are available. Mounting is supported by cable entry plates and sealing inserts, ensuring an IP54 protection rating.

Mounting and Installation

Mounting is done via the designated flange with a 57 mm diameter. The hole configuration with four holes of 5.2 mm diameter and a circle diameter of 66.6 mm enables secure fastening. The shaft length is 20 mm, the shaft diameter is 9 mm, and the shaft end is smooth. The maximum radial force is 107 N, and the maximum axial force is 104 N. The operating temperature ranges from 0 °C to 50 °C without power reduction; from 50 °C to 65 °C, a power reduction of 2 % per degree Celsius occurs. The storage temperature is -25 °C to 70 °C. The operating altitude is up to 1000 m without power reduction. Relative humidity may range from 15 % to 85 %, with condensation not permitted. Vibration test resistance is 20 m/s² in the frequency range of 10 to 500 Hz, and shock resistance is 150 m/s² for 1000 shocks.

Operational Advantages

The integrated drive offers high operational safety through the integrated holding brake and the safety function Safe Torque Off (STO). The CANopen interface enables easy integration into existing control systems. Natural cooling reduces maintenance effort. The high positioning accuracy provided by the single-turn encoder and the low accuracy deviation of ±0.05° ensure precise movements. The combination of compact design and high performance makes the drive an efficient solution for decentralized drive tasks.

Protection Rating and Certifications

The drive complies with IP41 protection rating at the shaft bearing. Certifications include UL, TÜV, and cUL. Conformity to standards refers to IEC 60072-1, IEC 61800-3 (second environment), EN 61800-3:2001, IEC 50347, and IEC 50178. The device ambient temperature is 105 °C for the power amplifier and 110 °C for the motor. The marking shows the CE symbol.

Product Weight

The product weight is 1.7 kg.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/881226
qrcode für Schneider Electric ILA1F572PB1F0 drive servo motor 24-36 V CANopen