| Complementary |
| Supply | External source |
| [Us] rated supply voltage | 24 V (20.4…28.8 V)DC |
| Immunity to microbreaks | 10 ms |
| Inrush current | 30 A |
| Power consumption in W | 15 W |
| Local signalling | No indicator |
| Number of pages | Limited by internal memory capacity |
| Operating system | Harmony |
| Processor name | CPU RISC |
| Memory description | Flash NAND, 128 MB; Internal data storage FRAM, 128 kB; Application run DRAM, 128 MB |
| Integrated connection type | 1 serial link - RJ45 - RS232/RS485 (rate: |
| Realtime clock | Built-in |
| Downloadable protocols | Modbus; CANopen; Modbus TCP/IP |
| Fixing mode | By 1 nut - diameter: Ø 22 mm, mounting on: 1...6 mm thick panel |
| Enclosure material | PC/PBT |
| Shock resistance | 147 m/s² for 11 ms (on DIN rail) conforming to IEC 60068-2-27; 294 m/s² for 6 ms (on panel mounting) conforming to IEC 60068-2-27 |
| Vibration resistance | +/- 3.5 mm (f = 5…9 Hz) conforming to IEC 60068-2-6; 1 gn (f = 9…150 Hz) conforming to IEC 60068-2-6 |
| Discrete input number | 2 for fast input (normal mode) conforming to IEC 61131-2 Type 1; 6 for digital input conforming to IEC 61131-2 Type 1 |
| Discrete input voltage | 24 V DC, discrete input logic: sink or source (positive/negative) |
| Number of common point | 1 for fast input (HSC mode); 1 for digital input |
| Discrete input current | 7.83 mA for fast input; 5 mA for digital |
| Input impedance | 2.81 kOhm; 4.7 kOhm |
| Sensor power supply | 15…28.8 V DC >= 15 V, current (state 1): >= 5 mA = 2.5 mA |
| Configurable filtering time | 0 ms no filter (none); 0.004...0.04 ms bounce filter (latch/event and cumulative filter by step Nx0.5ms (64>=N>=2)); 3...12 ms integrator (none/run/stop) |
| Maximum input frequency | 100 kHz for fast input (encoder mode) - control type A/B; 100 kHz for fast input - control type single phase; 100 kHz for fast input - control type pulse/direction |
| Maximum cable distance between devices | Shielded cable: |
| Connection pitch | 3.5 mm |
| Overvoltage protection | With overvoltage protection |
| Isolation between channels and internal logic | 500 V DC |
| Isolation between channels | None |
| Discrete output number | 2 fast output (normal mode), output logic: source; 6 digital output, output logic: source |
| Discrete output voltage | 24 V DC (voltage limit: 19.2...28.8 V) with transistor discrete output(s); 24 V DC (voltage limit: 5...30 V) with relay discrete output(s); 220 V AC (voltage limit: 100...250 V) with relay discrete output(s) |
| Input/output number | 2 for fast input, terminal(s): FI0...FI1; 2 for fast output, terminal(s): FQ0...FQ1; 6 for digital input, terminal(s): DI0...DI5; 6 for digital output, terminal(s): DQ0...DQ5 |
| Discrete output current | 2 A 4 A), response time 5 ms with opening contact for digital output; 2 A 4 A), response time 2 ms with closing contact for digital output; 300 mA, response time 2 ms for fast output (normal mode); 50 mA, response time 2 ms for fast output (PWM or PTO mode) |
| Insulation resistance | > 10 MOhm between the I/O and internal logic; > 10 MOhm between power supply and earth |
| Maximum output frequency | 100 kHz for fast output (PTO mode); 1 kHz for fast output (PWM mode) |
| Absolute accuracy error | +/- 0.1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode); 1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode); +/- 5 % of full scale cyclic ratio 10...90% for fast output (PWM or PTO mode); +/- 10 % of full scale cyclic ratio 20...80% for fast output (PWM or PTO mode); +/- 15 % of full scale cyclic ratio 30...70% for fast output (PWM or PTO mode) |
| Analogue input number | 2 for analog input; 2 for RTDs |
| Analogue input range | 0...20 mA/4...20 mA - resolution: 12 bits, input impedance: 250 Ohm (tolerance: +/- 1 %); -10...+10 V or 0...10 V - resolution: 12 bits + sign, input impedance: >= 1 MOhm |
| Analogue output number | 2 resistive load for 12 bits + sign |
| Analogue output range | 0...20 mA/4...20 mA (> 300 Ohm) for open-circuit; -10...10 V/0...10 V (> 2 kOhm) for short-circuit |
| Height | 50.65 mm |
| Width | 128 mm |
| Depth | 102 mm |
| Net weight | 0.398 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | UL 508; FCC Class A; EN 61131-2; CSA C22.2 No 213 Class I Division 2; ANSI/ISA 12-12-01; IEC 61000-6-2 |
| Product certifications | cULus 508; cUL 1604 Class 1 Division 2; C-Tick; cULus CSA 22-2 No 142; GOST; KCC; UKCA; UKEX |
| Marking | CE |
| Ambient air temperature for operation | 0…50 °C |
| Ambient air temperature for storage | -20…60 °C |
| Relative humidity | 5…85 % without condensation |
| Storage altitude | 0…10000 m |
| Maximum pressure | 800...1114 hPa |
| IP degree of protection | IP20 (rear panel) conforming to IEC 60529; IP65 (front panel) conforming to IEC 60529 |
| NEMA degree of protection | NEMA 4X front panel |
| Pollution degree | 2 conforming to IEC 60664 |
| Environmental characteristic | Corrosive gas free |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Harmony SCU |
| Product or component type | Controller |
| Device presentation | Basic element |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 9.000 cm |
| Package 1 Width | 19.000 cm |
| Package 1 Length | 26.600 cm |
| Package 1 Weight | 870.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 6 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 5.660 kg |
HMI controller Magelis SCU Small. Spare parts. Rear part of HMI controller, 8 digital in/out + 4 analog in/2 analog out. Use as replacement analog controller module for HMISCU.