| Complementary |
| Transmission rate | 50, 100, 125, 250, 500, 800 and 1000 kbauds |
| Mounting support | Flange |
| Motor flange size | 57 mm |
| Number of motor stacks | 1 |
| Centring collar diameter | 50 mm |
| Centring collar depth | 1.6 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 5.2 mm |
| Circle diameter of the mounting holes | 66.6 mm |
| Feedback type | Multi turn encoder |
| Shaft end | Untapped |
| Second shaft | Without second shaft end |
| Shaft diameter | 9 mm |
| Shaft length | 20 mm |
| Supply voltage limits | 18…40 V |
| Current consumption | 5000 mA maximum continuous; 7000 mA peak |
| Associated fuse rating | 10 A |
| Input/output type | 4 signals (each be used as input or output) |
| Voltage state 0 guaranteed | -3...4.5 V |
| Voltage state 1 guaranteed | 15...30 V |
| Discrete input current | 10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 2 mA at 24 V for 24 V signal interface |
| Discrete output voltage | 23...25 V |
| Maximum switching current | 100 mA per output; 200 mA total |
| Protection type | Short circuit of the output voltage; Safe torque off; Overload of output voltage |
| Peak stall torque | 0.6 N.m |
| Continuous stall torque | 0.26 N.m |
| Speed feedback resolution | 16384 points/turn x 4096 turns |
| Accuracy error | +/- 0.05 ° |
| Rotor inertia | 0.1 kg.cm² |
| Maximum radial force Fr | 89 N |
| Maximum axial force Fa | 104 N (force pressure); 104 N (tensile force) |
| Service life in hours | 20000 h bearing |
| Marking | CE |
| Type of cooling | Natural convection |
| Net weight | 1.4 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | IEC 61800-3, Ed 2; IEC 50178; EN 61800-3:2001, second environment; IEC 61800-3; IEC 50347; IEC 60072-1; EN 61800-3 : 2001-02 |
| Product certifications | UL; TÜV; cUL |
| Ambient air temperature for operation | 50…65 °C (with power derating of 2 % per °C); 0…50 °C (without derating) |
| Permissible ambient air temperature around the device | 105 °C power amplifier; 110 °C motor |
| Ambient air temperature for storage | -25…70 °C |
| Relative humidity | 15…85 % without condensation |
| Vibration resistance | 20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6 |
| Shock resistance | 150 m/s² 1000 shocks conforming to IEC 60068-2-29 |
| IP degree of protection | IP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5 |
| Logistical informations |
| Country of origin | DE |
| Main |
| Range of product | Lexium integrated drive |
| Product or component type | Motion integrated drive |
| Device short name | ILA |
| Motor type | AC synchronous servo motor |
| Number of motor poles | 6 |
| Network number of phases | Single phase |
| [Us] rated supply voltage | 24 V; 36 V |
| Network type | DC |
| Communication interface | CANopen DS301, integrated |
| Length | 189.3 mm |
| Winding type | Medium speed of rotation and medium torque |
| Electrical connection | Industrial connector |
| Holding brake | Without |
| Gear box type | Without |
| Nominal speed | 3200 rpm at 24 V; 5500 rpm at 36 V |
| Nominal torque | 0.26 N.m |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 8.0 cm |
| Package 1 Width | 19.0 cm |
| Package 1 Length | 39.0 cm |
| Package 1 Weight | 1.8 kg |
Integrated drive from the Lexium ILA1 series. This series of decentralized drives consists of a compact unit of the synchronous servo motor and the associated control electronics with small dimensions. These motors are characterized by their high dynamics and high peak torque. This AC servo has a maximum torque of 0.6 Nm and a continuous torque of 0.26 Nm. The voltage-dependent speed is up to 5500 rpm. The control is via CANopen DS301. A multi-turn encoder with 16384 points/revolution at 4096 revolutions is available as a measuring system. Control inputs for STO are available as a safety function. The supply voltage is 24-36 VDC and the flange size for mounting is 57 mm. Industrial connectors are available for the connection. There is no brake. Thanks to the Green Premium environmental label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.